Termostato controlador de temperatura digital

1. Introducción

The REDPINGUO Temp-01 Digital Temperature Controller Thermostat is an advanced, easy-to-use device designed to precisely control temperature for a wide range of applications. It features both heating and cooling modes, along with versatile timing functions, making it suitable for environments requiring stable temperature regulation such as homebrewing, greenhouses, terrariums, incubators, and more.

2. Características del producto

• Termostato inteligente: Features Heating & Cooling modes with a 1.7m NTC 10K temperature sensor probe. Automatically activates or deactivates connected devices based on your preset target temperatures, ensuring consistent comfort and energy efficiency.
• Fácil instalación y operación: A plug-and-play unit requiring no complex installation or wiring. Simply plug it into a standard 110V AC outlet.
• Amplio rango de temperatura: Controls temperatures from -40℃ to 120℃ (-40℉ to 248℉) with an accuracy of ±1℃.
• Dual Display Units: Allows selection between Celsius (℃) or Fahrenheit (℉) temperature display on the LCD.
• Advanced Timing Functions: Includes F01 Cycle Timer mode, F02 Countdown ON mode, F03 Countdown OFF mode, and F04 Countdown ON and Countdown OFF mode. Timing range is 0 to 99 hours and 59 minutes.
• Amplia aplicación: Suitable for various uses including greenhouses, reptile habitats, incubators, terrariums, freezers, refrigerators, heaters, and homebrew setups.
• Calibración de temperatura: Allows for fine-tuning of temperature readings to ensure accuracy.
• Protección de bloqueo de pantalla: Evita cambios accidentales en la configuración.
• Función de memoria: All current settings are automatically saved and retained even after a power outage.
• Restablecimiento de fábrica: Option to restore the device to its original factory settings.

3. Contenido del paquete

• 1 x REDPINGUO Digital Temperature Controller Thermostat (Model: Temp-01) with integrated 1.7m NTC 10K Sensor

4. Producto terminadoview

The REDPINGUO Temp-01 thermostat features a clear LCD display, intuitive control buttons, a built-in power outlet, and a wired temperature sensor probe.

Figura 1: Frente view of the thermostat with its display and integrated power outlet.

Figure 2: Close-up of the control panel, highlighting the display and buttons.

Figura 3: Posterior view of the thermostat, displaying product information and the power plug.

5. Configuración

1. Deshacer: Retire con cuidado el termostato de su embalaje.
2. Conectar: Insert the thermostat's plug into a standard 110V AC power outlet. The LCD display will illuminate.
3. Sensor de posición: Place the 1.7m temperature sensor probe in the area where you wish to monitor and control the temperature. Ensure the probe is not directly exposed to heat sources or extreme cold that could skew readings.
4. Conectar dispositivo: Plug your heating or cooling appliance into the power outlet on the front of the thermostat.

Figure 4: The thermostat unit plugged into a power source, ready for use.

6. Instrucciones de funcionamiento

The thermostat offers both temperature control and various timing functions. Use the 'MODE', 'SET', 'UP', and 'DOWN' buttons to navigate and adjust settings.

6.1. Modo de control de temperatura

1. View Temperatura actual: The top line of the LCD displays the 'Measured Temperature'.
2. Set Start Temperature (ON): Press the 'SET' button once. The 'Start Temperature' value will flash. Use 'UP' or 'DOWN' buttons to adjust the desired temperature for the device to turn ON. Press 'SET' again to confirm.
3. Set Stop Temperature (OFF): After setting the Start Temperature, press 'SET' again. The 'Stop Temperature' value will flash. Use 'UP' or 'DOWN' buttons to adjust the desired temperature for the device to turn OFF. Press 'SET' again to confirm and exit setting mode.
4. Modo de calefacción: If the 'Start Temperature' is set lower than the 'Stop Temperature', the thermostat operates in heating mode. The connected device will turn on when the measured temperature drops below the Start Temperature and turn off when it reaches the Stop Temperature.
5. Modo de enfriamiento: If the 'Start Temperature' is set higher than the 'Stop Temperature', the thermostat operates in cooling mode. The connected device will turn on when the measured temperature rises above the Start Temperature and turn off when it drops to the Stop Temperature.
6. Switch ℃/℉: Press and hold the 'UP' button for 3 seconds to toggle between Celsius (℃) and Fahrenheit (℉).

6.2. Funciones de temporización

Press the 'MODE' button repeatedly to cycle through the different timing modes (F01, F02, F03, F04) and the temperature control display.

Figura 5: Sobreview of the timing function displays and their corresponding modes.

1. F01: Modo de temporizador de ciclo
   In this mode, you set an ON duration and an OFF duration for the connected device to cycle repeatedly. Press 'SET' to enter editing, use 'UP'/'DOWN' to adjust hours/minutes for ON time, then press 'SET' to move to OFF time, adjust, and press 'SET' again to confirm.
2. F02: Modo de cuenta regresiva activada
   The device will turn ON after a set countdown period. Press 'SET' to enter editing, use 'UP'/'DOWN' to set the countdown hours/minutes, then press 'SET' to confirm.
3. F03: Modo de cuenta regresiva desactivado
   The device will turn OFF after a set countdown period. Press 'SET' to enter editing, use 'UP'/'DOWN' to set the countdown hours/minutes, then press 'SET' to confirm.
4. F04: Countdown ON and Countdown OFF Mode
   This mode combines F02 and F03. You set a countdown for the device to turn ON, and then a separate countdown for it to turn OFF. Press 'SET' to enter editing, set the ON countdown, press 'SET', then set the OFF countdown, and press 'SET' again to confirm.

6.3. Calibración de temperatura

If the measured temperature is inaccurate, you can calibrate the sensor. Press and hold the 'SET' button for 3 seconds to enter the calibration menu. Use 'UP' or 'DOWN' to adjust the offset value (e.g., +0.5℃ or -0.5℉). Press 'SET' to save and exit.

6.4. Screen Lock Protection

To prevent accidental changes, the screen can be locked. Press and hold the 'MODE' button for 3 seconds to lock or unlock the screen. A lock icon may appear on the display when locked.

6.5. Función de memoria

The thermostat is equipped with a memory function. All your configured settings (temperature and timing modes) will be automatically saved and restored in case of a power interruption.

6.6. Restablecimiento de fábrica

To restore the thermostat to its original factory settings, press and hold the 'DOWN' button for 3 seconds. Confirm the reset if prompted.

7. Mantenimiento

• Limpieza: Limpie la unidad con un paño suave y seco. No utilice limpiadores abrasivos ni la sumerja en agua.
• Cuidado del sensor: Ensure the temperature sensor probe is kept clean and free from debris for accurate readings. Avoid bending or damaging the sensor cable.
• Almacenamiento: When not in use for extended periods, store the thermostat in a cool, dry place away from direct sunlight and extreme temperatures.

8. Solución de problemas

• La pantalla no funciona: Ensure the unit is properly plugged into a live 110V AC outlet. Check the power source.
• Lectura de temperatura inexacta: Verify the temperature sensor probe is correctly positioned and not damaged. Perform a temperature calibration (refer to Section 6.3).
• El dispositivo no se enciende ni se apaga: Check that the Start and Stop temperatures are set correctly for either heating or cooling mode. Ensure the connected appliance is functioning properly and is plugged securely into the thermostat's outlet.
• Configuración no guardada: The unit has a memory function. If settings are not retained, ensure the unit is not being subjected to extreme electrical fluctuations.

9. Especificaciones

10. Garantía y soporte

For warranty information, technical support, or service inquiries, please refer to the documentation included with your product packaging or visit the official REDPINGUO websitio. Guarde su recibo de compra para reclamos de garantía.