Kruger Matz Smarfon Live 9 Phone Case Instruction Manual

1. Introducción

This manual provides instructions for the Generic CSKB-LV phone case, designed for the Kruger Matz Smarfon LIVE 9. This case offers protection and enhanced functionality through its integrated 360-degree rotatable ring holder and magnetic car mount compatibility.

Figura 1: Sobreview of the Generic CSKB-LV Phone Case.

2. Características principales

• Soporte de anillo giratorio 360: Proporciona un agarre seguro y funciona como soporte para manos libres. viewEn.
• Función de soporte magnético para coche: Integrated metal plate allows direct adsorption to magnetic car mount holders (car mount not included).
• Material duradero: Constructed from a PC backplane and silicone soft frame for scratch-proof and fingerprint-proof protection.
• Diseño a prueba de golpes: Features thickened four corners and a silicone buffer layer for enhanced impact resistance.
• Recortes de precisión: Ensures full access to all ports, buttons, and speakers of the Kruger Matz Smarfon LIVE 9.

Figure 2: Illustration of the case's shockproof design with reinforced corners.

3. Instalación

1. Ensure your Kruger Matz Smarfon LIVE 9 is clean and free of dust or debris.
2. Alinee el teléfono con la funda, comenzando por un lado.
3. Presione suavemente el teléfono dentro del estuche, asegurándose de que todas las esquinas y los bordes estén bien ajustados.
4. Verifique que todos los puertos, botones y recortes de la cámara estén alineados correctamente con su teléfono.

4. Operación y uso

4.1. Using the 360 Rotatable Ring Holder

The integrated ring holder can be rotated 360 degrees for comfortable one-hand operation or used as a kickstand for media viewEn.

• Para agarre: Slide your finger through the ring for a more secure hold on your phone, reducing the risk of accidental drops.
• For Kickstand: Gire el anillo hasta el ángulo deseado y apoye el teléfono sobre una superficie plana para usar las manos libres. viewción de vídeos o videollamadas.

Figure 3: Demonstrating one-hand operation and extended reach with the ring holder.

4.2. Magnetic Car Mount Compatibility

The case features a built-in metal plate that allows it to be directly attached to magnetic car mount holders. No additional patches are required.

• Ensure your magnetic car mount is securely installed in your vehicle.
• Simply place the back of the phone case onto the magnetic surface of the car mount. The integrated metal ring will adhere to the magnet.
• Note: Magnetic car mount holder is not included with this product. Wireless charging may not be supported while the case is attached to a magnetic mount or if the metal ring interferes with the charging coil.

Figure 4: Illustrating the magnetic car mount compatibility feature.

5. Cuidado y mantenimiento

Para mantener la funda de tu teléfono en óptimas condiciones:

• Limpie la carcasa periódicamente con un paño suave y húmedo.amp paño.
• Avoid using harsh chemicals or abrasive cleaners, as these may damage the material or finish.
• Remove the phone from the case periodically to clean any accumulated dust or debris between the phone and the case.

6. Solución de problemas

Problema: La funda no encaja correctamente.

Solución: Ensure the case is specifically designed for the Kruger Matz Smarfon LIVE 9. Double-check that the phone is correctly aligned and fully seated within the case, with no obstructions.

Issue: Magnetic car mount not holding securely.

Solución: Verify that your car mount is a magnetic type and is functioning correctly. Ensure there is no debris or thick material between the case and the car mount that could weaken the magnetic connection.

7. Especificaciones

8. Garantía y soporte

This product is covered by a standard manufacturer's warranty. For specific warranty details or technical support, please refer to the seller's information on the purchase platform or contact the manufacturer directly.

For further assistance, please contact your retailer or the manufacturer, Generic.