Introducción
This manual provides essential information for the safe assembly, operation, and maintenance of your CLP Lex Fabric Bar Stool. Please read these instructions carefully before use and retain them for future reference.
Información de seguridad
- Asegúrese de que todos los componentes estén presentes y sin daños antes del montaje. No lo utilice si alguna pieza falta o está rota.
- Monte el taburete sobre una superficie suave y limpia para evitar rayones.
- Tighten all screws and bolts securely. Periodically check and re-tighten as necessary.
- No se suba al taburete. Está diseñado únicamente para sentarse.
- No exceda la capacidad máxima de peso de 100 kg (220 lbs).
- Mantenga a los niños alejados del área de montaje. Las piezas pequeñas pueden suponer un peligro de asfixia.
- Utilice el taburete sobre una superficie plana y estable para evitar que se vuelque.
Capacidad máxima de carga: 100 kg.
Contenido del paquete
Verifique que todos los siguientes componentes estén incluidos en su paquete:
- Asiento (1x)
- Cilindro de elevación de gas (1x)
- Base (1x)
- Anillo de reposapiés (1x)
- Herrajes de montaje (tornillos, arandelas, llave Allen)
- Floor Protector (pre-installed on base or separate)
Instrucciones de montaje
Follow these steps to assemble your CLP Lex Bar Stool:
- Attach the Footrest Ring: Carefully insert the footrest ring into the designated slot on the gas lift cylinder. Ensure it is firmly seated.
- Insertar el elevador de gas en la base: Place the large circular base on a flat surface. Insert the wider end of the gas lift cylinder into the central hole of the base. The gas lift should sit securely in the base.
- Conecte el asiento al elevador de gas: Align the mounting plate on the underside of the seat with the top of the gas lift cylinder. Secure the seat to the gas lift using the provided screws and Allen key. Ensure all screws are tightened evenly and securely.
- Comprobación final: Once assembled, gently test the stability of the stool. Ensure all connections are tight and the stool does not wobble.
Images illustrating the stool's base and metal frame components for assembly.
Instrucciones de funcionamiento
The CLP Lex Bar Stool features adjustable height and 360-degree swivel functionality for optimal comfort and versatility.
- Ajuste de altura: To adjust the seat height, locate the lever under the seat.
- To raise the seat: Lift the lever while standing up, allowing the gas lift to extend. Release the lever at the desired height.
- To lower the seat: Lift the lever while seated, applying slight pressure to the seat. Release the lever at the desired height.
- Giro de 360 grados: The seat can freely rotate 360 degrees. Simply turn the seat in any direction to adjust your position.
Video demonstrating the height adjustment and 360-degree swivel features of the bar stool.
Mantenimiento y cuidado
El cuidado adecuado prolongará la vida y la apariencia de su taburete de bar.
- Tapicería de tela:
- Regularly vacuum the fabric to remove dust and loose particles.
- En caso de derrame, seque inmediatamente con un paño limpio y seco. No frote.
- For stubborn stains, use a mild fabric cleaner according to the product instructions. Test on an inconspicuous area first.
- Evite la luz solar directa para evitar la decoloración.
- Metal Frame (Chrome):
- Limpie con un paño suave y seco.amp paño.
- Avoid abrasive cleaners or harsh chemicals, as these can damage the chrome finish.
- Seque inmediatamente con un paño limpio para evitar manchas de agua.
- General:
- Revise periódicamente todos los tornillos y pernos y vuelva a apretarlos para garantizar la estabilidad.
- Ensure the floor protectors on the base are intact to prevent scratching your floor.
Ensure floor protectors are in place and clean the stool regularly.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El taburete se tambalea después del montaje. | Los tornillos no están completamente apretados o están apretados de manera desigual. | Check and re-tighten all assembly screws evenly. Ensure the stool is on a flat surface. |
| Height adjustment not working smoothly. | Gas lift mechanism may be stiff or obstructed. | Ensure no obstructions are blocking the lever. Apply slight pressure to the seat when lowering, or stand up completely when raising. If the issue persists, contact customer support. |
| Stool makes noise when swiveling. | Lack of lubrication in the swivel mechanism or loose connection. | Check if the seat is securely attached to the gas lift. A small amount of silicone spray lubricant might help if the noise is from the swivel mechanism (apply sparingly and wipe excess). |
Presupuesto
| Característica | Detalle |
|---|---|
| Nombre del modelo | Lex |
| Marca | CLP |
| Altura total | 89 - 110 cm (ajustable) |
| Ancho total | 45 centímetros |
| Profundidad total | 46 centímetros |
| Altura del asiento | 59 - 80 cm (ajustable) |
| Dimensiones del asiento (An x Pr) | 45.5 x 38 centímetros |
| Altura del respaldo | 32 centímetros |
| Altura del reposapiés | 19 - 40 centímetros |
| Capacidad de peso | 100 kilogramos |
| Peso del producto | 6 kilogramos |
| Material del marco | Metal (cromo) |
| Material del asiento | Tejido de poliéster |
| Requiere ensamblaje | Sí |
| Características especiales | Adjustable Height, Swivel, Footrest |
Detailed dimensions of the CLP Lex Bar Stool.
Garantía y soporte
Your CLP Lex Bar Stool is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, claims, or technical support, please contact CLP customer service through the retailer where you purchased the product or visit the official CLP websitio.
For more information about CLP products, visit the CLP Store on Amazon.