Introducción
This manual provides instructions for the safe and effective use of your Generic Universal 2-Pin Magnetic Smartwatch Charging Cable. This cable is designed to provide a convenient charging solution for various smartwatches that utilize a 2-pin magnetic charging interface, including models like the Mobo Beat mbsw-11.
Please read this manual thoroughly before using the product to ensure proper operation and longevity.
Producto terminadoview
The charging cable features a USB-A connector on one end and a magnetic 2-pin charging head on the other. The magnetic connection ensures a secure fit to your smartwatch's charging contacts.
Image: The Generic Universal 2-Pin Magnetic Smartwatch Charging Cable, showing the USB-A connector and the magnetic 2-pin charging head.
Compatibilidad y configuración
Before using the charger, it is crucial to verify compatibility with your smartwatch. This charger is designed for smartwatches with a 2-pin magnetic charging interface and a pin separation of approximately 3mm to 4mm.
Comprobando compatibilidad:
- Identify Charging Pins: Locate the two metal charging pins on the back of your smartwatch.
- Measure Pin Separation: Carefully measure the distance between the centers of these two pins. The distance should be approximately 3mm to 4mm for optimal compatibility.
- Compare with Charger: Ensure the magnetic charging head of the cable also has a similar pin separation.
The video below demonstrates how to check compatibility:
Video: Guide on how to determine if your smartwatch is compatible with this charger by measuring the pin separation.
Configuración inicial:
- Unpack the charging cable.
- Ensure your smartwatch's charging pins are clean and free of debris.
Instrucciones de funcionamiento
- Conéctese a la fuente de alimentación: Plug the USB-A end of the charging cable into a compatible USB power source, such as a computer's USB port, a USB wall adapter, or a power bank.
- Conectar al reloj inteligente: Carefully align the magnetic 2-pin charging head with the charging contacts on the back of your smartwatch. The magnetic design will help secure the connection.
- Verificar conexión: Your smartwatch should indicate that it is charging (e.g., a charging icon or battery percentage increase). If it does not charge, try reversing the orientation of the magnetic charging head, as some smartwatches may require a specific polarity.
- Carga completa: For optimal battery life, it is recommended to fully charge your smartwatch before its first use and whenever the battery is low.
- Desconectar: Once charging is complete, gently detach the magnetic charging head from your smartwatch and unplug the USB cable from the power source.
Mantenimiento y cuidado
- Limpieza: Use a soft, dry cloth to clean the charging pins on both the cable and your smartwatch regularly. Avoid using liquids or abrasive cleaners.
- Almacenamiento: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tangling the cable to prevent damage.
- Manejo: Do not pull the cable forcefully to disconnect it. Always grasp the connector ends. Avoid bending the cable sharply, especially near the connectors, to prevent internal wire damage.
- Seguridad: Do not expose the cable to water or moisture. Do not attempt to disassemble or repair the cable yourself.
Solución de problemas
- El reloj inteligente no se carga:
- Asegúrese de que el cable USB esté conectado de forma segura a una fuente de alimentación que funcione.
- Check that the magnetic charging head is correctly aligned with the smartwatch's charging pins.
- Try reversing the magnetic charging head's orientation.
- Limpia los pines de carga tanto del cable como del reloj inteligente.
- Pruebe con una fuente de alimentación USB diferente.
- Verify that your smartwatch is compatible with a 2-pin magnetic charger with 3-4mm pin separation.
- Carga lenta:
- Ensure the power source provides sufficient output (e.g., a standard USB wall adapter is usually better than a computer USB port for faster charging).
- Avoid using the smartwatch while it is charging.
- La conexión magnética es débil:
- Ensure there is no debris or foreign objects between the charger and the smartwatch.
- The magnetic strength is designed to hold the charger in place; it may not be extremely strong to allow for easy removal.
Presupuesto
| Marca | Genérico |
| Número de modelo | Universal 2-Pin Magnetic Charger |
| Tipo de conector | Magnético de 2 pines |
| Tipo de cable | USB-A |
| Longitud del cable | 60 cm (aproximadamente 23.6 pulgadas) |
| Pin Separation | Approximately 3mm - 4mm |
| Color | Negro |
| Material | Plástico |
| Peso | 12 Grams (approximately 0.42 oz) |
| Dispositivos compatibles | Smartwatches with 2-pin magnetic charging, e.g., Mobo Beat mbsw-11 |
Garantía y soporte
Este producto está cubierto por una garantía estándar del fabricante contra defectos de materiales y mano de obra. Consulte la documentación de compra para conocer los términos y la duración de la garantía.
Para obtener asistencia técnica, asistencia para la resolución de problemas o reclamaciones de garantía, comuníquese directamente con el vendedor o el fabricante. Conserve su comprobante de compra para validar la garantía.
