1. Introducción
The Generic SALT ONE XL Halogenerator is a portable device designed to disperse fine salt particles (aerosols) into an enclosed space, facilitating halotherapy sessions. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your halogenerator. Please read this manual thoroughly before initial use and retain it for future reference.
2. Información de seguridad
Tenga en cuenta las siguientes precauciones de seguridad para evitar lesiones o daños al dispositivo:
- Always use the halogenerator in a dry environment. Avoid exposure to water or excessive humidity.
- Ensure the power supply matches the device's requirements (60 watts).
- Do not obstruct the air intake or exhaust vents during operation.
- Mantener fuera del alcance de los niños y las mascotas.
- Only use pharmaceutical-grade salt specifically designed for halogenerators.
- No intente abrir ni reparar el dispositivo usted mismo. Consulte a personal de servicio técnico cualificado.
- Las declaraciones sobre los suplementos dietéticos no han sido evaluadas por la FDA y no pretenden diagnosticar, tratar, curar o prevenir ninguna enfermedad o condición de salud.
3. Contenido del paquete
Verifique que todos los artículos estén presentes en el paquete:
- SALT ONE XL Halogenerator Unit
- Adaptador de corriente
- Manual de usuario
- Cepillo de limpieza
- Initial Salt Supply (may vary)
4. Configuración
4.1 Colocación
Place the halogenerator on a stable, flat surface or mount it securely on a wall within the salt room or desired application area. Ensure adequate air circulation around the unit.
Figura 4.1: Frente view of the SALT ONE XL Halogenerator.
4.2 Conexión de alimentación
Connect the provided power adapter to the halogenerator's power input port, then plug the adapter into a standard electrical outlet.
4.3 Salt Loading
Open the salt chamber cover located on the top of the unit. Carefully pour the recommended amount of pharmaceutical-grade salt into the chamber. Close the cover securely before operation.
Figura 4.2: Arriba view of the halogenerator showing the salt chamber.
Figura 4.3: Example of a halotherapy room environment.
5. Instrucciones de funcionamiento
5.1 Encendido / Apagado
Press the power button on the control panel to turn the unit on. The display will illuminate. Press the button again to turn the unit off.
5.2 Session Programming
The SALT ONE XL Halogenerator offers unlimited programming capabilities, often controlled via a mobile application. Refer to the specific mobile application's instructions for detailed programming steps, including session duration, salt concentration, and fan speed settings.
5.3 Operación de Monitoreo
During operation, the device will quietly disperse salt aerosols. Monitor the control panel for any status indicators or error messages. Ensure the salt chamber has sufficient salt for the duration of the session.
6. Mantenimiento
6.1 Limpieza Regular
To ensure optimal performance and longevity, regularly clean the halogenerator. Use the provided cleaning brush to remove any salt residue from the grinding mechanism and the salt chamber. Wipe the exterior with a dry, soft cloth.
6.2 Salt Chamber Care
Periodically inspect the salt chamber for any blockages or excessive build-up. Ensure the chamber is completely dry before adding new salt. Do not use water or liquid cleaners inside the salt chamber.
7. Solución de problemas
Consulte la siguiente tabla para conocer los problemas más comunes y sus soluciones:
| Problema | Posible causa | Solución |
|---|---|---|
| El dispositivo no se enciende. | No hay fuente de alimentación; conexión suelta. | Check power adapter connection and wall outlet. Ensure power button is pressed. |
| Device beeps continuously and does not emit salt particles. | Salt chamber empty; salt residue blockage; grinder malfunction. | Check salt level in chamber. Clean the salt grinding mechanism thoroughly. If problem persists, contact customer support. |
| Low salt aerosol output. | Insufficient salt; clogged grinding mechanism; incorrect settings. | Refill salt chamber. Clean the grinding mechanism. Verify programming settings via mobile application. |
| Ruido inusual durante el funcionamiento. | Foreign object in grinder; worn components. | Turn off and unplug the device. Carefully inspect the salt chamber for any foreign objects. If noise continues, contact customer support. |
8. Especificaciones
| Característica | Detalle |
|---|---|
| Dimensiones del producto | 7" de profundidad x 7" de ancho x 20" de alto (7 x 7 x 20 pulgadas) |
| Quétage | 60 vatios |
| Tipo de controlador | Aplicación móvil |
| Área de cobertura | Hasta 250 pies cuadrados |
| Aerosol Particle Size | More than 98% below 2 microns |
| Fabricante | MM Personal Services |
| Color | Blanco |
9. Garantía y soporte
9.1 Información de garantía
The Generic SALT ONE XL Halogenerator comes with a one-year global warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or failure to follow instructions in this manual.
9.2 Atención al cliente
For technical assistance, warranty claims, or inquiries regarding your halogenerator, please contact the manufacturer or your point of purchase. Have your product model and purchase date ready when contacting support.
