1. Introducción
Thank you for choosing the DEWENWILS 24 Hour Programmable Digital Timer Outlet. This device is designed to automate the on/off cycles of your electrical appliances, such as indoor lamps, fans, and aquarium equipment, enhancing convenience and promoting energy efficiency. Please read this manual thoroughly before use to ensure proper operation and safety.
Información de seguridad
- Solo para uso en interiores. No exponer a la lluvia ni a la humedad.
- Do not exceed the maximum load rating of 125V/15A/1000W.
- Asegúrese de que el dispositivo esté enchufado de forma segura a una toma de corriente con conexión a tierra.
- Do not disassemble or attempt to repair the unit. Contact customer support if service is required.
- Mantener fuera del alcance de los niños.
2. Características del producto
- Programa de repetición diaria en 3 grupos: Program up to three distinct ON/OFF schedules that repeat daily. Easily switch between Always On, Auto, or Always Off modes using the side switch. The large display shows current settings for clear visibility.
Image: DEWENWILS Digital Timer Outlet displaying three programmable daily repeat schedules.
- Diseño compacto y que ahorra espacio: El profesional delgadofile ensures that the timer does not obstruct adjacent outlets, maintaining full use of your wall receptacles. Its minimalist aesthetic blends with various home decors.
Image: DEWENWILS Digital Timer Outlet plugged into a wall, highlighting its compact size and non-obstructive design.
- Memory Function & Silent Operation: An internal Ni-MH battery preserves programmed settings for up to three months during power outages or disconnections. The timer operates silently, making it suitable for bedrooms and quiet environments.
Image: DEWENWILS Digital Timer Outlet in a bedroom setting, indicating silent operation.
- Preciso y confiable: Programs can be set precisely to the minute, ensuring reliable automatic control of your devices. This helps save energy and provides security by making your home appear occupied.
Image: Close-up of the timer's digital display, demonstrating minute-level programming accuracy.
- Auto/Manual Control: A convenient side switch allows for quick selection between ON (always on), AUTO (programmed schedule), and OFF (always off) modes.
Imagen: Lateral view of the timer showing the ON/AUTO/OFF selection switch.
3. Contenido del paquete
- DEWENWILS 24 Hour Programmable Digital Timer Outlet (2 units)
- Manual de instrucciones
4. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | HIDT22X |
| Volumentage | 125 V~, 60 Hz |
| Calificación actual | 15A |
| Potencia nominal | 1000 W |
| Tipo de salida | 1 Grounded Outlet, 3-Prong |
| Número de programas | 3 programas ON/OFF por día |
| Tiempo mínimo de fraguado | 1 minuto |
| Tipo de batería | Ni-MH (for memory backup) |
| Dimensiones del producto | 1.54" de profundidad x 3.45" de ancho x 1.52" de alto |
| Material | Plástico |
5. Instrucciones de configuración
Follow these steps to prepare your timer for use:
- Reiniciar el temporizador: Before initial use or after a prolonged period of disuse, reset the timer. Use a small, pointed object (like a paperclip) to press the recessed 'R' (Reset) button. The display will clear, and the timer will be ready for programming.
- Establecer hora actual:
- Press and hold the 'Time' button.
- While holding 'Time', press the 'Hour' button to adjust the current hour.
- While holding 'Time', press the 'Min' button to adjust the current minute.
- Release the 'Time' button when the correct time is set. The AM/PM indicator will change accordingly.
- Enchufe al tomacorriente: Insert the timer into a standard 3-prong grounded wall outlet. Ensure it is firmly seated.
Image: Visual guide for resetting the timer, setting the current time, and programming schedules.
6. Instrucciones de funcionamiento
Programación de horarios de encendido y apagado
The timer allows for up to 3 ON/OFF programs per day.
- Press the 'Prog' button once to enter Program 1 ON setting. The display will show '1 ON'.
- Press the 'Hour' button to set the desired ON hour for Program 1.
- Press the 'Min' button to set the desired ON minute for Program 1.
- Press 'Prog' again to enter Program 1 OFF setting. The display will show '1 OFF'.
- Press the 'Hour' button to set the desired OFF hour for Program 1.
- Press the 'Min' button to set the desired OFF minute for Program 1.
- Repeat steps 1-6 for Program 2 and Program 3 if needed. Each press of 'Prog' cycles through '1 ON', '1 OFF', '2 ON', '2 OFF', '3 ON', '3 OFF', and then returns to the current time display.
- To exit programming mode at any time, simply stop pressing buttons for approximately 30 seconds, or press the 'Time' button.
- To cancel a specific timing program, press and hold the 'Prog' button while the desired program (e.g., '1 ON') is displayed. The program will be cleared.
Using the ON/AUTO/OFF Switch
The slide switch on the side of the timer controls its operating mode:
- EN: The connected appliance will remain continuously ON, overriding all programmed schedules.
- COCHE: The connected appliance will operate according to the programmed ON/OFF schedules. The display will show 'ON AUTO' or 'OFF AUTO' depending on the current state. This is the recommended mode for automated control.
- OFF: The connected appliance will remain continuously OFF, overriding all programmed schedules.
Imagen: Examples of devices that can be controlled by the DEWENWILS Digital Timer Outlet.
7. Mantenimiento
- Limpieza: Desconecte el temporizador de la toma de corriente antes de limpiarlo. Limpie el exterior con un paño suave y seco. No utilice limpiadores líquidos ni productos abrasivos.
- Batería: The internal Ni-MH battery is maintenance-free and recharges automatically when the timer is plugged into an active outlet. No user replacement is necessary.
- Almacenamiento: If storing the timer for an extended period, ensure it is fully charged by plugging it in for at least 24 hours. Store in a cool, dry place.
8. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Timer display is blank or flickering. | No power to the outlet; internal battery discharged. | Check the wall outlet with another device. Plug the timer into a live outlet for at least 4 hours to charge the internal battery. |
| El aparato no se enciende ni se apaga en los horarios programados. | El temporizador no está en modo AUTOMÁTICO; configuración de programa incorrecta; el aparato está defectuoso. | Ensure the side switch is set to 'AUTO'. Verify program settings (ON/OFF times) are correct. Test the appliance by plugging it directly into a wall outlet. |
| Cannot set programs or current time. | Es necesario reiniciar el temporizador. | Press the 'R' (Reset) button with a pointed object and re-attempt programming. |
| Los programas se pierden después de un corte de energíatage. | Internal battery is fully discharged or faulty. | Plug the timer into a live outlet for 24 hours to fully charge the internal battery. If the issue persists, contact customer support. |
9. Garantía y soporte
DEWENWILS products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship under normal use. For specific warranty details, please refer to the product packaging or contact DEWENWILS customer support.
If you encounter any issues or have questions regarding your DEWENWILS 24 Hour Programmable Digital Timer Outlet, please do not hesitate to contact our customer support team. Our dedicated team is available to assist you with troubleshooting, product information, and any other inquiries.
Información del contacto:
Por favor visite el sitio oficial de DEWENWILS website or refer to your product packaging for the most up-to-date contact details, including email and phone support.