Phanteks Revolt 1200W 80PLUS Platinum ATX 3.0 PCIe 5.0 Power Supply Unit Instruction Manual

1. Introducción

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Phanteks Revolt 1200W 80PLUS Platinum Power Supply Unit. Please read this manual thoroughly before installation and retain it for future reference.

The Phanteks Revolt series power supplies are designed for high performance, offering full support for Intel ATX 3.0 specifications and PCIe 5.0, with 80 Plus Platinum efficiency. This unit is sold without cables, allowing users to select custom modular cables (e.g., from CableMod) to suit their specific system requirements.

2. Información de seguridad

ADVERTENCIA: La instalación o el uso incorrectos pueden provocar daños en el equipo, descargas eléctricas o lesiones graves. Siga siempre estas normas de seguridad:

• Asegúrese de que la fuente de alimentación esté desconectada de la toma de corriente de CA antes de la instalación, extracción o cualquier mantenimiento.
• Esta fuente de alimentación está diseñada exclusivamente para sistemas informáticos. No la utilice para ningún otro fin.
• No abra la fuente de alimentación. Alto volumen.tagHay es en el interior y no hay piezas que el usuario pueda reparar. Abrir la unidad anulará la garantía.
• Instale la fuente de alimentación en un área bien ventilada, lejos de fuentes de calor, luz solar directa y humedad.
• Use only approved and compatible modular cables. This power supply unit does not include cables; they must be purchased separately.
• Asegúrese de que todos los conectores estén bien colocados antes de encender el sistema.
• Mantener fuera del alcance de los niños.

Características de protección: The Phanteks Revolt power supply includes multiple protection mechanisms to ensure system stability and safety:

• OPP (Overpower Protection): Prevents damage from excessive total power output.
• OVP (sobre vol.tage Protección): Safeguards components from voltage picos.
• UVP (bajo vol.tage Protección): Protege contra el volumen insuficientetage entrega.
• SCP (Protección contra cortocircuitos): Previene daños por cortocircuitos.
• OCP (Protección contra sobrecorriente): Protects against excessive current on individual rails.
• OTP (Protección contra sobretemperatura): Apaga la unidad si las temperaturas internas se vuelven demasiado altas.
• Protección sin carga: Ensures stable operation even without a load.
• Protección de reinicio: Allows the unit to recover safely after a protection event.

3. Contenido del paquete

Verifique que todos los artículos estén presentes en su paquete:

• 1x Phanteks Revolt 1200W Power Supply Unit (Model: PH-P1200PR_BK01C)
• 1x C14 (female) - C13 (male) Power cord (1500mm)
• 1x User’s manual (this document)
• 1x guía de instalación
• 1x PSU bag
• 1x Zip tie bag
• 1x paquete de tornillos
• 1x Velcro pack
• 1x PSU tester

Note: Modular cables are NOT included with this power supply unit and must be purchased separately.

4. Producto terminadoview

4.1 Características principales

• Salida de CC de 1200 W: Proporciona ample power for high-performance systems.
• Certificación 80 PLUS Platinum: Achieves up to 94% efficiency at 50% load, reducing power consumption and heat.
• Compatible con ATX 3.0 y PCIe 5.0: Fully supports the latest Intel ATX 3.0 specifications and includes a 12VHPWR connector for PCIe 5.0 GPUs, delivering up to 600W.
• Diseño totalmente modular: Allows for custom cable selection and improved cable management. Cables are sold separately.
• Ventilador con cojinetes fluidodinámicos (FDB) de 135 mm: Ensures quiet and efficient cooling with hybrid fan control for silent operation.
• High Peak Power Capability: Designed to handle power peaks up to 235% of its rated output, exceeding industry standards.
• Seasonic Collaboration: Developed with Seasonic to ensure high standards of performance and reliability.

4.2 Dimensiones físicas y componentes

The Phanteks Revolt 1200W PSU measures 160 mm (L) x 150 mm (W) x 86 mm (H) (6.3 in x 5.9 in x 3.4 in) and weighs 2.26 kg (4.98 lbs).

Frente View (Fan Side)

Modular Cable Connectors

Custom Cable Compatibility

Internal Design (Seasonic Platform)

Important Note: Cables Not Included

Panel trasero

Revolt Series Comparison

5. Configuración e instalación

Before proceeding, ensure your system is powered off and disconnected from the AC outlet. Refer to your computer case and motherboard manuals for specific installation instructions.

5.1 Preparación para la instalación

1. Recopilar componentes: Ensure you have the Phanteks Revolt PSU, your chosen modular cables (not included), mounting screws, and your computer case.
2. Descarga estática: Ground yourself to prevent electrostatic discharge (ESD) by touching a grounded metal object before handling components.

5.2 Instalación de la fuente de alimentación

1. Monte la fuente de alimentación: Carefully slide the Phanteks Revolt PSU into the designated power supply bay in your computer case. Secure it with the provided screws.
2. Conectar cables modulares: This PSU is fully modular. Connect only the necessary cables to the PSU's modular ports. Refer to the "Modular Cable Connectors" image in Section 4.2 for port identification.
   • Connect the 18+10pin cable to the motherboard.
   • Connect 8pin cables for CPU and PCIe as required by your motherboard and graphics card(s). The 12VHPWR connector is specifically for PCIe 5.0 GPUs.
   • Connect 6pin cables for SATA devices (SSDs, HDDs) and Molex peripherals.
3. Cables de ruta: Route the connected cables neatly through your case for optimal airflow and aesthetics.
4. Conectarse a los componentes: Connect the other end of each modular cable to its respective component (motherboard, CPU, GPU, storage drives, etc.). Ensure all connections are firm and secure.
5. Cable de alimentación de CA: Connect the provided C14-C13 AC power cord to the PSU's AC inlet. Do not connect to a wall outlet yet.

6. Instrucciones de funcionamiento

6.1 Encendido inicial

1. After all internal connections are made and secured, connect the AC power cord from the PSU to a grounded wall outlet or surge protector.
2. Flip the main power switch on the rear of the PSU to the "ON" (I) position.
3. Power on your computer system using the case's power button.

6.2 Control de ventilador híbrido

The Phanteks Revolt PSU features a 135mm Fluid Dynamic Bearing fan with hybrid fan control. A switch on the rear panel allows you to toggle between fan modes:

• Hybrid Mode (Default): The fan remains off under low loads for silent operation and only spins up when the power supply reaches a certain temperature or load threshold.
• Modo siempre activo: The fan operates continuously, providing constant cooling. This mode may result in slightly higher noise levels but ensures maximum cooling performance.

Select the mode that best suits your preference for noise and cooling.

7. Solución de problemas

If your system does not power on or experiences instability, refer to the following common troubleshooting steps:

• Sin energía:
  • Asegúrese de que el cable de alimentación de CA esté conectado de forma segura tanto a la fuente de alimentación como a la toma de pared.
  • Verify the main power switch on the PSU is in the "ON" (I) position.
  • Check the wall outlet or surge protector for power. Try a different outlet.
  • Use the included PSU tester to verify if the power supply is functioning independently.
• Inestabilidad del sistema/apagados aleatorios:
  • Ensure all modular cables are firmly connected to both the PSU and the components. Loose connections can cause instability.
  • Verify that you are using the correct cables for each component (e.g., CPU power to CPU, PCIe power to GPU).
  • Check for any signs of overheating. Ensure proper airflow within your case.
  • If using the hybrid fan mode, try switching to "Always On" mode to see if it resolves temperature-related issues.
• El ventilador no gira:
  • In hybrid fan mode, the fan will not spin under low loads or temperatures. This is normal operation.
  • If the fan does not spin even under load or in "Always On" mode, contact Phanteks support.
• Olor a quemado o humo:
  • Immediately disconnect the AC power cord from the wall outlet. Do not attempt to power on the system again.
  • Contact Phanteks support immediately.

For further assistance, please refer to the Phanteks support websitio o póngase en contacto con su servicio de atención al cliente.

8. Especificaciones

9. Garantía y soporte

9.1 Garantía del fabricante

The Phanteks Revolt 1200W Power Supply Unit is covered by a Garantía del fabricante de 1 años A partir de la fecha de compra. Esta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso. Conserve su comprobante de compra para reclamaciones de garantía.

La garantía no cubre daños resultantes de:

• Instalación u operación incorrecta.
• Modificaciones o reparaciones no autorizadas.
• Accidental damage, abuse, or misuse.
• Desastres naturales o causas externas.

Opening the power supply unit will void the warranty.

9.2 Soporte técnico

For technical assistance, troubleshooting, or warranty inquiries, please visit the official Phanteks websitio o póngase en contacto con su servicio de atención al cliente:

Soporte de Phanteks Websitio

Please have your product model number (PH-P1200PR_BK01C) and proof of purchase ready when contacting support.