TechCare Massager Plus 24
Manual del usuario del masajeador electrónico de pulso TechCare Massager Plus 24
Model: Plus 24
Introducción
The TechCare Massager Plus 24 is a rechargeable electronic pulse massager designed for temporary relief of pain associated with sore and aching muscles. It is suitable for use on the shoulder, waist, back, upper extremities, and lower extremities, often due to strain from exercise or normal household work activities.
Image: The TechCare Massager Plus 24 device, shown with various electrode pads and accessories.
Características principales
- 24 modos de masaje: Includes stimulation options such as Tapping, Acupuncture, Deep Tissue, Foot, Cupping, and Combo.
- Temporizador ajustable: Set treatment duration from 10 to 60 minutes using the "T" button.
- Batería recargable: Features an internal lithium battery providing up to 20 hours of continuous use.
- Dual Output (A-B): Allows for simultaneous use by two separate users or on two different body areas.
- Pantalla LCD grande: Provides an easy-to-read interface, enhancing usability for all users.
Imagen: Representación visual de los 24 modos de masaje disponibles.
Guía de configuración
- Cargue el dispositivo: Before first use, fully charge the internal lithium battery using the provided USB cable and AC wall plug.
- Colocar las almohadillas de electrodos: Snap the electrode pads onto the pad cables. Ensure the device is turned OFF before connecting the cables.
- Aplicar las almohadillas sobre la piel: Place the electrode pads firmly on clean, dry skin in the desired treatment area. Refer to the included pad placement guide for optimal positioning.
- Encender el dispositivo: Locate the ON/OFF switch on the side of the device and slide it to the 'ON' position.
- Seleccionar modo: Use the 'M' button to cycle through the 24 available massage modes.
- Ajustar intensidad: Use the '+' and '-' buttons to increase or decrease the intensity level until a comfortable sensation is achieved.
- Establecer temporizador: Press the 'T' button to adjust the treatment duration (10-60 minutes).
Image: Step-by-step visual guide for setting up and using the TechCare Massager Plus 24.
Instrucciones de funcionamiento
Encendido/apagado
To turn the device on, slide the power switch located on the side of the unit to the 'ON' position. The LCD screen will illuminate. To turn off, slide the switch back to the 'OFF' position.
Selección de modo
Press the 'M' button to cycle through the 24 pre-programmed massage modes. Each press will advance to the next mode. The selected mode will be displayed on the LCD screen.
Ajuste de intensidad
Use the '+' button to increase the intensity of the pulse and the '-' button to decrease it. Adjust the intensity gradually until you feel a comfortable, stimulating sensation. Avoid setting the intensity too high, which may cause discomfort.
Ajuste del temporizador
The device has an adjustable timer. Press the 'T' button to select the desired treatment duration, ranging from 10 to 60 minutes. The remaining time will be displayed on the screen.
Dual Channel Operation (A-B Output)
The A-B output feature allows for two sets of electrode pads to be used simultaneously, either on different body parts or by two individuals. Each channel (A and B) can have its intensity adjusted independently.
Image: The device's display showing various massage modes and intensity levels.
Mantenimiento
- Limpieza del dispositivo: Limpie el dispositivo con un paño suave, damp paño. No utilice limpiadores abrasivos ni sumerja el dispositivo en agua.
- Cuidado de las almohadillas de electrodos: After each use, place the electrode pads back onto their protective film to maintain their adhesive quality. Store them in a cool, dry place. Replace pads when they lose their stickiness.
- Cargando: Recargue el dispositivo cuando el indicador de batería muestre poca carga. Evite sobrecargarlo durante periodos prolongados.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| No sensation or weak pulse | Pads not properly attached; low battery; intensity too low; faulty cable. | Ensure pads are firmly on skin; recharge device; increase intensity; check cable connections or replace if damaged. |
| El dispositivo no enciende | Battery is completely drained; power switch is off. | Charge the device for at least 30 minutes; ensure power switch is in the 'ON' position. |
| Las almohadillas pierden adherencia | Las pastillas están sucias o desgastadas. | Clean skin before application; gently wipe pads with a damp cloth (do not soak); replace pads if stickiness is not restored. |
Presupuesto
- Modelo: Más 24
- Fuente de energía: 1 batería de iones de litio (incluida)
- Dimensiones: 5.67 x 3.54 x 3.11 pulgadas
- Peso: 1.04 libras
- Fabricante: Masajeador TechCare
- ASIN: B0CGCFW8QB
Garantía y soporte
The TechCare Massager Plus 24 comes with a limited lifetime warranty. To activate your warranty, please visit www.techcaremassager.com/pluswarranty.
For any questions or concerns, you may contact TechCare Massager directly:
- Correo electrónico: wecare@techcaremassager.com
- Número gratuito: (888) 489-6116
Las declaraciones sobre los suplementos dietéticos no han sido evaluadas por la FDA y no pretenden diagnosticar, tratar, curar o prevenir ninguna enfermedad o condición de salud.