1. Introducción
The FSP Hydro G PRO 1000W Power Supply is an 80 Plus Gold certified, fully modular unit designed for high-performance computing systems. It complies with ATX 3.1 and PCIe 5.1 standards, featuring a native 12V-2x6 connector for next-generation hardware. Its compact design and advanced features ensure stable power delivery, high efficiency, and quiet operation.
Un de arriba hacia abajo view of the FSP Hydro G PRO 1000W Power Supply, highlighting its fan grille and compact design.
An illustration emphasizing the power supply's adherence to ATX 3.1 and PCIe 12V-2x6 standards, crucial for next-generation hardware.
2. Información de seguridad
Please read and understand all safety instructions before installing or operating this power supply. Failure to do so may result in personal injury or damage to your equipment.
- No Abra la fuente de alimentación. Alto volumen.tagEstán presentes en el interior, incluso cuando la unidad está desconectada.
- No No introduzca ningún objeto en la rejilla del ventilador ni en las aberturas de ventilación.
- No expose the power supply to water, moisture, or extreme temperatures.
- Asegúrese de que la fuente de alimentación esté instalada en un área bien ventilada.
- Utilice únicamente los cables modulares incluidos con esta fuente de alimentación. El uso de cables incompatibles podría causar daños.
- Conecte la fuente de alimentación a una toma eléctrica con conexión a tierra.
- Before installation or maintenance, always disconnect the AC power cord from the wall outlet and the power supply.
3. Contenido del paquete
Verifique que todos los artículos estén presentes en su paquete:
- FSP Hydro G PRO 1000W Power Supply Unit
- Modular Cable Set (Motherboard, CPU, PCIe, SATA, Peripheral)
- Cable de alimentación de CA
- Tornillos de montaje
- Manual de usuario
A comprehensive diagram displaying all modular cables provided with the power supply, detailing their lengths and connector configurations for Motherboard, CPU, PCIe, SATA, and Molex connections.
4. Configuración e instalación
Follow these steps to install your FSP Hydro G PRO 1000W Power Supply:
- Prepare su sistema: Asegúrese de que su computadora esté apagada y desenchufada del tomacorriente. Abra la carcasa para acceder al área de montaje de la fuente de alimentación.
- Retire la fuente de alimentación antigua (si corresponde): Desconecte todos los cables de su fuente de alimentación anterior y retírela de la carcasa.
- Monte la nueva fuente de alimentación: Carefully place the FSP Hydro G PRO 1000W Power Supply into the designated bay in your computer case. Secure it with the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards if your case has a bottom vent, or upwards if not).
- Conectar cables modulares: Identify the necessary cables for your components. This power supply is fully modular, allowing you to connect only the cables you need. Refer to the connection panel diagram below.
- Placa madre: Connect the 24-pin ATX cable to the 'MOTHERBOARD' port on the PSU and to your motherboard.
- UPC: Connect the 4+4-pin or 8-pin CPU power cable(s) to the 'CPU' port(s) on the PSU and to your motherboard.
- PCIe (Graphics Cards): Connect the 6+2-pin PCIe cables or the native 12V-2x6 cable to the 'PCIe' port(s) on the PSU and to your graphics card(s). The 12V-2x6 connector is designed for high-power graphics cards.
- Peripherals (SATA/Molex): Connect SATA power cables for SSDs/HDDs and Molex cables for other peripherals to the 'PERIPHERAL' ports on the PSU.
- Sistema de organización de cables: Coloque los cables de forma ordenada para mejorar el flujo de aire y la estética dentro de su carcasa.
- Conexión final: Once all internal connections are made, close your computer case. Connect the AC power cord to the power supply's inlet and then to a grounded wall outlet.
Detallado view of the power supply's modular connection panel, indicating dedicated ports for motherboard, CPU, PCIe, and peripheral cables, including the 12V-2x6 connector.
5. Instrucciones de funcionamiento
After installation, follow these steps to operate your power supply:
- Encendido: Ensure the main power switch on the rear of the power supply is in the 'ON' (I) position. Then, power on your computer using its case power button.
- Modo ecologico: The FSP Hydro G PRO features an Eco switch. When the Eco switch is engaged (ON), the power supply fan will remain off under loads below 30% of the PSU's rated power, providing silent operation. The fan will automatically activate when the load exceeds 30% or when temperatures rise. If the Eco switch is disengaged (OFF), the fan will operate continuously.
The rear panel of the power supply, featuring the AC power inlet, the main power ON/OFF switch, and the Eco mode toggle switch for silent operation at low loads.
6. Mantenimiento
Un mantenimiento adecuado garantiza la longevidad y el rendimiento óptimo de su fuente de alimentación.
- Limpieza: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use a soft, dry cloth or compressed air. Ensure the power supply is unplugged before cleaning.
- Recubrimiento conformado: This power supply is equipped with an exclusive conformal coating, providing protection against dust, humidity, and other environmental factors. This feature enhances reliability and durability, especially in challenging conditions.
A visual representation of the conformal coating protecting the internal circuitry of the power supply, ensuring reliable operation in challenging environmental conditions.
7. Solución de problemas
Si tiene problemas con su fuente de alimentación, consulte los siguientes problemas y soluciones comunes:
| Problema | Posible causa | Solución |
|---|---|---|
| El sistema no se enciende. |
|
|
| El sistema se enciende pero se apaga inmediatamente. |
|
|
| Fan is not spinning (Eco Mode). |
|
|
If the problem persists after attempting these solutions, please contact FSP customer support.
8. Especificaciones
| Característica | Detalle |
|---|---|
| Nombre del modelo | HG2 |
| Marca | FSP |
| Dispositivos compatibles | COMPUTADORA |
| Tipo de conector | ATX |
| Salida Wattage | 1000 vatios |
| Factor de forma | ATX |
| Método de enfriamiento | Air (with Eco Mode) |
| Dimensiones del artículo (largo x ancho x alto) | 6 x 6 x 3.5 pulgadas (150 mm x 150 mm x 86 mm) |
| Peso del artículo | 3.87 kilogramos |
| Diseño de fuente de alimentación | Modular completo |
| Calificación actual | 10 Amps |
| Cantidad de ventiladores | 1 |
| Volumen de entrada máximotage | 132 voltios (CA) |
| Vol. Mínimo de entradatage | 90 voltios (CA) |
| Clasificación de temperatura superior | 50 grados centígrados |
| System Bus Connector Type | 12 Pin or 16 Pin (12V-2x6) |
| Fabricante | FSP Group INC |
| Código Postal | 845685014177 |
| Número de pieza del fabricante | PPA10A2423 |
| Número de modelo | HG2-1000-G5T |
9. Garantía y soporte
This FSP Hydro G PRO 1000W Power Supply comes with a Garantía del fabricante por 10 año. For warranty claims, technical support, or any inquiries regarding your product, please contact FSP customer service through their official websitio o la información de contacto proporcionada en el embalaje de su producto.
For additional resources and product information, visit the official FSP websitio: www.fsplifestyle.com