kielle Oudee Thermostatic Shower Set 20602010 - User Manual

1. Introducción

This manual provides detailed instructions for the installation, operation, and maintenance of your kielle Oudee Thermostatic Shower Set 20602010. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

2. Información de seguridad

• La instalación debe ser realizada por un profesional calificado de acuerdo con los códigos de plomería y construcción locales.
• Asegúrese de que el suministro de agua esté cerrado antes de comenzar cualquier trabajo de instalación o mantenimiento.
• Verifique que todas las conexiones sean seguras y estancas para evitar fugas.
• No utilice limpiadores abrasivos ni productos químicos agresivos sobre el acabado cromado, ya que esto puede dañar la superficie.
• The thermostatic mixer is designed to maintain a constant water temperature. Periodically check the temperature to ensure it is set to a safe level, especially for children or individuals with sensitive skin.

3. Contenido del paquete

Desempaque la caja con cuidado y asegúrese de que todos los componentes estén presentes y sin daños. Si alguna pieza falta o está dañada, contacte con su vendedor inmediatamente.

• Thermostatic Shower Mixer (Faucet)
• Overhead Shower Head (approx. 260 mm)
• Ducha de mano
• Shower Bar (Riser Rail)
• manguera de la ducha
• Herrajes de montaje

Figura 1: Complete kielle Oudee Thermostatic Shower Set, showing the overhead shower, hand shower, thermostatic mixer, and riser rail.

4. Especificaciones

Figura 2: Technical drawing illustrating the dimensions and components of the kielle Oudee shower set.

5. Configuración e instalación

This section outlines the general steps for installing the kielle Oudee Thermostatic Shower Set. Professional installation is highly recommended.

5.1 Comprobaciones previas a la instalación

1. Suministro de agua: Ensure hot and cold water supply lines are available at the installation point. The thermostatic mixer requires both.
2. Preparación de la pared: The installation surface must be clean, flat, and structurally sound to support the weight of the shower set.
3. Herramientas necesarias: Gather necessary tools such as a drill, level, measuring tape, wrench, screwdriver, and sealant.

5.2 pasos de instalación

1. Cierre el suministro de agua: Localice la válvula principal de cierre de agua y cierre el suministro de agua al baño.
2. Monte el mezclador termostático:
   • Mark the desired height for the mixer on the wall.
   • Install the eccentric connectors into the wall water outlets, ensuring they are level and at the correct distance for the mixer.
   • Attach the thermostatic mixer to the eccentric connectors, using sealing washers and tightening securely.
3. Install the Riser Rail:
   • Position the riser rail above the mixer and mark the drilling points for the wall brackets.
   • Perfore agujeros, inserte los tacos y fije los soportes a la pared.
   • Attach the riser rail to the brackets.
4. Attach the Overhead Shower Head:
   • Connect the overhead shower arm to the top of the riser rail.
   • Attach the 260mm overhead shower head to the shower arm. Ensure all connections are sealed.
5. Connect the Hand Shower and Hose:
   • Connect one end of the shower hose to the outlet on the thermostatic mixer.
   • Connect the other end of the hose to the hand shower.
   • Place the hand shower in its adjustable holder on the riser rail.
6. Prueba de fugas: Abra lentamente el suministro principal de agua y revise todas las conexiones para detectar fugas. Apriete las conexiones que presenten fugas.

Figura 3: Example of the kielle Oudee shower set installed in a shower enclosure.

6. Instrucciones de funcionamiento

The kielle Oudee Thermostatic Shower Set is designed for ease of use and precise temperature control.

6.1 Control de temperatura

• The thermostatic mixer features a single handle for temperature adjustment.
• Gire la manija hacia la izquierda para obtener agua más caliente y hacia la derecha para obtener agua más fría.
• Most thermostatic mixers have a safety stop (often at 38°C / 100°F) to prevent accidental scalding. To exceed this temperature, you typically need to press a button or override the stop while turning the handle further.

6.2 Water Flow and Outlet Selection

• The mixer also controls the water flow and switches between the overhead shower and the hand shower.
• Typically, a diverter knob or button on the mixer allows you to select the desired water outlet.
• Ducha de techo: Provides a wide, rain-like spray for a full body shower experience.
• Ducha de mano: Offers flexibility for targeted rinsing. The hand shower features 3 distinct jet functions. These can usually be selected by rotating the spray plate or pressing a button on the hand shower head.
  • SilkFlow: A gentle, soft spray for a relaxing experience.
  • MistFlow: A fine, invigorating mist spray.
  • Standard Spray: A powerful, focused spray for effective rinsing.

Figura 4: The 260mm overhead shower head delivering a rain-like spray.

Figura 5: The hand shower demonstrating its spray capabilities.

Figura 6: The SilkFlow spray pattern from the hand shower, offering a gentle water flow.

Figura 7: The MistFlow spray pattern from the hand shower, providing a fine, invigorating mist.

Figura 8: The EasyClick button on the hand shower, used for switching between spray patterns.

7. Mantenimiento y limpieza

Regular cleaning and maintenance will ensure the longevity and optimal performance of your kielle Oudee shower set.

• Limpieza del acabado cromado:
  • Utilice un paño suave y un jabón suave o un limpiador no abrasivo diseñado específicamente para acabados cromados.
  • Wipe the surfaces gently and rinse thoroughly with clean water.
  • Seque con un paño suave para evitar manchas de agua.
  • No utilizar: Abrasive sponges, scouring pads, harsh detergents, acid-based cleaners, or solvents, as these can damage the chrome.
• Limpieza de cabezales de ducha:
  • Over time, mineral deposits (limescale) can build up in the nozzles of the shower heads.
  • Many modern shower heads feature flexible silicone nozzles that can be easily cleaned by gently rubbing them with your finger to dislodge deposits.
  • For more stubborn deposits, a solution of white vinegar and water can be used. Soak the shower head (if detachable) or spray the solution onto the nozzles, let it sit for a short period, then rinse thoroughly.
• Cartucho termostático: If you notice inconsistent temperature control, the thermostatic cartridge may need cleaning or replacement. This should be done by a qualified plumber.

8. Solución de problemas

This section addresses common issues you might encounter with your shower set.

9. Garantía y soporte

Information regarding specific warranty terms and availability of spare parts for the kielle Oudee Thermostatic Shower Set 20602010 is not provided in the product data. Please refer to your purchase documentation or contact your retailer for details on warranty coverage and spare parts availability.

For technical support or further assistance, please contact kielle customer service or your authorized dealer.