Información importante de seguridad
Read this instruction manual carefully before use to ensure safe operation and prevent damage to the product or injury.
This product is not a toy and should be operated with caution. Keep out of reach of small children. Always ensure proper battery installation and disposal. Do not expose the device to moisture or extreme temperatures.
Producto terminadoview
An image showing the Absima CR9T RC Pistol Transmitter, a black and grey device with a screen displaying numerical information and a large steering wheel on the right side. The handle is ergonomically designed for grip.
The Absima CR9T is a 2.4 GHz 9-channel RC pistol transmitter designed for precise control of remote-controlled vehicles. It features an ergonomic design, a clear display for settings, and intuitive controls for an enhanced user experience.
Configuración
- Instalación de la batería: Open the battery compartment cover located at the bottom of the transmitter. Insert the required batteries (not included) according to the polarity indicators. Close the cover securely.
- Vinculación del receptor: Refer to your receiver's manual for specific binding instructions. Generally, power on the receiver in binding mode, then power on the transmitter while holding the bind button (if applicable).
- Calibración inicial: After binding, perform a basic calibration of the steering and throttle channels to ensure proper response.
Instrucciones de funcionamiento
- Encendido/apagado: Press and hold the power button until the display illuminates/shuts off.
- Control de dirección: Use the steering wheel on the right side to control the vehicle's direction.
- Control del acelerador: Use the trigger for forward and reverse movement. Pull for forward, push for reverse.
- Asignación de canales: Utilize the various switches and knobs on the transmitter to control auxiliary channels (e.g., lights, winches) as configured on your receiver.
- Navegación en pantalla: Use the navigation buttons around the screen to access and adjust settings such as trim, EPA (End Point Adjustment), D/R (Dual Rate), and model memory.
Mantenimiento
- Limpieza: Use a soft, dry cloth to clean the transmitter. Do not use harsh chemicals or solvents.
- Almacenamiento: Guarde el transmisor en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas. Retire las pilas si lo va a guardar durante un periodo prolongado.
- Cuidado de la batería: Always use fresh batteries of the recommended type. Do not mix old and new batteries or different battery types.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El transmisor no se enciende | Baterías agotadas o mal instaladas | Reemplace las baterías; verifique la polaridad |
| No hay respuesta de control del vehículo | Not bound to receiver; receiver not powered; out of range | Re-bind transmitter and receiver; check receiver power; move closer to vehicle |
| Control errático | Interference; low battery on transmitter/receiver | Move to a different location; replace batteries |
Presupuesto
| Característica | Detalle |
|---|---|
| Dimensiones del producto | 14 x 10 x 18.5 cm |
| Peso | 320 gramos |
| Número de modelo del artículo | 2000012 |
| Número de artículos | 1 |
| ¿Se requieren pilas? | No (for product, but required for operation) |
| ¿Baterias incluidas? | No |
| ASIN | B0CP34F5K2 |
| Primera fecha disponible | 24 de abril de 2024 |
Garantía y soporte
We understand that it can be frustrating if a product does not work properly or becomes defective. Fortunately, we provide a warranty for a period of at least 2 years after purchase.
For technical support, warranty claims, or further assistance, please refer to the contact information provided with your purchase or visit the official Absima webSitio. Tenga a mano el número de modelo (2000012) y el comprobante de compra al contactar con el servicio de asistencia.