1. Introducción
The Sensative Strips Drip Z-Wave 800 is an ultra-thin water leak and temperature sensor designed for smart home environments. It utilizes Z-Wave 800 technology to detect water leaks and monitor ambient temperatures, providing timely notifications to your Z-Wave controller. Its slim design allows for discreet placement in hard-to-reach areas, offering comprehensive monitoring for potential water damage or freezing conditions.
2. Información de seguridad
- Do not attempt to open or modify the sensor. Internal components are not user-serviceable.
- Keep the sensor away from direct heat sources or open flames.
- Ensure the sensor is installed in a location where it will not be physically damaged or submerged in water beyond its intended detection area.
- Dispose of the product and its battery according to local regulations. Do not incinerate.
- The provided magnet is for setup and reset purposes only. Keep it away from children.
3. Contenido del paquete
Verifique que su paquete contenga los siguientes elementos:
- Sensative Strips Drip Sensor
- Magnet (for setup)
- Guía de inicio rápido (este manual)
Image: The Sensative Strips Drip sensor shown in its retail packaging, which includes the sensor and a small magnet.
4. Producto terminadoview
The Sensative Strips Drip sensor is designed to be discreet and highly functional. It features an ultra-thin profile, allowing it to be placed in tight spaces where traditional sensors cannot fit. The sensor detects water presence across its length and reports ambient temperature.
Características principales:
- Detección de fugas de agua: Senses water on most hard surfaces in 1-100% increments.
- Monitoreo de temperatura: Reports ambient room temperature.
- Z-Wave 800 Technology: Extended wireless range and enhanced security (S2 and Secure Vault).
- Batería de larga duración: Up to 10 years with the built-in LiMnO2 battery.
- Instalación universal: Adecuado para aplicaciones en interiores y exteriores.
5. Configuración
To set up your Sensative Strips Drip sensor, you will need a compatible Z-Wave controller or hub (sold separately). The sensor uses a magnet for activation and pairing.
5.1. Adding the Sensor to Your Z-Wave Network (Inclusion)
- Prepare your Z-Wave Controller: Put your Z-Wave controller into inclusion (pairing) mode. Refer to your controller's manual for specific instructions.
- Activar el sensor: Hold the provided magnet against the marked area on the sensor (usually indicated by a small indentation or symbol) for approximately 3 seconds, then remove it. The sensor's LED (if visible) may blink to indicate activation.
- Confirmar inclusión: Your Z-Wave controller should detect and add the sensor. If successful, the controller will confirm the inclusion. The sensor may appear as multiple devices (e.g., leak sensor, temperature sensor, brightness sensor) depending on your controller's capabilities.
- Smart Start (if supported): If your Z-Wave controller supports Smart Start, you can scan the QR code on the sensor or its packaging to automatically add it to your network.
Nota: The timing of holding and removing the magnet is crucial. If inclusion fails, repeat the process. Some Z-Wave hubs may require several attempts due to timing sensitivities.
5.2. Recomendaciones de colocación
The ultra-thin design allows for flexible placement. Consider areas prone to leaks or where temperature monitoring is critical.
- Debajo de los fregaderos (cocina, baño)
- Detrás de los baños
- Cerca de calentadores de agua
- Debajo de lavadoras o lavavajillas
- En sótanos o cuartos de servicio
- Near pipes that may freeze
Image: The thin Sensative Strips Drip sensor positioned on the floor directly in front of a washing machine, illustrating discreet placement for leak detection.
Image: The Sensative Strips Drip sensor lying on the cabinet floor under a kitchen sink, near plumbing, demonstrating its use in a common leak-prone area.
6. Funcionamiento del sensor
Once successfully included in your Z-Wave network, the Strips Drip sensor will automatically begin monitoring for water leaks and reporting temperature data.
6.1. Water Leak Detection
When water comes into contact with the sensor's detection strip, it will trigger a leak alarm. This alarm is sent to your Z-Wave controller, which can then execute predefined actions (e.g., send notifications, activate a siren, shut off a water valve if integrated).
Nota: The sensor's felt strip requires a few seconds to absorb water before triggering. This is normal operation.
6.2. Monitoreo de temperatura
The sensor continuously monitors the ambient temperature in its vicinity and reports this data to your Z-Wave controller at regular intervals (default wake-up interval is 24 hours, but can be configured). You can use this information to monitor for extreme temperatures that could indicate freezing pipes or other issues.
Image: A smartphone screen displaying a smart home application interface, showing a "Water Leak Detected" alert and a temperature reading of 21°C, with the Sensative Strips Drip sensor visible under a sink in the background.
7. Mantenimiento
7.1. Duración de la batería
The Sensative Strips Drip sensor is equipped with a built-in LiMnO2 battery designed to last up to 10 years under normal operating conditions. The battery is not replaceable by the user. When the battery is low, the sensor will report its status to your Z-Wave controller.
7.2. Limpieza
If the sensor becomes dirty, gently wipe it with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the sensor is dry before placing it back in its monitoring location.
8. Solución de problemas
If you encounter issues with your Sensative Strips Drip sensor, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| Sensor not pairing with Z-Wave controller. | Incorrect timing during inclusion, sensor too far from controller, controller not in inclusion mode. |
|
| No leak alerts received. | Sensor not properly included, communication issue, water not reaching detection strip, controller configuration. |
|
| Temperature readings are inaccurate or not updating. | Sensor placed in an area with fluctuating temperatures, long wake-up interval, communication issue. |
|
| Sensor battery appears to drain quickly. | Frequent reporting, poor network signal requiring more power, extreme temperatures. |
|
9. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | 11040321 |
| Versión Z-Wave | 800 Series (Z-Wave Plus v3) |
| Frecuencia | 915 MHz |
| Seguridad Z-Wave | S2 and Secure Vault |
| Fuente de alimentación | Built-in LiMnO2 battery |
| Duración de la batería | Hasta 10 años |
| Condiciones de funcionamiento | -20 a 60 °C (-4 a 140 °F) |
| Precisión de temperatura | ± 2 °C between -20 to 0°C (-4 to 32°F) ± 1 °C between 0 to 30°C (32 to 86°F) ± 2 °C between 30 to 60°C (86 to 140°F) |
| Alcance inalámbrico (línea de visión) | Hasta 390 pies (120 metros) |
| Wireless Range (Z-Wave Network) | Hasta 1640 pies (500 metros) |
| Wireless Range (Z-Wave LR) | Hasta 2620 pies (800 metros) |
| Dimensiones (Sensor) | 195 H x 15 W x 3 D mm (7.68 H x 0.59 W x 0.11 D in) |
| Wake Up Intervals | 30 minutes to 24 hours (default 24H) |
10. Garantía y soporte
For warranty information and technical support, please refer to the official Sensative website or contact their customer service directly. Keep your purchase receipt and product model number (11040321) handy for any inquiries.
Fabricante: Sensativo
Websitio: www.sensative.com