1. Información de seguridad
Please read these instructions carefully before installation and retain them for future reference. Improper installation or use can lead to electric shock, fire, or other hazards.
- Asegúrese de que la fuente de alimentación esté desconectada antes de realizar la instalación, el mantenimiento o la limpieza.
- La instalación debe ser realizada por un electricista calificado o una persona con conocimientos suficientes de sistemas eléctricos.
- Este producto está diseñado solo para uso en interiores. No lo exponga a la humedad ni a temperaturas extremas.
- Do not attempt to modify the light fixture. Any modifications may void the warranty and create safety hazards.
- Manipule los componentes acrílicos con cuidado para evitar dañarlos.
2. Contenido del paquete
Verifique que todos los componentes estén presentes y sin daños antes de continuar con la instalación.
- LED Ceiling Light Fixture (1)
- Mando a distancia (1)
- Herrajes de montaje (tornillos, anclajes de pared, conectores de cables)
- Manual de instrucciones (este documento)
Image: The SEABLE Modern LED Ceiling Light fixture, featuring a black base with seven square and rectangular acrylic rings that illuminate.
3. Producto terminadoview
The SEABLE Modern LED Ceiling Light features a contemporary design with integrated LED technology, offering dimmable brightness and adjustable color temperature. It is controlled via an included remote or a standard wall switch.
Características principales:
- Diseño moderno: Matte black metal base with unique acrylic square rings.
- Regulable: Brillo ajustable del 5% al 100%.
- Temperatura de color ajustable: 3000K (Warm White), 4000K (Neutral White), 6500K (Cool White).
- Mando a distancia: Full control over brightness, color temperature, and night light mode.
- Eficiencia energética: Built-in LED light sources with a lifespan exceeding 50,000 hours.
- Alto CRI: Color Rendering Index (CRI) 90+ for accurate color representation.
Imagen: Detallada view of the light's construction, highlighting the acrylic lampshade, high-quality LED strip, and stable chassis.
4. Especificaciones
| Característica | Especificación |
|---|---|
| Número de modelo | SEABLE-MLC-001 |
| Dimensiones | 40.2" de largo x 28.5" de ancho x 5.1" de alto |
| Quétage | 130 W |
| Brillo | 10400 lúmenes |
| Volumentage | 110-220V (compatible) |
| Temperatura de color | 3000K-6500K (ajustable) |
| Rango regulable | 5%-100% |
| CRI | 90+ |
| Material | Aluminio, Acrílico |
| Método de control | Control remoto, interruptor de pared |
| Tipo de instalación | Montaje semiempotrado |
| Peso | 5 libras |
Image: Product dimensions (40.2"L x 28.5"W x 5.1"H) and key specifications including voltage, quétage, CRI, dimmable range, and CCT.
5. Instrucciones de instalación
Before beginning installation, ensure the power is turned off at the circuit breaker. It is recommended to have two people for installation due to the size of the fixture.
- Prepare el accesorio: Tighten the screw tubes and use the nuts to fix the lamp body onto the chassis.
- Install Infrared Receiver: Put the infrared receiver into the small hole in the middle of the base.
- Organizar cables: Place the driver diagonally to expose the four small holes and organize the cords neatly.
- Placa de techo de montaje: Install the ceiling plate to the ceiling using appropriate screws and anchors.
- Conectar el cableado: Connect the household electrical wires to the fixture's wires (Live to Live, Neutral to Neutral, Ground to Ground) using the provided wire connectors. Ensure connections are secure.
- Fijar el accesorio al techo: Align the four holes in the chassis with the screws on the ceiling tray and tighten the four nuts.
- Anexo final: Snap the base onto the metal hanging plate and rotate the nut to fix it securely.
Image: Visual guide showing 8 steps for installing the ceiling light, from assembling the lamp body to connecting wires and mounting the fixture.
6. Instrucciones de funcionamiento
The SEABLE LED Ceiling Light can be operated using the included remote control or a standard wall switch.
Funciones del control remoto:
El control remoto proporciona un control completo sobre las funciones de la luz.
- Encendido/apagado: Enciende o apaga la luz.
- Brillo +/-: Ajusta el brillo de la luz del 5% al 100%.
- Temperatura de color +/-: Cycles through color temperatures (3000K, 4000K, 6500K).
- Temperaturas de color preestablecidas: Dedicated buttons for 3000K and 6500K.
- Modo de luz nocturna: Activates a soft, non-glaring night light setting.
- Auxiliary Light Switch: Controls additional lighting features if available.
- 50%/100% Brightness Switching: Quick access to common brightness levels.
Emparejamiento del control remoto:
After connecting the wires and powering on the light, press and hold the 'Setup' button on the remote control until the light starts to flash or changes color. This indicates successful pairing.
Wall Switch Operation:
A standard wall switch can be used to turn the light on/off and cycle through the three main color temperatures (3000K, 4000K, 6500K) by toggling the switch quickly.
Image: An infographic detailing each button on the remote control and its corresponding function, including power, brightness, color temperature, and night light mode.
Image: The ceiling light displaying its dimming capabilities from 10% to 100% and various color temperatures: Warm Light (3000K), Natural Light (4000K), and White Light (6500K).
7. Mantenimiento
El mantenimiento regular garantiza la longevidad y el rendimiento óptimo de su lámpara de techo.
- Limpieza: Before cleaning, ensure the power is off. Use a soft, dry cloth to wipe the fixture. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by drying with a clean cloth. Avoid abrasive cleaners or solvents.
- Inspección: Revise periódicamente si hay conexiones sueltas o componentes dañados. Si encuentra algún problema, consulte a un electricista cualificado.
- LED: The integrated LED light sources are designed for long life and are not user-replaceable.
8. Solución de problemas
If you encounter issues with your SEABLE LED Ceiling Light, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | Sin fuente de alimentación; cableado suelto; batería del control remoto agotada. | Verifique el disyuntor; verifique que todas las conexiones de cables estén seguras; reemplace las baterías del control remoto. |
| El control remoto no funciona. | Remote not paired; Batteries dead; Obstruction between remote and light. | Re-pair the remote (see Section 6); Replace batteries; Ensure clear line of sight. |
| La luz parpadea o se atenúa inesperadamente. | Unstable power supply; Loose connection; Incompatible dimmer switch (if applicable). | Consult an electrician to check power supply; Tighten connections; This fixture is not compatible with external dimmer switches, only the remote control or wall switch for CCT changes. |
| No se puede ajustar la temperatura del color ni el brillo. | Remote control issue; Light in a fixed mode. | Ensure remote is paired and batteries are fresh; Try cycling power with the wall switch. |
9. Garantía y soporte
SEABLE products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided with your purchase or contact SEABLE customer support.
If you require further assistance or have questions not covered in this manual, please contact SEABLE customer service through your retailer or the official SEABLE websitio.
Thank you for choosing SEABLE.