Lexicon Dade Queen Platform Bed (Model 1492GY-1) Instruction Manual

1. Producto terminadoview

The Lexicon Dade Queen Platform Bed is designed to offer a modern and versatile sleeping solution. This platform bed features a gray velvet fabric upholstered headboard with vertical channel-tufting, complemented by a brushed gray finish on the engineered wood frame, footboard, and rails. Its platform construction eliminates the need for a box spring.

Image 1.1: The Lexicon Dade Queen Platform Bed in a contemporary bedroom setting, showcasing its gray velvet headboard and wood frame.

2. Información de seguridad

Please read and understand all instructions before beginning assembly. Failure to follow these instructions may result in injury or damage to the product. Keep all small parts and packaging materials away from children. Assembly should be performed by at least two adults. Do not use power tools for assembly unless specifically instructed, as overtightening fasteners can cause damage. Ensure all connections are secure before use. Do not exceed the recommended weight capacity for the bed frame.

3. Contenido del paquete

Verify that all components listed below are present before starting assembly. If any parts are missing or damaged, please contact customer support.

• Cabecero (1)
• Estribo (1)
• Rieles laterales (2)
• Support Slats (Multiple)
• Center Support Legs (Multiple)
• Hardware Pack (Bolts, Washers, Allen Wrench, etc.)

4. Instrucciones de montaje

Siga estos pasos cuidadosamente para un montaje correcto. Se recomienda montar la cama en la habitación donde se usará.

1. Desembalaje e identificación de las piezas: Retire con cuidado todos los componentes del embalaje. Colóquelos sobre una superficie suave y limpia para evitar rayones. Identifique cada pieza utilizando la lista de piezas proporcionada.
2. Fije los rieles laterales a la cabecera: Align the side rails with the pre-drilled holes on the headboard. Secure them using the appropriate bolts and washers from the hardware pack. Do not fully tighten bolts until all major components are connected.
3. Fije los rieles laterales al pie de cama: Connect the other end of the side rails to the footboard, aligning holes and securing with bolts and washers. Once all four corners are connected, gently tighten all bolts using the provided Allen wrench.


Imagen 4.1: Lateral view of the bed frame, illustrating the connection points between the side rails, headboard, and footboard.

4. Instalar las patas de soporte centrales: Attach the center support legs to the designated crossbeams or support points on the side rails. Ensure they are firmly attached and provide stable support.
5. Colocar listones de soporte: Lay the wooden support slats across the bed frame, ensuring they are evenly spaced and secured to the side rails using the provided fasteners (if applicable). The slats provide the necessary support for your mattress.


Imagen 4.2: En ángulo view of the bed frame with the wooden support slats properly installed, ready for a mattress.

6. Ajuste final: Double-check all bolts and fasteners to ensure they are fully tightened. Do not overtighten.

5. Uso

This platform bed is designed to be used without a box spring. Simply place your queen-sized mattress directly onto the support slats. Ensure the mattress is centered and evenly distributed on the frame. Avoid jumping on the bed or placing excessive localized weight on any single point of the frame or slats.

6. Mantenimiento

• Limpieza de tapicería de terciopelo: Para una limpieza general, aspire suavemente la tela de terciopelo con un accesorio para tapicería. En caso de derrames, seque inmediatamente con un paño limpio y seco. Para manchas difíciles, consulte a un limpiador de tapicería profesional. Evite los productos químicos agresivos.
• Limpieza del marco de madera: Limpie el marco de madera con un paño suave.amp cloth. Avoid abrasive cleaners or polishes that may damage the finish. Dry immediately with a clean cloth.
• Comprobación del hardware: Periodically check all bolts and fasteners to ensure they remain tight. Retighten as necessary to maintain stability and prevent squeaking.
• Evite la luz solar directa: Prolonged exposure to direct sunlight can cause fading of the velvet fabric and wood finish.

Image 6.1: Close-up detail of the gray velvet fabric and the brushed gray wood finish, illustrating the textures for cleaning reference.

7. Solución de problemas

• Ruidos chirriantes: If the bed squeaks, check all bolts and connections. Tighten any loose hardware. Ensure the center support legs are firmly on the floor and evenly supporting the frame.
• Marco inestable: If the bed feels wobbly, verify that all components are correctly assembled and all fasteners are securely tightened. Ensure the bed is on a level surface.
• Partes dañadas: Si alguna pieza se daña durante el montaje o el uso, suspenda su uso y comuníquese con atención al cliente para obtener piezas de repuesto.

8. Especificaciones

Image 8.1: Dimensional diagram of the Lexicon Dade Queen Platform Bed.

9. Garantía y soporte

For warranty information and customer support, please refer to the product description on the store page or contact Lexicon customer service directly. You can visit the official Lexicon store for more details: Lexicon Store.