Phanteks XT View Manual de instrucciones del chasis para juegos de torre media

1. Introducción

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Características principales:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Contenido del paquete

Verifique que todos los componentes estén presentes en el paquete:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Bridas (30x)
  • MB/SSD Screws (30x)
  • Tornillos de mariposa (4x)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Configuración e instalación

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View chasis.

3.1. Preparación del chasis

1. Deshacer: Retire con cuidado el chasis de su embalaje.
2. Quitar paneles: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Imagen 3.1: Interior view of the XT View chassis, ready for component installation.

3.2. Instalación de la placa base

1. Instalar separadores: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Coloque la placa base: Alinee cuidadosamente la placa base con los separadores y la apertura del protector de E/S.
3. Placa base segura: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Instalación de la fuente de alimentación (PSU)

1. Posición PSU: Slide the PSU into its designated compartment at the bottom rear of the chassis.
2. Fuente de alimentación segura: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Instalación de la unidad de almacenamiento

The chassis supports 3.5" HDDs and 2.5" SSDs.

• Disco duro de 3.5": Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• SSD de 2.5": Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Secure drives with the appropriate screws.

3.5. Instalación de la tarjeta de expansión (GPU)

1. Retire las cubiertas de las ranuras: Retire las cubiertas de las ranuras de expansión necesarias de la parte trasera del chasis.
2. Insertar tarjeta: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Tarjeta segura: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Imagen 3.2: Interior trasero view highlighting expansion slots and fan mounting points.

3.6. Instalación del ventilador y del radiador

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Superior: hasta 360 mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Gestión de cables

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

Imagen 3.3: Trasera view illustrating cable management space.

3.8. Conexiones de E/S frontales

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• Cabecera USB 3.0
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Instrucciones de funcionamiento

4.1. Encendido y apagado

Presione el Botón de encendido located on the top front panel to turn the system on or off.

4.2. Conectividad del panel frontal

The front I/O panel provides convenient access to:

• 1 puerto USB 3.0
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. Mantenimiento

5.1. Limpieza de los filtros de polvo

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Eliminar filtros: Gently slide out or unclip the dust filters.
2. Limpio: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. Reinstalar: Place the clean, dry filters back into their positions.

5.2. Limpieza General

For external surfaces, use a soft, damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. Solución de problemas

Esta sección aborda problemas comunes que podrías encontrar.

6.1. El sistema no se enciende

• Conexiones de energía: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Conexiones de la placa base: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Encabezado del panel frontal: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Sincronización de placa base: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Funcionalidad del botón: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Conexiones: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• Obstrucciones: Compruebe si hay cables u objetos que obstruyan las aspas del ventilador.
• Polvo: Limpie cualquier acumulación de polvo en las aspas del ventilador.

7. Especificaciones

8. Soporte y garantía

For additional information, technical support, or warranty inquiries, please visit the official Phanteks websitio:

www.phanteks.com

Refer to the Phanteks webSitio para conocer los términos y condiciones de garantía más actualizados aplicables a su región.