Introducción
This manual provides instructions for the assembly, operation, and maintenance of your Bayer Design City Max Doll Pram. Please read these instructions carefully before use to ensure safe and correct handling of the product. This doll pram is designed for dolls up to 46 cm in length and is suitable for children aged 3 years and up.
Información de seguridad
¡Advertencia! Not suitable for children under 3 years. Contains small parts. Choking hazard!
- Supervise siempre a los niños durante el juego.
- Asegúrese de que todas las piezas estén ensambladas de forma segura antes de usarlas.
- Mantenga los materiales de embalaje fuera del alcance de los niños para evitar asfixia.
- Regularly check the product for any damage or loose parts. Discontinue use if damage is found.
Contenido del paquete
Al desembalar, verifique que estén presentes todos los componentes:
- Doll Pram Frame with Wheels
- Pram Body / Seat Unit
- Manillar ajustable
- Integrated Basket
- Matching Doll Bag
Image 1: The Bayer Design City Max Doll Pram in pram configuration, shown with its matching accessory bag.
Instrucciones de instalación
- Desempaquetar componentes: Retire con cuidado todas las piezas del embalaje.
- Marco desplegable: Gently unfold the pram frame until it locks into place. Ensure all locking mechanisms are engaged.
- Adjuntar ruedas: Securely attach the wheels to the designated axles on the pram frame. Ensure they click into place. The front wheels are designed to swivel for easy maneuverability.
- Install Pram Body/Seat Unit: Place the pram body onto the frame. It should securely clip into position.
- Ajuste del manillar: The handlebar height can be adjusted to suit the child's stature. Locate the adjustment buttons on either side of the handlebar and press them to extend or retract the handle. Release the buttons to lock the handle at the desired height.
- Attach Accessory Bag: The included bag can be hung on the handlebar or placed in the integrated basket.
Imagen 2: Lateral view of the doll pram, highlighting the frame and wheel assembly.
Instrucciones de funcionamiento
Converting from Pram to Buggy
The pram body can be easily converted into a seat unit (buggy configuration). Locate the release mechanisms on the sides of the pram body. Press these buttons and adjust the unit's position until it forms a seat. Ensure it locks securely in the new position.
Image 3: The doll pram configured as a buggy, showing the seat unit.
Adjusting the Hood
The hood can be adjusted to protect the doll from sun or wind. Gently push or pull the hood to the desired position. It will hold its position once released.
Using the Integrated Basket and Bag
The integrated basket located under the pram body provides storage for small items. The included accessory bag offers additional storage and can be carried separately or attached to the pram.
Image 4: The accessory bag, designed to match the doll pram.
Cuidado y mantenimiento
- Limpieza: Limpie la tela y el marco con un paño.amp Paño y jabón suave. No utilice productos químicos agresivos ni limpiadores abrasivos.
- Almacenamiento: Store the doll pram in a clean, dry place away from direct sunlight when not in use.
- Inspección: Periodically check all screws, bolts, and locking mechanisms to ensure they are tight and functioning correctly.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Pram does not fold/unfold smoothly. | Los mecanismos de bloqueo están atascados o no están completamente enganchados/desenganchados. | Ensure all release buttons are pressed or that the frame is aligned correctly. Do not force the mechanism. |
| Las ruedas están rígidas o no giran. | Dirt or debris in the wheel mechanism; wheels not properly attached. | Clean around the wheel axles. Re-check that wheels are securely attached and click into place. |
| Pram body/seat unit is loose. | Not securely locked into the frame. | Ensure the unit is fully engaged with the frame's locking points. Listen for a click. |
Especificaciones del producto
- Número de modelo: 17533AA
- Marca: diseño bayer
- Dimensiones del producto: 27.17 x 29.13 x 16.14 pulgadas (largo x alto x ancho)
- Peso del artículo: 8.54 libras
- Edad recomendada: 3 años y más
- Maximum Doll Size: 46 centímetros
- Características: Height-adjustable handle, front swivel castors, convertible pram to buggy, integrated basket, matching bag.
Garantía y soporte
For information regarding warranty coverage or product support, please refer to the purchase documentation or contact Bayer Design customer service directly. Contact details can typically be found on the manufacturer's official websitio o en el embalaje del producto.