1. Información importante de seguridad
Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.
- ADVERTENCIA: Riesgo de descarga eléctrica. Desconecte la alimentación desde el fusible o disyuntor antes de realizar cualquier instalación o mantenimiento.
- ADVERTENCIA: Riesgo de incendio. Mantenga los materiales combustibles alejados del lamp.
- This fixture is intended for indoor use only. Do not use in wet locations or where directly exposed to water.
- Asegúrese de que el volumen de suministrotage is compatible with the fixture's requirements (120V-277V).
- All wiring connections must be made in accordance with local and national electrical codes. If you are unsure about wiring, consult a qualified electrician.
- No intente modificar ni desmontar el dispositivo. No contiene piezas que el usuario pueda reparar.
2. ¿Qué hay en la caja?
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- LED Shop Light Fixture(s)
- Herrajes de montaje (tornillos, anclajes)
- Linking Cables (1.5" and 8" for daisy-chaining)
- Tuercas de alambre
3. Especificaciones
| Característica | Especificación |
|---|---|
| Marca | Iluminación Sunco |
| Nombre del modelo | LED Shop Light, 4ft Wraparound, Prismatic Lens, 8.5 Inch |
| Dimensiones (L x An x Al) | 48" de largo x 8.58" de ancho x 2.56" de alto |
| Quétage | 60 vatios |
| Brillo | 7200 lúmenes |
| Eficiencia | 120 LM / W |
| Temperatura de color (CCT) | Seleccionable: 4000K, 5000K, 6000K |
| Volumentage | 120 V-277 V |
| Regulable | No (no regulable) |
| Material | Acero aleado, policarbonato |
| Tipo de montaje | Ceiling Mount (Flush Mount) |
| Características especiales | Linkable, Wide Beam Angle (110°) |
| Certificaciones | ETL, FCC, RoHS |
| Vida media | 50,000 horas |
The fixture features a durable build with an impact-resistant prismatic lens for wide and consistent light dispersion.
This image illustrates key features including impact resistance, the prismatic lens design, non-dimmable functionality, and the wide voltage compatibility of 120-277V.
4. Configuración e instalación
Siga estos pasos para una instalación correcta. Asegúrese de que la alimentación esté desconectada antes de comenzar.
4.1. Prepárese para la instalación
- Apague la energía: Locate the circuit breaker controlling the installation area and turn off the power.
- Quitar el difusor: Gently remove the prismatic diffuser from the lamp base to access the internal components.
- Seleccionar temperatura de color (CCT): Before mounting, locate the CCT switch inside the fixture. Select your desired color temperature (4000K, 5000K, or 6000K). This setting cannot be changed easily after installation.
This image shows the internal CCT switch, allowing selection between 4000K, 5000K, and 6000K before installation.
4.2. Montaje del dispositivo
The fixture is designed for flush mounting to a ceiling or surface. It includes keyhole slots for easy installation.
- Marcar los puntos de montaje: Hold the fixture in the desired mounting location and mark the positions for the mounting screws. Ensure these align with a junction box or suitable support structure.
- Instalar el hardware de montaje: Drill pilot holes if necessary and install the provided mounting screws, leaving a small gap for the fixture to slide onto.
- Preparar el cableado: If connecting to a junction box, knock out the appropriate punch hole on the fixture's housing.
This diagram illustrates the three main steps for installation: securing the housing, connecting electrical wires, and attaching the light fixture.
4.3. Conexión eléctrica
- Conectar cables: Using the provided wire nuts, connect the fixture's wires to the supply wires: Live (black) to Live, Neutral (white) to Neutral, and Ground (yellow/green) to Ground. Ensure all connections are secure.
- Cables Tuck: Carefully tuck all wires and wire nuts into the junction box or fixture housing.
4.4. Linking Multiple Fixtures (Daisy Chain)
This fixture supports daisy-chaining to extend lighting coverage. Use the provided linking cables.
- Connect Linking Cable: Insert one end of a linking cable into the designated port on the first fixture and the other end into the port on the next fixture.
- Conexiones seguras: Ensure linking cables are securely connected and properly routed.
This image demonstrates how to daisy-chain multiple fixtures using the linking cables and highlights the knockout punch hole for electrical connections.
4.5. Pasos finales
- Reattach Diffuser: Align one end of the diffuser with the aluminum base and push it into place until it snaps securely.
- Restaurar energía: Turn the circuit breaker back on to restore power to the fixture.
5. Instrucciones de funcionamiento
The Sunco Lighting LED Shop Light is designed for straightforward operation once installed.
5.1. Selección de la temperatura de color (CCT)
This fixture features a selectable color temperature (CCT) switch, allowing you to choose between 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White) to suit your preference or application. The CCT switch is located inside the fixture and must be set during installation before the diffuser is reattached.
- 4000K: Provides a neutral white light, suitable for offices or general workspaces.
- 5000K: Offers a bright, crisp daylight-like illumination, ideal for tasks requiring high visibility.
- 6000K: Delivers a very bright, cool white light, often preferred for industrial settings or areas needing maximum brightness.
This image displays the internal components and wiring, emphasizing the high efficiency of the LED fixture operating within a 120-277V range.
5.2. Encendido y apagado
The fixture is non-dimmable and operates via a standard wall switch connected to its power supply. Simply toggle the wall switch to turn the light on or off.
6. Mantenimiento
The Sunco Lighting LED Shop Light requires minimal maintenance. Always ensure power is disconnected before performing any maintenance.
- Limpieza: Limpie el exterior del artefacto con un paño suave, seco o ligeramente húmedo.amp cloth. Do not use harsh chemicals or abrasive cleaners, as these can damage the finish or lens.
- Inspección: Inspeccione periódicamente la luminaria para detectar cualquier signo de daño, cableado suelto o desgaste. Si encuentra algún problema, desconecte la alimentación y consulte a un electricista calificado.
- Sin reemplazo de bombilla: This fixture uses integrated LEDs, meaning there are no bulbs to replace. The LEDs are designed for a long lifespan of 50,000 hours.
7. Solución de problemas
If you experience issues with your LED Shop Light, refer to the following common troubleshooting steps:
- La luz no enciende:
- Verifique el disyuntor para asegurarse de que haya energía.
- Verify all wire connections are secure and correct.
- Asegúrese de que el interruptor de pared esté en la posición ON.
- La luz parpadea:
- Confirm the fixture is not connected to a dimmer switch, as it is non-dimmable.
- Verifique si hay conexiones de cableado sueltas.
- Asegúrese de que el volumen de suministrotage es estable y está dentro del rango especificado.
- Temperatura de color incorrecta:
- The CCT switch must be set before installation. If the diffuser is already installed, carefully remove it to access and adjust the switch.
If these steps do not resolve the issue, contact Sunco Lighting customer support for assistance.
8. Garantía y soporte
Sunco Lighting respalda la calidad de sus productos.
- Garantía: This product is backed by a 3-Year Warranty. Please refer to the official Sunco Lighting website or your purchase documentation for full warranty details and terms.
- Atención al cliente: For technical assistance, troubleshooting, or warranty claims, please contact Sunco Lighting customer support.
