1. Introducción
The Lumens VS-KB21 is an advanced IP camera controller designed for professional video production environments. It provides comprehensive control over up to 255 IP-connected cameras, supporting various communication interfaces including RS-232, RS-422, and Ethernet. Key features include a 4-axis joystick for precise Pan/Tilt/Zoom control, a 3-inch LCD for RTSP preview, and user-assignable keys for quick access to functions. This manual provides detailed instructions for setting up, operating, and maintaining your VS-KB21 controller.
2. Producto terminadoview
Familiarize yourself with the components and controls of the VS-KB21 controller.
2.1 Controles del panel frontal
Figura 1: Frente view of the Lumens VS-KB21 IP Camera Controller, showing the joystick, LCD screen, and various control buttons and knobs.
- Palanca de mando: 4-axis control for Pan, Tilt, and Zoom.
- Pantalla LCD: 3-inch display for RTSP video preview y menú de navegación.
- Perillas: Dedicated controls for Iris, Shutter, Gain, White Balance, and Focus.
- Teclado: Numeric and function keys for camera selection, preset recall, and menu input.
- User-Assignable Keys (F1, F2): Botones de función personalizables.
- Zoom Seesaw Lever: For precise zoom control (Tele/Wide).
2.2 Conexiones del panel posterior
Figura 2: Posterior view of the Lumens VS-KB21 IP Camera Controller, highlighting the connectivity ports.
- Puerto RS-422: For serial communication with cameras.
- Puerto RS-232: For serial communication with cameras.
- Puerto de servicio: USB port for firmware updates and service.
- Puerto ETHERNET: RJ-45 connector for IP control and PoE (Power over Ethernet).
- DC EN 12V: Entrada de alimentación para el adaptador de CC incluido.
- Interruptor de alimentación: Interruptor de encendido y apagado de la unidad.
- LOCK Slot: Para cable de seguridad.
3. Configuración
Follow these steps to set up your VS-KB21 controller.
- Conexión de energía:
- Connect the provided DC 12V power adapter to the 'DC IN 12V' port on the rear panel and plug it into a power outlet.
- Alternatively, if using a PoE-enabled network switch, connect an Ethernet cable from the switch to the 'ETHERNET' port. The unit will power on via PoE.
- Network Connection (for IP Control):
- Connect an Ethernet cable from the 'ETHERNET' port on the controller to your network switch or router. Ensure the controller and IP cameras are on the same network segment.
- Serial Connection (for RS-232/RS-422 Control):
- For RS-232 control, connect a serial cable from the 'RS-232' port on the controller to the camera's RS-232 port.
- For RS-422 control, connect a serial cable from the 'RS-422' port on the controller to the camera's RS-422 port.
- Encendido inicial:
- Flip the 'POWER' switch to the ON position. The LCD screen will illuminate, and the controller will initialize.
- Configuración de la cámara:
- Access the controller's settings menu via the LCD to add and configure your IP or serial cameras. Refer to the on-screen prompts for IP address, port, and protocol settings (VISCA, VISCA Over IP).
4. Instrucciones de funcionamiento
This section details the operation of the VS-KB21 controller for managing your cameras.
4.1 Selección de cámara
- Press the 'CAM LIST' button to view a list of configured cameras.
- Use the numeric keypad (CAM 1-7) or the joystick to select the desired camera.
- Presione ‘ENTER’ para confirmar su selección.
4.2 Control de panorámica, inclinación y zoom (PTZ)
- Panorámica/inclinación: Move the 4-axis joystick left/right for pan and up/down for tilt.
- Zoom: Rotate the joystick head or use the 'TELE' (zoom in) and 'WIDE' (zoom out) buttons on the seesaw lever.
- Velocidad PTZ: Adjust the 'PTZ SPEED' knob to control the responsiveness of the joystick.
4.3 Control de enfoque
- Press the 'AUTO FOCUS' button for automatic focus adjustment.
- For manual focus, use the 'FOCUS' knob: rotate 'NEAR' to focus on closer objects, 'FAR' for distant objects.
4.4 Exposición y balance de blancos
- Modo de exposición: Press 'EXPOSURE MODE' to cycle through auto, manual, and shutter priority modes.
- Iris/Shutter/Gain: Use the dedicated knobs to adjust these parameters in manual exposure mode.
- Balance de blancos: Press 'WB MODE' to select white balance presets or 'ONE PUSH WB' for automatic one-push white balance.
4.5 preajustes
- Guardar un preajuste: Position the camera as desired, then press 'SAVE' followed by a numeric key (0-9) to store the preset.
- Recuperar un ajuste preestablecido: Press 'CALL' followed by the numeric key corresponding to the saved preset.
4.6 RTSP Preview
- The 3-inch LCD screen supports RTSP video preview from the selected IP camera. Ensure the camera's RTSP stream is correctly configured in the controller's settings.
- Press 'PVW' to toggle the preview encendido/apagado.
5. Mantenimiento
Proper maintenance ensures the longevity and optimal performance of your VS-KB21 controller.
- Limpieza: Utilice un paño suave y seco para limpiar el exterior del mando. Para manchas difíciles, utilice un paño ligeramente seco.amp Se puede utilizar un paño con detergente suave, asegurándose de que no entre líquido en el dispositivo.
- Almacenamiento: Guarde el controlador en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas cuando no esté en uso.
- Actualizaciones de firmware: Periodically check the Lumens official website for firmware updates. Updates can be installed via the 'SERVICE' USB port.
- Evite los líquidos: No exponga el controlador al agua ni a otros líquidos.
- Evite el impacto: Protect the device from physical shocks and drops, especially the joystick.
6. Solución de problemas
Consulte esta sección para obtener soluciones a problemas comunes.
| Problema | Posible causa | Solución |
|---|---|---|
| El controlador no se enciende. | No power supply; Power switch off; Faulty power adapter/PoE. | Ensure power adapter is connected and outlet is active. Check PoE connection. Verify power switch is ON. |
| Cannot control camera via IP. | Incorrect IP settings; Network issue; Camera not configured; Firewall blocking. | Verify IP address, subnet mask, and gateway settings. Ensure controller and camera are on the same network. Check camera configuration in controller. Disable firewalls temporarily for testing. |
| No RTSP preview en la pantalla LCD. | Incorrect RTSP stream URL; Network congestion; Camera not streaming. | Confirm the RTSP stream URL in the controller's settings matches the camera's output. Check network bandwidth. Ensure the camera is actively streaming. |
| Joystick control is unresponsive or erratic. | Loose cable connection; Joystick calibration needed; Physical damage. | Check all cable connections. Refer to the controller's menu for joystick calibration options. If issues persist, contact support. |
7. Especificaciones
Detailed technical specifications for the Lumens VS-KB21 IP Camera Controller.
| Característica | Descripción |
|---|---|
| Interfaz de comunicación | RS-232 / RS-422 / IP (Ethernet) |
| Mostrar | LCD de 3 pulgadas |
| Palanca de mando | 4-axis (Pan / Tilt / Zoom) |
| Control de velocidad | 1 perilla |
| Control de zoom | 1 Seesaw Lever |
| Control de ganancia | Ganancia R/B |
| Control de enfoque | Auto / Manual |
| Botones asignables | 2 (F1, F2) |
| Teclado | Retroiluminado |
| Stream Preview | RTP |
| Tasa de Baud | 2400 / 4800 / 9600 / 38400 / 115200 puntos básicos |
| Camera Address Range | 1~255 |
| Ajustes preestablecidos | 255 |
| Fuerza | 12 V CC/PoE. |
| Dimensiones (Ancho x Alto x Profundidad) | 11.89 x 5.63 x 4.41 pulgadas (30.2 x 14.3 x 11.2 cm) |
| Peso | 2.8 libras (1.27 kg) |
| Color | Negro |
| Nombre del modelo | VS-KB21 |
8. Garantía y soporte
For warranty information, technical support, or service inquiries, please visit the official Lumens webVisite el sitio web o contacte a su distribuidor autorizado. Conserve el recibo de compra como comprobante para reclamaciones de garantía.
Lúmenes Websitio: www.mylumens.com