POPETPOP C10PO2Q1B1VWL144H51MUKPZ
POPETPOP LED Aquarium Light Clip-on Fish Tank Lamp Manual de usuario
Model: C10PO2Q1B1VWL144H51MUKPZ
Introducción
Thank you for choosing the POPETPOP LED Aquarium Light. This manual provides essential information for the safe and effective use of your new aquarium lampLea atentamente estas instrucciones antes de la instalación y el funcionamiento, y consérvelas para futuras consultas.

Image: The POPETPOP LED Aquarium Light, featuring a flexible gooseneck, a circular LED head, an inline power switch, and a USB power cable with a clip for attachment.
Información de seguridad
- Ensure the power source is compatible with the device's USB input (3W).
- Do not immerse the light head or USB connector in water. This product is not submersible.
- Mantener fuera del alcance de los niños.
- Desconecte la alimentación antes de realizar cualquier mantenimiento o limpieza.
- No intente desmontar ni reparar la unidad usted mismo. Contacte con personal cualificado para obtener servicio técnico.
- Ensure the clip is securely attached to the aquarium wall to prevent accidental detachment.
Contenido del paquete
Verifique que todos los artículos estén presentes en el paquete:
- 1 x POPETPOP LED Aquarium Lamp

Imagen: Un detalle view of the light's components, showing the LED array, the USB plug, and the inline power switch.
Características del producto
- Construcción duradera: Made of plastic material, designed for wear resistance and safety in an aquatic environment.
- Cuello flexible: Allows for easy adjustment of light angle and position.
- Clip seguro: Designed for stable attachment to aquarium walls with a thickness between 2-5mm (0.08-0.2 inches).
- Luz LED colorida: Provides illumination that enhances fish colors and supports aquatic plant growth through comprehensive photosynthesis.
- Diseño compacto: Small and lightweight, minimizing space usage.

Imagen: Primer plano views highlighting the safety of the materials and the practical design of the inline switch and LED light panel.
Instrucciones de instalación
- Desempaquetar la luz: Carefully remove the LED aquarium light from its packaging.
- Identificar la ubicación de montaje: Choose a suitable location on the edge of your aquarium where the light can be securely clipped. Ensure the aquarium wall thickness is between 2-5mm.
- Coloque el clip: Align the light's clip with the aquarium wall and press down firmly to secure it in place. Ensure it is stable and does not wobble.
- Coloque la luz: Adjust the flexible neck to direct the light over your desired area of the aquarium.
- Conecte la electricidad: Plug the USB connector into a compatible USB power adapter (not included) or a USB port on another device.

Image: The LED aquarium light securely clipped to the edge of a fish tank, demonstrating proper installation and illumination.
Instrucciones de funcionamiento
- Encendido: Once the USB cable is connected to a power source, press the inline switch located on the cable to turn the light on.
- Ajustar posición: If needed, gently adjust the flexible neck to fine-tune the light's direction.
- Apagado: Press the inline switch again to turn the light off.
Mantenimiento
- Limpieza: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the light head and flexible neck. Do not use abrasive cleaners or immerse any part of the light in water.
- Inspección regular: Periodically check the USB cable for any signs of damage or wear. Ensure the clip remains securely attached to the aquarium.
- Almacenamiento: Si va a guardar la lámpara durante un periodo prolongado, asegúrese de que esté limpia y seca. Guárdela en un lugar fresco y seco, alejada de la luz solar directa.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | No power supply, loose USB connection, faulty switch. |
|
| La luz parpadea. | Fuente de alimentación inestable, conexión suelta. |
|
| Light falls off the aquarium. | Improper clip attachment, aquarium wall too thick/thin. |
|
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | C10PO2Q1B1VWL144H51MUKPZ |
| Marca | POPETPOP |
| Fuerza | 3W |
| Tipo de luz | Colorful LED Light |
| Longitud del cable | 1 metros (39.37 pulgadas) |
| Material | Plástico |
| Dimensiones del producto | 18.00 cm de largo x 4.00 cm de ancho x 2.00 cm de alto (7.09" de largo x 1.57" de ancho x 0.79" de alto) |
| Suitable Aquarium Thickness | 2-5 mm (0.08-0.2 pulgadas) |
| Peso del artículo | 1.76 onzas (0.11 libras) |

Image: A diagram illustrating the dimensions of the light, showing a length of 18cm (7.07in) and a head width of 4cm (1.57in).
Garantía y soporte
For warranty information or technical support, please refer to the retailer's policy or contact POPETPOP customer service through their official channels. Keep your purchase receipt as proof of purchase.
Para obtener más ayuda, puede visitar el POPETPOP Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.