1. Introducción
This manual provides detailed instructions for the setup, operation, and maintenance of your MAONO BA37 Heavy Duty Adjustable Metal Suspension Microphone Boom Arm. Please read this manual thoroughly before use to ensure proper installation and optimal performance.
Image 1.1: User operating the MAONO BA37 Microphone Boom Arm.
2. Información de seguridad
- Asegúrese de que el escritorio esté limpioamp esté bien fijado a una superficie estable antes de colocar el brazo articulado y el micrófono.
- Do not exceed the maximum weight recommendation of 5.5 pounds (2.5 kg) for attached equipment.
- Evite pillarse los dedos o los cables en las articulaciones del brazo durante el ajuste.
- Keep the boom arm away from heat sources and direct sunlight.
3. Contenido del paquete
Verifique que todos los artículos estén presentes en su paquete:
- Heavy-duty microphone scissor arm stand x1
- Upgraded table mounting clamp x1
- 3/8" to 5/8" screw adapter x1
- Correas de cable x2
4. Guía de configuración
4.1. Installing the Desk Clamp
- Choose a stable desktop surface with a thickness up to 2.36 inches (6.5 cm).
- Place the upgraded table mounting clamp en el borde de tu escritorio.
- Tighten the screw mechanism until the clamp está firmemente asegurado. El clamp features a 4200mm² surface area and a silicone pad to protect your desk from scratches.
- El CLamp also includes a convenient headset hook for storage.
Image 4.1: Desk Clamp Installation and Features.
4.2. Fijación del brazo de la pluma
- Insert the base of the microphone scissor arm stand into the hole on the top of the desk clamp.
- Ensure the arm is seated properly and tighten any locking mechanisms on the clamp para asegurar el brazo.
4.3. Conexión del micrófono
- If your microphone has a 3/8" thread, use the provided 3/8" to 5/8" screw adapter if your microphone requires a 5/8" thread.
- Screw your microphone or shock mount onto the threaded end of the boom arm.
- Ensure the microphone is securely fastened.
Video 4.2: Official MAONO video demonstrating the installation and secure positioning of the BA37 Microphone Boom Arm.
4.4. Gestión de cables
Use the included cable straps to neatly route your microphone cable along the boom arm, preventing tangles and maintaining a clean setup.
5. Instrucciones de funcionamiento
5.1. Ajuste del brazo de la pluma
The MAONO BA37 boom arm features 5 adjustable nodes, allowing for flexible positioning. It offers a horizontal reach of 27.6 inches (70 cm) and a vertical reach of 29.6 inches (75 cm). Adjust the arm to your desired height and angle for optimal microphone placement.
Image 5.1: Flexible Adjustment and Positioning.
5.2. Load Capacity and Stability
The boom arm is constructed from thicker metal, enhancing stability and boasting an impressive load capacity of 4.8 lbs (2.2 kg). Its internal springs ensure silent operation, crucial for professional recording environments.
Image 5.2: Enhanced Load-bearing Capacity.
5.3. Compatibilidad del micrófono
The MAONO BA37 is compatible with a wide range of microphones and shock mounts, including MAONO PD100X, PD200X, PM450, PD400, PM500, Fifine AM8, AmpliGame (A6V, A8), HyperX QuadCast, HyperX Solocast, Shure MV7, Shure SM58, Shure SM7B, AT2020, AT2035, and others.
Image 5.3: Compatibility List for MAONO BA37.
6. Mantenimiento
- Regularly check all screws and joints for tightness. Tighten if necessary to maintain stability.
- Clean the boom arm with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Ensure the silicone pad on the desk clamp is free from debris to maintain grip and protect your desk.
7. Solución de problemas
- El brazo no mantiene la posición: Ensure all adjustment knobs and the desk clamp are fully tightened. The arm is designed to hold up to 4.8 lbs (2.2 kg); verify your microphone's weight.
- Microphone wobbles: Check that the microphone or shock mount is securely screwed onto the arm's thread. Ensure the 3/8" to 5/8" adapter (if used) is also tight.
- Escritorio clamp corrimiento: Vuelva a apretar el cierre del escritorio.amp. Ensure the desktop surface is clean and dry for maximum grip. The silicone pad should be in direct contact with the desk.
8. Especificaciones
| Característica | Detalle |
|---|---|
| Marca | MAÑANO |
| Número de modelo | BA37 |
| Material | Acero aleado, metal |
| Peso del artículo | 3 libras (1.36 kg) |
| Recomendación de peso máximo | 5.5 libras (2.5 kg) |
| Altura máxima | 29.6 pulgadas (75 cm) |
| Alcance horizontal | 27.6 pulgadas (70 cm) |
| Tipo de base | Upgraded 4200mm² Surface Area Desk Clamp with Soft Pad |
| Desk Thickness Support | Up to 2.36 Inches (6.5 cm) |
| Mount Thread Size | 3/8" to 5/8" screw adapter |
| Componentes incluidos | Heavy-duty microphone scissor arm stand, Upgraded table mounting clamp, 3/8" to 5/8" screw adapter, Cable straps x2 |
9. Garantía y soporte
The MAONO BA37 Microphone Boom Arm comes with a 1 año de garantía from the date of purchase. For warranty claims, technical support, or any questions regarding your product, please contact MAONO customer service through their official webSitio web o al minorista donde compró el producto. Conserve su comprobante de compra para validar la garantía.
