1. Introducción
This manual provides detailed instructions for the operation and maintenance of your Funistree Portable Bluetooth Speaker with Phone Stand. Please read this manual thoroughly before using the product to ensure proper function and longevity.
2. Contenido del paquete
Verifique que todos los artículos enumerados a continuación estén incluidos en su paquete:
- 1 altavoz Bluetooth
- 1 x Detachable Phone Stand
- 1 x cable de carga USB
- 1 x Cordón
- 1 x Manual de usuario
3. Producto terminadoview
The Funistree Portable Bluetooth Speaker with Phone Stand is a versatile device combining audio playback with a convenient phone holder. It features a compact design, Bluetooth 5.0 connectivity, and a white noise function.
3.1 Componentes
The device consists of two main parts: the speaker unit and the detachable phone stand. The speaker unit has control buttons and a charging port.
Imagen: Producto principal view, illustrating the speaker with the phone stand attached and detached.
3.2 botones de control
The speaker unit features four control buttons on its front panel:
- + Botón: Volume Up / Next Track (in Bluetooth mode) / Next Sound (in White Noise mode)
- - Botón: Volume Down / Previous Track (in Bluetooth mode) / Previous Sound (in White Noise mode)
- Botón de reproducción/pausa (⏸): Reproducir/Pausar audio
- Botón M: Mode Switch / Power On/Off
Imagen: Detallada view de los botones de control del altavoz.
4. Configuración
4.1 Carga inicial
- Connect the provided USB charging cable to the USB-C port on the speaker unit.
- Conecte el otro extremo del cable a un adaptador de corriente USB de 5 V (no incluido).
- A small red LED indicator will illuminate during charging. It will turn off once the battery is fully charged.
- Deje pasar aproximadamente 3 horas para una carga completa antes del primer uso.
4.2 Attaching the Phone Stand
The phone stand attaches magnetically to the top of the speaker unit. Align the stand with the magnetic area on the speaker until it securely clicks into place.
Image: Speaker with phone stand attached, demonstrating its use.
5. Instrucciones de funcionamiento
5.1 Encendido y apagado
- Para encender: Press and hold the 'M' button for approximately 2 seconds. You will hear a voice prompt stating "Power-on Bluetooth Mode".
- Para apagar: Press and hold the 'M' button for approximately 2 seconds. You will hear a voice prompt stating "Power off".
5.2 Modo Bluetooth
- After powering on, the speaker will automatically enter Bluetooth pairing mode. A voice prompt will say "pairing", and a blue LED ring will flash.
- On your smartphone, tablet, or computer, enable Bluetooth and search for available devices. Select "H77" from the list.
- Once successfully paired, a voice prompt will say "connected", and the blue LED ring will remain solid.
- Ahora puedes reproducir audio desde tu dispositivo conectado a través del altavoz.
- Use the '+' and '-' buttons to adjust volume. Press and hold '+' or '-' to skip to the next/previous track.
- Press the Play/Pause button (⏸) to pause or resume playback.
5.3 White Noise Mode
- While the speaker is on, double-press the 'M' button to switch to White Noise Mode. A voice prompt will say "white noise mode".
- The speaker will begin playing a soothing sound. There are 10 different white noise sounds available, including Ocean, Wind, Rain, Bird, Heartbeat, Campfire, Thunderstorm, Brook, Fan, and Piano.
- Use the '+' and '-' buttons to cycle through the different white noise sounds.
- Press the Play/Pause button (⏸) to pause or resume the white noise playback.
- The device features a timer function (15/30/60 minutes) and a memory function for your last selected sound. Refer to the included quick start guide for specific timer activation instructions.
Imagen: Más alláview of the 10 white noise sounds and timer features.
5.4 Phone Stand Usage
The detachable phone stand provides an adjustable viewing angle for your smartphone or tablet. It features non-slip silicone pads to secure your device.
- Place your device onto the stand.
- Ajuste el ángulo del soporte a su gusto. viewing position. The stand's hinges allow for flexible positioning.
- The non-slip pads help prevent your device from sliding.
Image: Demonstrating the adjustable angle and stability features of the phone stand.
6. Mantenimiento
- Limpieza: Use a soft, dry cloth to clean the surface of the speaker and phone stand. Do not use abrasive cleaners or solvents.
- Almacenamiento: Guarde el dispositivo en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.
- Cuidado de la batería: Para prolongar la vida útil de la batería, evite descargarla por completo con frecuencia. Cargue el dispositivo regularmente, incluso si no lo usa durante períodos prolongados.
- Exposición al agua: Este dispositivo no es resistente al agua. Evite la exposición al agua o a la humedad alta.
7. Solución de problemas
Si tiene problemas con su dispositivo, consulte los siguientes problemas y soluciones comunes:
| Problema | Posible causa | Solución |
|---|---|---|
| El dispositivo no enciende | Batería baja | Cargue el dispositivo durante al menos 3 horas. |
| No se puede emparejar a través de Bluetooth | Bluetooth not enabled on source device; speaker not in pairing mode; too far from speaker | Ensure Bluetooth is on and visible on your device. Power cycle the speaker to re-enter pairing mode. Keep devices within 10 meters. |
| Sin sonido | Volume too low; device not connected; incorrect mode | Increase volume on both speaker and source device. Verify Bluetooth connection. Ensure speaker is in Bluetooth mode for music playback. |
| Phone stand is unstable | Incorrect angle; heavy device; magnetic connection not secure | Adjust the stand to a more stable angle. Ensure the magnetic connection between the stand and speaker is firm. Use the stand on a flat, stable surface. |
8. Especificaciones
| Característica | Detalle |
|---|---|
| Marca | Funistre |
| Número de modelo | FT-T-YXZJH77-BK-KLE-DE |
| Color | Dark (Foncé) |
| Tipo de altavoz | Bookshelf (Étagantes de) |
| Características especiales | Flexible, Hands-free, Portable, Detachable Phone Stand, Magnetic Attachment, Breathing Light, White Noise Function |
| Conectividad | Bluetooth |
| Dispositivos compatibles | Smartphones, Tablets, Laptops, Desktop Computers |
| Modelos de teléfonos compatibles | iPhone 12, iPhone 11, iPhone X, Samsung Galaxy S21, Samsung Galaxy S20, Samsung Galaxy Note 20 (and similar sized devices) |
| Dimensiones del producto (L x An x Al) | 10 x 10 x 18 cm |
| Peso | 460 gramos |
| Capacidad de la batería | 1500 mAh |
| Tiempo de reproducción | Hasta 7 horas |
| Material | Silicone (for non-slip pads) |
9. Información de seguridad
- No desmonte, repare ni modifique el dispositivo.
- Mantenga el dispositivo alejado del agua, fuego, altas temperaturas y sustancias corrosivas.
- No exponga el dispositivo a la luz solar directa durante períodos prolongados.
- Deseche el dispositivo y su batería de forma responsable según las regulaciones locales.
- Mantener fuera del alcance de los niños.
10. Garantía y soporte
This product is covered by a standard manufacturer's warranty. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty purposes.