Maxxima Horizontal LED Step Light Instruction Manual

1. Producto terminadoview

The Maxxima Horizontal LED Step Light (Model MEW-SW203B-02) is designed to provide efficient and adjustable illumination for indoor and outdoor stairways, pathways, and decks. This fixture features a 3 CCT (Correlated Color Temperature) selectable switch, allowing users to choose between 3000K (Warm White), 4000K (Neutral White), and 5000K (Daylight) to suit various lighting preferences and environments. Its durable aluminum construction and IP65 rating ensure suitability for wet, dampo lugares secos.

Figura 1: Frente view of the Maxxima Horizontal LED Step Light in black finish.

2. Información de seguridad

• ADVERTENCIA: Riesgo de descarga eléctrica. Desconecte la alimentación desde el fusible o disyuntor antes de realizar cualquier instalación o mantenimiento.
• Este producto debe ser instalado de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y el funcionamiento del producto y los peligros involucrados.
• Asegúrese de que todas las conexiones eléctricas sean seguras y cumplan con los códigos y ordenanzas locales.
• No instale este accesorio con las manos mojadas o mientras esté parado sobre superficies mojadas o húmedas.amp superficies.
• This fixture is designed for 120VAC operation. Do not connect to any other voltage.
• No modifique el accesorio ni lo utilice para fines distintos a su uso previsto.

3. Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar la instalación:

• Maxxima Horizontal LED Step Light Unit (2-Pack)
• Herrajes de montaje (tornillos, tuercas para cables)
• Manual de instrucciones (este documento)

Figura 2: Explosión view showing the step light components, including the faceplate and internal module.

4. Especificaciones

5. Instrucciones de instalación

Antes de comenzar: Ensure power is turned OFF at the circuit breaker or fuse box to avoid electrical shock. If you are unsure about electrical wiring, consult a qualified electrician.

1. Prepare la caja de conexiones: Ensure you have a standard one-gang junction box installed in the desired location.
2. Conectar el cableado:
   • Conectar el negro Cable desde el accesorio hasta el caliente (black) wire from the junction box.
   • Conectar el blanco Cable desde el accesorio hasta el neutral (white) wire from the junction box.
   • Conectar el verde Cable desde el accesorio hasta el suelo (green or bare copper) wire from the junction box.
   Asegure todas las conexiones con las tuercas para cables proporcionadas.
3. Seleccionar temperatura de color (CCT): Before mounting, locate the CCT selection switch on the back of the light module. Slide the switch to your desired color temperature: 3000K (Warm White), 4000K (Neutral White), or 5000K (Daylight).

   Figure 3: Back of the light module with CCT selection switch (3000K/4000K/5000K).
4. Mount the Light Module: Carefully tuck the wires into the junction box. Align the light module with the junction box and secure it using the provided mounting screws.
5. Coloque la placa frontal: Once the module is securely mounted, snap or screw the decorative faceplate onto the light module.
6. Restaurar energía: Turn the power back ON at the circuit breaker or fuse box. Test the light to ensure proper operation.

Figure 4: Maxxima LED Step Light installed on a staircase wall.

Guía de video de instalación

Video 1: This video demonstrates the components of the Maxxima Horizontal LED Step Light, how to select the color temperature (3000K, 4000K, 5000K) using the switch, and the final appearance of the light installed.

6. Instrucciones de funcionamiento

The Maxxima Horizontal LED Step Light operates by simply turning on the power at the wall switch connected to the fixture. The chosen color temperature (3000K, 4000K, or 5000K) will illuminate once power is supplied. The CCT setting is selected during installation and remains constant until manually changed.

Figure 5: Close-up of the step light emitting warm white light (3000K).

7. Mantenimiento

The LED step light requires minimal maintenance. To clean the fixture:

• Ensure power is OFF before cleaning.
• Limpie la superficie exterior con un paño suave y seco.amp paño.
• No utilice limpiadores abrasivos ni disolventes, ya que pueden dañar el acabado o los componentes eléctricos.
• Periodically check for any loose connections or damage to the wiring, especially for outdoor installations.

8. Solución de problemas

If the LED step light is not functioning correctly, refer to the following common issues and solutions:

• La luz no se enciende:
  • Check if the power supply is ON at the circuit breaker.
  • Verify that all wire connections are secure and correctly made (hot to hot, neutral to neutral, ground to ground).
  • Ensure the fixture is receiving the correct voltage (120 VCA).
• La luz parpadea o se atenúa:
  • Verifique si hay conexiones de cables sueltas.
  • Ensure the fixture is not connected to a dimmer switch unless explicitly rated for dimming (this model is not specified as dimmable).
  • Verificar suministro de energía estable.
• Temperatura de color incorrecta:
  • Desconecte la alimentación del dispositivo.
  • Remove the faceplate and module to access the CCT selection switch.
  • Adjust the switch to the desired setting (3000K, 4000K, or 5000K).
  • Reassemble and restore power.

If issues persist after following these steps, contact Maxxima customer support.

9. Garantía y soporte

This Maxxima Horizontal LED Step Light is covered by a 3 año de garantía a partir de la fecha de compra. Esta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Keep your purchase receipt as proof of purchase.

Información del contacto: Refer to the Maxxima websitio o su documentación de compra para obtener los datos de contacto más actualizados.