1. Información de seguridad
Please read these safety instructions carefully before using the Speedlink EXCELLO NX RGB Headset Stand. Keep this manual for future reference.
- No exponga el dispositivo a la humedad, temperaturas extremas o luz solar directa.
- No intente desmontar ni modificar el dispositivo. Esto podría anular la garantía y causar daños.
- Use only with compatible USB power sources.
- Mantener fuera del alcance de los niños.
- Limpie el dispositivo con un paño suave y seco. No utilice limpiadores abrasivos ni disolventes.
2. Contenido del paquete
Asegúrese de que todos los artículos estén presentes en el paquete:
- Speedlink EXCELLO NX RGB Headset Stand
- Integrated USB-A Connection Cable (1.2m)
3. Producto terminadoview
The Speedlink EXCELLO NX is a multifunctional RGB headset stand designed to keep your gaming headset organized while providing additional connectivity options. It features dynamic RGB lighting and an integrated USB hub.
Figura 3.1: Frente view of the EXCELLO NX RGB Headset Stand, showcasing its design and illuminated base.
Características principales:
- Iluminación RGB: 9 different lighting modes, controllable via a touch sensor.
- Concentrador USB integrado: Includes 1x USB-C port and 2x USB-A ports for connecting additional devices.
- Diseño que ahorra espacio: Keeps your headset organized and desk clutter-free.
- Base estable: Non-slip underside ensures secure placement on surfaces.
Figure 3.2: Detail of the integrated USB hub, showing one USB-C and two USB-A ports.
4. Instrucciones de configuración
Follow these steps to set up your EXCELLO NX RGB Headset Stand:
- Desembalaje del soporte: Carefully remove the headset stand from its packaging.
- Coloque el soporte: Place the stand on a stable, flat surface on your desk. Ensure the non-slip base is fully in contact with the surface.
- Conectarse a la alimentación/datos: Plug the integrated USB-A cable from the headset stand into an available USB-A port on your computer or a compatible USB power adapter. The stand will power on, and the RGB lighting will activate.
- Place Headset: Hang your gaming headset on the designated holder at the top of the stand.
Figura 4.1: Perfil lateralfile of the headset stand, illustrating its stable design for holding a headset.
5. Instrucciones de funcionamiento
5.1. Control de iluminación RGB
The EXCELLO NX features a touch sensor for controlling its RGB lighting modes. The touch sensor is located on the base of the stand.
- Un solo toque: Tap the touch sensor to cycle through the 9 available RGB lighting modes.
- Pulsación larga: Press and hold the touch sensor for approximately 3 seconds to turn the RGB lighting off. Repeat the long press to turn it back on to the last selected mode or default.
Figura 5.1: Angulado view showing the illuminated light strip and the base where the touch sensor is located.
5.2. Uso del concentrador USB
The integrated USB hub allows you to connect additional devices directly to the headset stand.
- Puerto USB-C: Use this port to connect devices that require a USB-C connection for charging or data transfer.
- Puertos USB-A (x2): Use these two ports to connect standard USB-A devices such as mice, keyboards, USB drives, or for charging other peripherals.
Note: The USB hub operates at USB 2.0 speeds. Ensure your computer's USB port provides sufficient power for all connected devices.
6. Mantenimiento
To ensure the longevity of your EXCELLO NX RGB Headset Stand, follow these simple maintenance guidelines:
- Limpieza: Wipe the stand with a soft, dry, lint-free cloth. Do not use liquid cleaners, sprays, or abrasive materials.
- Almacenamiento: Cuando no lo utilice durante períodos prolongados, guarde el soporte en un lugar fresco y seco, alejado de la luz solar directa.
- Cuidado de cables: Avoid bending or crimping the integrated USB cable excessively.
7. Solución de problemas
If you encounter issues with your EXCELLO NX RGB Headset Stand, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| RGB lighting does not turn on. | Sin energía o conexión suelta. | Ensure the USB-A cable is securely connected to a powered USB port on your computer or adapter. Try a different USB port. |
| No se reconocen los dispositivos concentradores USB. | Insufficient power or driver issue. | Connect the stand to a USB port that provides sufficient power. Try connecting devices directly to your computer to rule out driver issues. Disconnect and reconnect the device. |
| RGB lighting is stuck on one mode or unresponsive. | Error temporal del software o problema del sensor. | Disconnect the stand from its power source for a few seconds, then reconnect it. Ensure the touch sensor area is clean and unobstructed. |
If the problem persists, please contact Speedlink customer support.
8. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | SL-800911-BK |
| Dimensiones (L×An×Al) | 150 x 113 x 275 mm (5.91 x 4.45 x 10.83 pulgadas) |
| Peso | 226 g (8 onzas) |
| Puertos USB | 1x USB-C, 2x USB-A (USB 2.0) |
| Conexión a la computadora | USB-A (integrated cable) |
| Longitud del cable | 1.2 metros |
| Iluminación | RGB with 9 modes, touch sensor control |
| Color | Negro |
9. Garantía y soporte
Speedlink products are manufactured to high quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Speedlink websitio.
For technical support or customer service inquiries, please visit the Speedlink support page or contact their customer service department directly. Contact information can typically be found on the Speedlink websitio: www.speedlink.com