iMaihom 65W LED Security Light with Motion Sensor

Introducción

This manual provides comprehensive instructions for the installation, operation, and maintenance of your iMaihom 65W LED Security Light with Motion Sensor (Model BDP60G-3). Designed for outdoor use, this hardwired floodlight offers powerful illumination with advanced motion detection and dusk-to-dawn capabilities. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

Características del producto

• Wide Lighting Area: Three adjustable heads provide extensive illumination coverage up to 1150 sq. ft., ideal for yards, gardens, and driveways.
• Highly Sensitive Motion Sensor: Promptly activates lights upon detecting movement, enhancing security.
• Modo del anochecer al amanecer: Automatically turns off during the day, lights up at night at 30% brightness, and increases to 100% brightness upon motion detection.
• Fácil instalación: Designed for straightforward hardwired connection to a mounting bracket.
• Clasificación de impermeabilidad IP65: Constructed from high-quality ABS material, ensuring durability and reliable performance in various weather conditions, including heavy rain and snow.

Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar la instalación.

• iMaihom 65W LED Security Light (1 unit)
• Mounting Hardware (screws, expansion rubber plugs, EVA gasket, silicone gasket, wire nuts)
• Manual de instrucciones

Image: The iMaihom 65W LED Security Light, showing its three adjustable light heads and integrated motion sensor.

Información de seguridad

ADVERTENCIA: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. All wiring connections must be in accordance with local and national electrical codes. If you are unfamiliar with electrical wiring, consult a qualified electrician.

• Asegúrese de que la superficie de montaje pueda soportar el peso del accesorio.
• No conectar a un interruptor de regulación de intensidad.
• Do not look directly into the LED lights when illuminated.

Configuración e instalación

This security light is designed for hardwired installation. Follow these steps carefully:

1. Apague la energía: Antes de comenzar, asegúrese de que el suministro de energía a la caja de conexiones esté apagado en el disyuntor.
2. Coloque el soporte de montaje: Secure the mounting bracket to the junction box using the provided screws. Ensure it is firmly attached.
3. Conectar el cableado:
   • Conecte el cable negro del artefacto al cable negro (activo) de la caja de conexiones.
   • Conecte el cable blanco del artefacto al cable blanco (neutro) de la caja de conexiones.
   • Connect the green (ground) wire from the fixture to the bare copper or green (ground) wire from the junction box.
   • Utilice las tuercas para cables proporcionadas para asegurar todas las conexiones.
4. Monte el accesorio: Align the fixture with the mounting bracket and secure it using the long machine screw. Ensure the foam gasket is properly seated to prevent water ingress.
5. Ajuste de los cabezales de luz: Loosen the screws on the side light heads and the motion sensor to adjust their angles as desired. Tighten screws once adjusted.
6. Restaurar energía: Vuelva a encender la energía en el disyuntor.

Image: Detailed diagram illustrating the three-step installation process, including securing the mounting bracket, connecting wires, and attaching the light fixture.

Instrucciones de funcionamiento

The iMaihom security light offers multiple operating modes controlled by switches on the motion sensor unit.

Selección de modo

• Sensor Mode (Motion Only): The light remains off until motion is detected. It will then illuminate at 100% brightness for a set duration.
• Modo del anochecer al amanecer (D2D): The light automatically turns on at 30% brightness when it gets dark and stays on. Upon detecting motion, it brightens to 100% for a set duration, then returns to 30% brightness.
• Modo de prueba: Used during installation to check the motion sensor's range and light coverage. The light will turn on for a short period when motion is detected, regardless of ambient light.

Ajustes

The motion sensor unit features dials for adjusting TIME, DIST (distance/sensitivity), and MODE.

• TIEMPO: Adjusts how long the light stays on after motion is detected (e.g., 10 seconds to 10 minutes).
• DIST (Sensitivity): Controls the detection range of the motion sensor (e.g., Low, Medium, High).
• MODO: Selects between Sensor, D2D, and Test modes.

Imagen: Primer plano view of the motion sensor's control dials for Mode, Time, and Distance settings.

Image: Visual representation of the Dusk to Dawn mode, showing the light turning on at 30% brightness at night and increasing al 100% al detectar movimiento.

Mantenimiento

The iMaihom LED Security Light is designed for minimal maintenance.

• Limpieza: Limpie periódicamente la lámpara y la lente del sensor de movimiento con un paño suave.amp Paño para eliminar la suciedad y los residuos. No utilice limpiadores abrasivos ni disolventes.
• Protección contra la intemperie: The IP65 waterproof rating ensures protection against dust and water jets. No special weatherproofing is required under normal conditions.
• Inspección: Annually inspect wiring and mounting for any signs of wear, damage, or loosening.

Image: The iMaihom security light demonstrating its IP65 waterproof capability during rainfall.

Solución de problemas

If your iMaihom LED Security Light is not functioning as expected, refer to the following common issues and solutions:

Presupuesto

Image: Diagram detailing the dimensions of the iMaihom 65W LED Security Light.

Garantía y soporte

The iMaihom 65W LED Security Light (Model BDP60G-3) comes with a Garantía del fabricante de 2 años.

For technical support, troubleshooting assistance, or warranty claims, please contact iMaihom customer service. You can find more information and contact details on the official iMaihom store page: iMaihom Store.