URintells Cuising 20 Bar Espresso Machine Instruction Manual

Introducción

This manual provides detailed instructions for the safe and efficient operation of your URintells Cuising 20 Bar Espresso Machine. Please read all instructions carefully before use and retain this manual for future reference.

Información de seguridad

• Asegúrese de que la máquina esté colocada sobre una superficie estable y nivelada.
• No sumerja el aparato, el cable o el enchufe en agua ni en ningún otro líquido.
• Mantener fuera del alcance de los niños.
• Desenchufe del tomacorriente cuando no esté en uso y antes de limpiarlo.
• Use only with 120 Volts (AC) power supply.
• The machine features an automatic power-off function after approximately 15 minutes of inactivity to ensure safety.

Producto terminadoview y componentes

Familiarícese con las partes de su máquina de café expreso:

Image: URintells Cuising Espresso Machine with labeled components for easy identification.

1. Calentador de tazas
2. Pantalla LED
3. Control panel (Power, Americano/Hot Water, Espresso, Espresso x 2, Steam)
4. ESE pod filter
5. Filtro de copa individual
6. Filtro de doble copa
7. Filter holder (Portafilter)
8. Rejilla de bandeja de goteo
9. Bandeja de goteo
10. Bandeja de goteo interior
11. Perilla de vapor
12. Thermo insulated handle
13. Varita de vapor
14. Boquilla de vapor
15. Botón de encendido/apagado
16. Measure spoon with tamper
17. Tapa del tanque de agua
18. Water tank (44 oz removable)

Componentes incluidos:

• 1x Manual de instrucciones
• 1x Espresso Machine With Milk Frother
• 1x 44 oz Removable Water Tank
• 1x 51mm One Cup Filter
• 1x 51mm Two Cup Filter
• 1x ESE Pod Filter
• 1x Stainless Steel 51mm Portafilter
• 1x camisetaamper con cuchara

Configuración y primer uso

Before First Use: Releasing Air from the Water Pump

It is essential to release air from the water pump before first use to ensure smooth coffee extraction. Follow these steps:

1. Fill the water tank with water up to the MAX level and install it in the designated position. (Do not exceed the max and min line).
2. Turn on the switch at the lower right corner of the machine.
3. The four buttons on the control panel will blink, and the machine will start to preheat automatically.
4. When preheating is finished (approximately 50 seconds), the LED screen will display the temperature.
5. Coloque una taza debajo de la varilla de vapor.
6. Turn the steam knob (11) to the "steam" position.
7. Let the hot water flow out of the steam wand for about 8 seconds.
8. Turn the steam knob back to the "OFF" position.

Image: Visual guide for the first use cycle, demonstrating how to release air from the water pump.

Instrucciones de funcionamiento

Preparando espresso

Your machine features 20 Bar professional pump pressure and pre-soaking technology for optimal extraction and flavor.

1. Llene el tanque de agua con agua.
2. Add ground coffee to the portafilter (7) and tamp evenly using the tamper with spoon (16). Choose between single (5), double (6), or ESE pod (4) filters based on your preference.
3. Place the portafilter into the espresso machine and lock it by turning the handle to the right.
4. Press the ON/OFF button (15) and wait for the espresso machine to preheat. Once the temperature is displayed on the LED screen (2), select your desired coffee mode (Espresso or Espresso x 2).

Image: Step-by-step guide for preparing espresso, from filling the water tank to selecting the coffee mode.

Control de temperatura

The LED display shows the water temperature. You can choose from three adjustable extraction temperatures: 192°F (Low), 198°F (Optimal), and 203°F (High) to suit your taste.

Image: LED display showing water temperature and options for low, optimal, and high temperature modes.

Espuma de leche

The powerful steam wand (13) allows you to create rich, barista-grade microfoam milk for lattes and cappuccinos. The steam wand is 360° adjustable and removable for easy cleaning.

1. Llene una jarra con leche fría.
2. Insert the steam nozzle (14) into the milk surface, about 0.4 inches deep.
3. Turn the steam knob (11) to the "steam" position.
4. Check to see if the milk is swirling. As the milk level rises, lower the pitcher so that the steam nozzle remains below the surface of the milk.
5. When the desired foam is achieved, immerse the steam wand halfway into the milk.
6. Milk is ready when the pitcher is too hot to touch for 3 seconds.
7. Remove the pitcher from the steam wand.
8. Knock and swirl the pitcher, if needed, to get rid of large bubbles.
9. Vierta la leche espumada en el café.

Image: Step-by-step visual guide for frothing milk with the steam wand.

Making Americano & Hot Water

The machine features an independent hot water pipe for convenience.

• To make an Americano, press the "Americano & Hot Water" button once.
• For hot water only, press the "Americano & Hot Water" button twice consecutively.

Image: Control panel illustrating single press for Americano and double press for hot water.

Mantenimiento y limpieza

La limpieza regular garantiza un rendimiento óptimo y la longevidad de su máquina de café expreso.

Bandeja de goteo

• The drip tray (9) is removable and adjustable to accommodate cups of different heights.
• Empty and clean the drip tray regularly. It is not dishwasher safe.

Image: The adjustable drip tray allows for various cup sizes and is easily removed for cleaning.

Tanque de agua

• The 44 oz water tank (18) is detachable for easy refilling and hand washing.
• Ensure water levels are between MIN and MAX lines.

Image: The removable water tank is shown with its maximum and minimum fill indicators.

Portafiltros y Filtros

• Clean the portafilter (7) and filters (4, 5, 6) after each use. ESE pod filters are particularly easy to use and clean.

Image: The three filter options (single, double, ESE pod) are displayed, highlighting their ease of use and cleaning.

Solución de problemas

• No coffee coming out: Ensure the water tank is filled and properly seated. Perform the first-use air release procedure if not already done. Check that the portafilter is correctly locked.
• Water leftover in the coffee holder: This can occur if the coffee grounds are not tamped firmly enough or if the grind is too coarse. Experiment with tamping pressure and grind size.
• Buttons flashing (over-pressure protection): If the single and double shot buttons are flashing, it indicates over-pressure. This can happen if the coffee grind is too fine or tamped too hard. Release pressure by pressing the steam button or turning the steam knob. Adjust grind size or tampPresión de entrada.
• Machine not heating up: Ensure the power switch is on and the machine is plugged into a working outlet. Allow approximately 50 seconds for preheating.
• Used or unclean machine received: Contact URintells Cuising via Amazon for assistance.

For further assistance, refer to the relevant instructional videos on the product page or contact URintells Cuising customer support via Amazon.

Presupuesto

Garantía y soporte

Your URintells Cuising cappuccino machine comes with detailed instructions. For any questions about operation, refer to the relevant instructional videos on the product page or contact us via Amazon. If you receive a used or unclean cappuccino maker, please connect with us, and we will assist in resolving the issue.

Vídeos oficiales de productos

Watch these official videos from URintells Cuising for visual guidance on using your espresso machine: