RAB Lighting SR8 8 ft. LED Strip Fixture Instruction Manual

1. Producto terminadoview

The RAB SR8 is an 8-foot LED strip fixture designed for commercial lighting applications. This fixture features field-adjustable power settings (40W, 50W, 60W) and color temperatures (3500K, 4000K, 5000K), providing flexibility to suit various lighting needs. It is 0-10V dimmable and compatible with 120-277V electrical systems, offering efficient and versatile illumination.

Figura 1.1: Encimaview of the RAB SR8 8 ft. LED Strip Fixture. This image displays the full length of the white LED strip fixture, highlighting its sleek and linear design suitable for surface mounting in commercial environments.

2. Información de seguridad

• ADVERTENCIA: Riesgo de descarga eléctrica. Desconecte la alimentación desde el fusible o disyuntor antes de realizar cualquier instalación o mantenimiento.
• La instalación debe ser realizada por un electricista calificado de acuerdo con todos los códigos eléctricos nacionales y locales.
• Asegúrese de que el volumen de suministrotage is correct for the fixture (120-277V).
• No manipule artefactos energizados con las manos mojadas.
• No lo instale cerca de materiales combustibles.
• Este accesorio está diseñado únicamente para uso en interiores.

3. Configuración e instalación

3.1. Preinstalación

• Desembale el dispositivo e inspecciónelo para detectar posibles daños.
• Ensure all necessary components are present (LED Fixture).
• Desconecte la energía en el disyuntor antes de comenzar la instalación.

3.2. Montaje del dispositivo

The SR8 fixture is designed for surface mounting. Refer to the dimensional drawing for precise measurements and mounting hole locations.

Figura 3.1: Dimensional drawing of the RAB SR8 fixture. This diagram illustrates the length (94.49 inches), width (2.36 inches), and height (2.79 inches) of the fixture, along with potential mounting points.

1. Mark the desired mounting locations on the ceiling or wall, ensuring they align with the fixture's mounting points.
2. Drill appropriate holes for mounting screws (not included).
3. Secure the fixture to the mounting surface using suitable hardware.

3.3. Cableado eléctrico

Connect the fixture to the electrical supply according to the wiring diagram below. Ensure all connections are secure and comply with local electrical codes.

Figura 3.2: Wiring diagram for the RAB SR8 LED Strip Fixture. This diagram shows the connections for Line (Black), Common (White), (+) DIMV (Purple), (-) DIMV (Pink), Vaux 12V (Red), and Ground (Ground) to the light fixture.

• Connect the black wire from the fixture to the LINE (hot) wire from the supply.
• Connect the white wire from the fixture to the COMMON (neutral) wire from the supply.
• Connect the green or bare copper wire from the fixture to the GROUND wire from the supply.
• For 0-10V dimming, connect the purple wire to (+) DIMV and the pink wire to (-) DIMV from the dimming control. If dimming is not used, cap these wires individually.
• Ensure all wire nuts or connectors are tightened securely.

4. Instrucciones de funcionamiento

The RAB SR8 fixture allows for field adjustment of both power output and color temperature to customize lighting performance.

Figura 4.1: De cerca view of the power (W) and color temperature (CCT) adjustment switches on the RAB SR8 fixture. This image shows the physical switches used to select desired wattage and Kelvin temperature settings.

4.1. Power Adjustment (Wattage)

The fixture includes a switch to select the desired wattage output. This allows for optimization of brightness and energy consumption.

• Locate the "Power (W)" switch on the fixture.
• Seleccione una de las siguientes configuraciones: 40 W, 50 W, o 60 W.
• Ensure power is disconnected before adjusting this switch.

4.2. Color Temperature Adjustment (CCT)

The fixture also features a switch to select the desired color temperature, allowing you to choose between different light appearances.

• Locate the "Color Temperature (CCT)" switch on the fixture.
• Seleccione una de las siguientes configuraciones: 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
• Ensure power is disconnected before adjusting this switch.

4.3. Funcionalidad regulable

The SR8 fixture supports 0-10V dimming. When connected to a compatible 0-10V dimmer, the light intensity can be adjusted from 100% down to 10% (or lower, depending on dimmer specifications).

• Ensure the fixture is correctly wired for 0-10V dimming as per Section 3.3.
• Use a compatible 0-10V dimmer switch (sold separately) to control the light output.

5. Mantenimiento

The RAB SR8 LED Strip Fixture requires minimal maintenance. Regular cleaning can help maintain optimal performance and appearance.

• Limpieza: Desconecte la alimentación antes de limpiar. Utilice un paño suave, seco o ligeramente húmedo.amp Paño para limpiar el exterior de la lámpara. No utilice limpiadores abrasivos ni disolventes.
• LED: La fuente de luz LED integrada está diseñada para una larga vida útil y no requiere reemplazo.

6. Solución de problemas

Si el dispositivo no funciona como se espera, consulte los siguientes problemas y soluciones comunes:

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support.

7. Especificaciones

8. Información de garantía

The RAB SR8 LED Strip Fixture comes with a Limited Warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official RAB Lighting webSitio web o contacte directamente con el servicio de atención al cliente. Conserve su comprobante de compra para reclamaciones de garantía.

9. Atención al cliente

For technical assistance, replacement parts, or any questions not covered in this manual, please contact RAB Lighting customer support:

• Websitio: www.rablighting.com
• Consulte la webSitio para obtener información de contacto actualizada, incluidos números de teléfono y soporte por correo electrónico.