Ashly EcoTour™ 500.2 Professional Touring Power AmpLifier Manual de usuario

1. Introducción

The Ashly EcoTour™ 500.2 is a high-efficiency touring power amplifier designed for professional audio applications. It delivers 2 x 500W at 2/4 Ohms, 250W at 8 Ohms, and 1000W bridged at 70V. This amplifier is engineered for optimal performance, minimizing electricity usage, and reducing energy costs. This manual provides essential information for the safe and efficient operation of your EcoTour™ 500.2 ampmás duradero.

2. Información de seguridad

Lea y comprenda todas las instrucciones de seguridad antes de utilizar este dispositivo. Conserve este manual para futuras consultas.

• WARNING: RISK OF HAZARDOUS ENERGY. Refer to the operating manual for detailed safety procedures.
• PRECAUCIÓN: Para reducir el riesgo de incendio o descarga eléctrica, no exponga este equipo a la lluvia o la humedad.
• Este dispositivo cumple con la Parte 15 de las Normas de la FCC. Su funcionamiento está sujeto a las dos condiciones siguientes: (1) Este dispositivo no puede causar interferencias perjudiciales y (2) este dispositivo debe aceptar cualquier interferencia que reciba, incluidas las interferencias que puedan causar un funcionamiento no deseado.
• Asegúrese de que haya una ventilación adecuada para evitar el sobrecalentamiento. No bloquee las aberturas de ventilación.
• Always disconnect the power cord before performing any maintenance or making connections.

3. Producto terminadoview

The Ashly EcoTour™ 500.2 is a robust and efficient power amplifier designed for professional touring and fixed installations. It features a durable 19-inch rack-mountable chassis.

3.1 Características del panel frontal

Figura 1: Front panel of the Ashly EcoTour™ 500.2 amplifier, showing the power switch on the left and individual channel gain controls with LED indicators on the right.

• Interruptor de alimentación: Located on the left side of the front panel, used to turn the ampencendido/apagado del filtro.
• Controles de ganancia del canal: Individual rotary knobs for adjusting the volume/gain of each channel (CH-A, CH-B, CH-C, CH-D).
• Indicadores LED: Each channel features LIMIT and SIG LEDs to indicate signal presence and clipping.

3.2 Características del panel trasero

Figura 2: Rear panel of the Ashly EcoTour™ 500.2 amplifier, detailing input/output connections, DIP switches, and power input.

• Input Connectors (CH1/CH2): Dual XLR and 1/4-inch (TRS/TS) input jacks for each channel.
• Speaker Outputs (CH1/2, CH2): SpeakON connectors for speaker connections. Supports CH1 1+/-, CH2 2+/-, and Bridge 1+/2+.
• Bridge/Normal Switch: Selects between normal stereo operation and bridged mono operation for increased power output.
• Configuración del interruptor DIP: Configurable switches for Front Panel Disable, High-Pass Filter (HPF), Limiter, and Gain settings (26dB, 32dB, 38dB, 1.4V).
• Entrada de CA: Standard IEC power inlet for the detachable AC power cord.
• VolumentagmiSelector: A switch to select between 115V and 230V operation for international use.
• Ventiladores de refrigeración: Two cooling fans provide front-to-rear airflow for thermal management.

4. Configuración

Follow these steps to properly set up your Ashly EcoTour™ 500.2 ampmás duradero.

1. Desembalaje: Retire con cuidado el ampRetire el dispositivo de su embalaje. Inspeccione si presenta daños.
2. Montaje en bastidor: El amplifier is designed for 19-inch rack mounting. Secure it using appropriate rack screws. Ensure adequate space for airflow around the unit.
3. Volumentage Selección: Before connecting to power, verify the voltagEl interruptor selector en el panel trasero está configurado en el volumen correctotage para su región (115 V o 230 V). Volumen incorrectotagLa selección puede dañar la unidad.
4. Conexiones de entrada: Conecte su fuente de audio (mezclador, preamplificador)amplifier, etc.) to the CH1 and CH2 INPUTs on the rear panel using XLR or 1/4-inch cables.
   

   Figura 3: Detail of input connector wiring (XLR and 1/4-inch) on the rear panel.

5. Conexiones de salida: Connect your speakers to the SPEAKER OUTPUTS using SpeakON cables. Ensure correct polarity.
   

   Figura 4: Detail of SpeakON connector wiring on the rear panel.

6. Configuración del interruptor DIP: Adjust the DIP switches on the rear panel according to your system requirements.

   Tabla 1: Configuración del interruptor DIP

   Configuración	Posición ON	Posición APAGADO
   Desactivar panel frontal	Activado	Desactivado
   HPF (filtro de paso alto)	Activado	Desactivado
   Limitador	Activado	Desactivado
   Ganar	26dB, 32dB, 38dB, 1.4V (per channel, specific switch combinations)	Default/Other Gain Setting

   Refer to the detailed diagram on the rear panel for specific gain switch combinations.
7. Conexión de energía: Connect the supplied AC power cord to the AC Input on the rear panel and then to a suitable power outlet.

5. Instrucciones de funcionamiento

Una vez que el amplifier is properly set up, follow these steps for operation.

1. Encendido: Ensure all gain controls are set to minimum. Press the Power Switch on the front panel to turn on the amplifier. The power indicator LED will illuminate.
2. Ajustar ganancia: Slowly increase the individual Channel Gain Controls (CH-A, CH-B, CH-C, CH-D) to achieve the desired output level.
3. LED del monitor:
   • LED DE SEÑAL: Illuminates when an audio signal is present on the channel.
   • LED DE LÍMITE: Se ilumina cuando el amplifier is approaching or reaching its maximum output. Reduce the gain if this LED is constantly lit to prevent clipping and distortion.
4. Bridge Mode (Optional): If higher power output is required for a single speaker, set the Bridge/Normal switch to BRIDGE. Ensure your speaker is rated for bridged operation and connected to the designated bridged output.
5. Apagado: Before powering off, reduce all gain controls to minimum. Then, press the Power Switch to turn off the ampmás duradero.

6. Mantenimiento

El mantenimiento regular garantiza la longevidad y el rendimiento óptimo de su ampmás duradero.

• Limpieza: Utilice un paño suave y seco para limpiar el exterior del amplificador. No utilice limpiadores líquidos ni disolventes.
• Ventilación: Ensure the cooling fans and ventilation grilles are free from dust and obstructions. Periodically clean the grilles with a soft brush or vacuum cleaner.
• Conexiones de cable: Periodically check all input and output cable connections for secure fit and signs of wear.
• Almacenamiento: Si almacena el amplifier for an extended period, ensure it is in a dry, dust-free environment and protected from extreme temperatures.

7. Solución de problemas

Esta sección aborda problemas comunes que puede encontrar con su ampmás duradero.

8. Especificaciones

• Modelo: ECOTOUR500.2-120V-U
• Potencia de salida: 2 x 500W @ 2/4 Ohms, 250W @ 8 Ohms, 1000W bridged @ 70V
• Canales: 2
• Conectores de entrada: XLR, 1/4-inch (TRS/TS)
• Conectores de salida: Hablar en
• Volumentage: 100-240VAC, 50/60Hz (selectable)
• Dimensiones: 16 x 19 x 3.5 pulgadas (40.64 x 48.26 x 8.89 cm)
• Peso del artículo: 18.5 libras (8.39 kg)
• Características: Ultra High-Efficiency Amplification, Eco-friendly design, Stable down to 0.2 Ohms.

9. Garantía y soporte

For warranty information or technical support, please contact Ashly customer service or visit the official Ashly websitio.

Ashly Store: Visit the Ashly Store on Amazon

10. Related Videos (Not Applicable)

No official product videos directly relevant to the Ashly EcoTour™ 500.2 amplifier were found in the provided data. Videos found were for a different product (MUSYSIC MU-D9600) and therefore not included.