1. Introducción
The MiBOXER TRI-PW 500W AC Triac Dimmer is designed for precise control of lighting systems in residential and commercial environments. This device integrates WiFi and 2.4GHz technology, allowing for remote operation via compatible applications and MiBOXER remote controls. It supports triac dimming, ensuring compatibility with a wide range of lighting fixtures, including LED, halogen, and incandescent lights, for smooth and consistent dimming from full brightness to a soft glow.
Imagen 1.1: Másview of the MiBOXER TRI-PW 500W AC Triac Dimmer unit.
2. Información de seguridad
- Instalacion electrica: La instalación debe ser realizada por un electricista calificado de acuerdo con los códigos y regulaciones eléctricas locales.
- Desconexión de energía: Desconecte siempre la alimentación del disyuntor antes de instalar o realizar mantenimiento al regulador de luz.
- VolumentagCompatibilidad: Asegúrese de que el volumen de entradatage matches the dimmer's specifications (100-240V AC).
- Capacidad de carga: Do not exceed the maximum load capacity of 500W. Overloading can cause damage or fire.
- Uso exclusivo en interiores: This device is intended for indoor use in dry locations. Avoid exposure to moisture or extreme temperatures.
- Compatibilidad: Use only with compatible dimmable lighting fixtures (LED, halogen, incandescent).
3. Contenido del paquete
Verifique que todos los componentes estén presentes en el paquete:
- MiBOXER TRI-PW 500W AC Triac Dimmer Unit
- User Manual (may be included as a separate document)
Image 3.1: MiBOXER TRI-PW Dimmer unit shown with its packaging and a user manual.
4. Características del producto
- Powerful 500W Capacity: Supports high-power loads, suitable for various lighting fixtures.
- Tecnología de atenuación Triac: Provides flicker-free dimming for LED, halogen, and incandescent lights.
- WiFi & 2.4GHz Control: Integrates with WiFi and MiBOXER 2.4GHz systems for smartphone or remote control.
- Push Control Compatibility: Allows for quick, on-site dimming adjustments via a push button.
- Control por aplicación y voz: Compatible with major smart home platforms for app-based and voice command control.
- Función de memoria: Retains previous lighting settings after power cycles.
5. Especificaciones
| Característica | Detalle |
|---|---|
| Marca | MiBOXER |
| Nombre del modelo | TRI-PW |
| Característica especial | Atenuador triac de CA de 500 W |
| Clase de banda de frecuencia | Banda única |
| Estándar de comunicación inalámbrica | 802.11b |
| Dispositivos compatibles | Soporte de atenuación PUSH |
| Usos recomendados | Home lighting systems |
| Tecnología de conectividad | Wifi |
| Compatibilidad con hogares inteligentes | Smart Home Compatible (e.g., Amazon Alexa, Google Assistant) |
| Cobertura | LED, halogen, incandescent, high-power loads |
| Frecuencia | 2.4 GHz |
| Dimensiones (aprox.) | 117 mm (largo) x 45 mm (ancho) x 24 mm (alto) |
Image 5.1: Technical drawing showing the approximate dimensions of the TRI-PW dimmer.
Image 5.2: Packaging dimensions for the MiBOXER TRI-PW dimmer.
6. Configuración e instalación
Importante: Asegúrese de que la energía esté desconectada en el disyuntor antes de comenzar la instalación.
Diagrama de cableado
The MiBOXER TRI-PW dimmer supports two primary wiring methods for integration with a push switch. Both methods are suitable for triac dimming LED lights, traditional filament lamps, y halógeno lamps.
Image 6.1: Wiring diagrams for connecting the MiBOXER TRI-PW dimmer with a push switch.
Method 1: Single-Wire Push Switch Connection
- Connect the Live (L) and Neutral (N) input wires from your power supply (100-240V~) to the corresponding 'INPUT' terminals on the dimmer.
- Connect the Live (L) and Neutral (N) output wires to your lighting fixture (100-240V~) from the 'OUTPUT' terminals.
- Connect one wire from the push switch to the 'PUSH' terminal on the dimmer.
- Connect the other wire from the push switch to the Live (L) input terminal.
Method 2: Two-Wire Push Switch Connection
- Connect the Live (L) and Neutral (N) input wires from your power supply (100-240V~) to the corresponding 'INPUT' terminals on the dimmer.
- Connect the Live (L) and Neutral (N) output wires to your lighting fixture (100-240V~) from the 'OUTPUT' terminals.
- Connect the two wires from the push switch directly to the 'PUSH' terminals on the dimmer.
After wiring, secure the dimmer in a suitable electrical box or enclosure. Restore power at the circuit breaker.
7. Instrucciones de funcionamiento
7.1. Push Switch Control
- Prensa breve: Turn the lights ON or OFF.
- Pulsación larga: Adjust the brightness level. Release the button to set the desired brightness.
7.2. WiFi App Control
The TRI-PW dimmer supports control via a smart app (e.g., Tuya Smart app). No additional 2.4G gateway is required for app control.
- Download the compatible smart home app from your device's app store.
- Regístrese o inicie sesión en su cuenta.
- Put the dimmer into pairing mode (refer to the app's instructions or the dimmer's specific pairing procedure, usually involving a long press of the 'SET' button or power cycling).
- Follow the in-app instructions to add the device to your network.
- Once connected, you can control the dimmer's ON/OFF state and brightness from your smartphone.
Imagen 7.1: Example of controlling the dimmer using a smartphone application.
7.3. 2.4GHz Remote Control
The dimmer can be paired with MiBOXER 2.4GHz remote controls for direct wireless control.
- Asegúrese de que el regulador de intensidad esté encendido.
- Refer to your MiBOXER 2.4GHz remote control's manual for specific pairing instructions. Typically, this involves pressing a "Link" or "Pair" button on the remote within a few seconds of powering on the dimmer or pressing the dimmer's 'SET' button.
- A successful pairing is usually indicated by the connected light flashing.
7.4. Control por voz (Alexa/Asistente de Google)
The TRI-PW dimmer is compatible with smart home voice assistants like Amazon Alexa and Google Assistant when integrated through a compatible smart home app.
- Ensure your dimmer is successfully connected to the smart home app (e.g., Tuya Smart).
- Abra la aplicación Amazon Alexa o Google Home.
- Enable the skill or service for the smart home app you are using (e.g., "Tuya Smart" skill).
- Discover devices. Your dimmer should appear in the list.
- Assign a name to your dimmer (e.g., "Living Room Light").
- You can now control your light using voice commands, such as "Alexa, turn on Living Room Light" or "Hey Google, dim Living Room Light to 50%."
Image 7.2: The dimmer is compatible with voice control platforms like Amazon Alexa and Google Assistant.
8. Mantenimiento
- Limpieza: Disconnect power before cleaning. Wipe the dimmer with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Inspección: Revise periódicamente las conexiones del cableado para verificar que estén bien apretadas y que no presenten signos de desgaste o daños.
- Actualizaciones de firmware: If available, check the smart home app for firmware updates to ensure optimal performance and security.
9. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Las luces no se encienden. | No power, incorrect wiring, faulty bulb, dimmer not paired. | Check circuit breaker. Verify wiring according to diagrams. Test bulb. Re-pair dimmer with app/remote. |
| Las luces parpadean o zumban. | Incompatible bulb, overloaded circuit, loose wiring. | Ensure bulbs are dimmable and compatible with triac dimmers. Reduce load. Check wiring connections. |
| Dimmer not responding to app/remote. | Dimmer out of range, WiFi issue, not paired. | Ensure dimmer is within WiFi/2.4GHz range. Check WiFi router. Re-pair dimmer with app/remote. |
| No se puede conectar a WiFi. | Incorrect WiFi password, 5GHz network, dimmer not in pairing mode. | Verify WiFi password. Ensure you are connecting to a 2.4GHz network. Put dimmer into WiFi pairing mode. |
10. Garantía y soporte
This MiBOXER TRI-PW dimmer comes with a 2 año de garantía a partir de la fecha de compra. Esta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso.
The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or acts of nature.
For technical support or warranty claims, please contact your retailer or the manufacturer directly. Please have your purchase receipt and product model number (TRI-PW) available when contacting support.
Para obtener más información, puede visitar el Tienda MiBOXER en Amazon.