Generic Channel Tufted Upholstered Platform Bed (Queen, Light Gray)

1. Información de seguridad

Please read and understand all instructions before beginning assembly and use. Failure to follow these instructions may result in serious injury. Keep these instructions for future reference.

• Mantenga todas las piezas pequeñas fuera del alcance de los niños durante el montaje.
• Asegúrese de que todos los pernos y tornillos estén bien apretados antes de usar. Revíselos periódicamente.
• No utilice herramientas eléctricas para realizar el montaje a menos que se le indique específicamente, ya que apretar demasiado puede dañar los componentes.
• Coloque la cama sobre una superficie nivelada.
• No se pare ni salte sobre el marco de la cama.
• Use only the recommended mattress size for this bed frame.

2. Contenido del paquete

Verify that all parts are present before assembly. If any parts are missing or damaged, contact customer support.

3. Instrucciones de montaje

Siga estos pasos cuidadosamente para ensamblar el marco de la cama. Se recomienda que lo hagan dos personas.

Paso 1: Fije los rieles laterales a la cabecera y al pie de cama

Connect the side rails (B) to the headboard (A) and footboard (C) using the provided bolts and washers from the hardware pack (H). Do not fully tighten bolts until all parts are aligned.

Image: Bed frame structure showing headboard, footboard, and side rails connected.

Paso 2: Instale la barra de soporte central y las patas

Attach the center support bar (E) to the pre-drilled holes on the headboard and footboard. Secure the support legs (F) to the center bar. Ensure the center bar is level and provides adequate support.

Paso 3: Colocar listones de madera

Lay the wooden slats (D) across the side rails, ensuring they are evenly spaced and secured if attachment points are present. The mattress anti-displacement device should be positioned at the foot of the bed to prevent the mattress from sliding.

Image: Close-up of the wooden slats laid across the frame with the mattress anti-displacement bar in place.

Step 4: Attach Decorative Metal Legs

Screw the four decorative metal legs (G) into the designated corners of the bed frame. Once all parts are assembled, go back and fully tighten all bolts and screws.

Image: Detail of one of the golden metal legs attached to the bed frame.

4. Instrucciones de funcionamiento

Once assembled, your bed frame is ready for use. Place your Queen size mattress directly onto the wooden slats. The integrated mattress anti-displacement device will help keep your mattress in place.

Image: The assembled bed frame with a mattress and bedding, ready for use.

5. Mantenimiento

• Limpieza: For the upholstered parts, gently wipe with a damp cloth and mild soap if necessary. Avoid harsh chemicals. For wooden and metal parts, wipe with a dry or slightly damp paño.
• Comprobación de estanqueidad: Periodically check all bolts and screws to ensure they remain tight. Retighten as needed to maintain stability.
• Evite la sobrecarga: Do not exceed the recommended weight capacity of the bed frame (up to 800 pounds).
• Exposición a la luz solar: Avoid prolonged direct sunlight exposure to prevent fading of the upholstery.

6. Solución de problemas

7. Especificaciones

• Tipo de producto: Estructura de cama de plataforma tapizada
• Modelo: HRTTRRXES
• Tamaño: Reina
• Color: Gris claro
• Altura del cabecero: 56 pulgadas
• Overall Assembled Dimensions (L x W x H): 84.65" x 63.80" x 56.00"
• Slats Material: Pinar
• Material del marco: Solid Pine, Metal, Faux Leather Upholstery
• Capacidad de peso: Hasta 800 libras
• Requiere ensamblaje: Sí

Image: Detailed dimensions of the Queen size bed frame.

8. Garantía y soporte

For warranty information, missing parts, or technical support, please refer to the documentation included with your purchase or contact the manufacturer directly. Keep your purchase receipt for warranty claims.

Fabricante: Genérico