Vetroo 850W 80 Plus Gold Full Modular ATX 3.1 Power Supply User Manual

1. Introducción

This manual provides essential information for the installation, operation, and maintenance of your new Vetroo 850W 80 Plus Gold Full Modular ATX 3.1 Power Supply. Please read this manual thoroughly before installation and keep it for future reference.

Figure 1: Vetroo 850W Power Supply (White)

2. Características del producto

• Compatible con PCIe Gen 5.1: Meets the latest PCIE 5.1 standards for improved performance and efficiency. Backward compatible with both PCIE 4.0 and 3.0.
• Fully ATX 3.1 Compliant: Designed to meet the newest, most advanced power supply standards.
• Premium 105°C Capacitors: High-quality materials and construction ensure stable, low-temperature operation.
• Certificación 80 Plus Gold: Meets high standards for quality and efficiency, ensuring reliable performance and energy savings.
• Diseño totalmente modular: Allows for easy cable management and customization, reducing cable clutter by only installing necessary cables.
• Funcionamiento silencioso: Features a 120mm FDB (Fluid Dynamic Bearing) fan for quiet cooling.

Figura 2: Sobreview of Vetroo 850W Power Supply features

3. Contenido del paquete

Verifique que todos los componentes estén presentes en el paquete:

• Vetroo 850W Power Supply Unit
• Modular Cable Set (including 24-pin ATX, CPU, PCIe, SATA, Molex, FDD connectors)
• Cable de alimentación de CA
• Tornillos de montaje
• Bridas para gestión de cables
• Storage Bag for Unused Cables

Figure 3: Included Modular Cables

4. Información de seguridad

WARNING: Improper installation or use can result in serious injury or damage to your system.

• Always disconnect the AC power cord from the wall outlet before installing or removing the power supply.
• No abra la fuente de alimentación. Alto volumen.tagEstán presentes en el interior, incluso cuando están desconectados.
• Ensure all cables are securely plugged into their respective ports. Loose connections can cause damage.
• Use only the modular cables provided with this power supply. Third-party cables may not be compatible and could cause serious damage.
• Install the power supply in a well-ventilated area, away from high humidity and extreme temperatures.

5. Configuración e instalación

Follow these general steps for installing your power supply. Refer to your PC case and motherboard manuals for specific instructions.

1. Prepare su sistema: Asegúrese de que su computadora esté apagada y desconectada del tomacorriente de pared.
2. Monte la fuente de alimentación: Secure the power supply unit into the designated bay in your PC case using the provided mounting screws.
3. Conecte los cables de alimentación principales: Conecte el cable ATX de 24 pines a su placa base.
4. Conecte los cables de alimentación de la CPU: Conecte el/los cable(s) de alimentación de la CPU de 8 pines (4+4) a su placa base.
5. Conecte los cables de alimentación PCIe: Connect the necessary PCIe power cables (e.g., 12V-2x6 for PCIe 5.1 GPUs, or 8-pin (6+2) for older GPUs) to your graphics card(s).
   

   Figure 4: Dual PCIe 5.1 Connectors

6. Conectar cables periféricos: Connect SATA, Molex, and FDD cables to your storage drives and other peripherals as needed.
7. Sistema de organización de cables: Utilize the fully modular design and included cable ties to route cables neatly, improving airflow and aesthetics.
8. Comprobación final: Double-check all connections to ensure they are secure before closing your PC case.

6. Instrucciones de funcionamiento

After successful installation, you can power on your system.

• Encendido: Connect the AC power cord to the power supply and a wall outlet. Flip the main power switch on the power supply to the 'ON' position.
• Modo ecologico: The power supply features an ECO mode switch. When 'ON', the fan will stop spinning unless the load is above approximately 50% of the rated capacity, ensuring silent operation at low loads. When 'OFF', the fan will spin continuously.

Figure 5: Power Switch and ECO Mode

7. Mantenimiento

Un mantenimiento adecuado garantiza la longevidad y el rendimiento óptimo de su fuente de alimentación.

• Limpieza: Periodically clean the exterior of the power supply and the fan grille to prevent dust buildup, which can impede airflow and cooling. Use compressed air or a soft brush. Ensure the power supply is off and unplugged before cleaning.
• Operación del ventilador: The 120mm Fluid Dynamic Bearing fan is designed for durability and quiet operation. In ECO mode, the fan may not spin at low loads; this is normal.

8. Solución de problemas

Si tiene problemas con su fuente de alimentación, considere lo siguiente:

• Sin energía: Ensure the AC power cord is securely connected to both the power supply and the wall outlet. Verify the main power switch on the power supply is in the 'ON' position. Check your wall outlet with another device.
• Inestabilidad/apagados del sistema: This power supply includes multiple protection features (OVP, OCP, OPP, SCP, UVP, OTP) to safeguard your components. If your system is unstable or shuts down unexpectedly, it could indicate an issue with power delivery or another component. Ensure all power connections are firm.
• El ventilador no gira: If the ECO mode is enabled, the fan will not spin until the power supply reaches approximately 50% load. This is normal operation for quiet performance. If the fan does not spin under heavy load, contact support.
• Ruidos inusuales: If you hear unusual noises (e.g., coil whine, grinding), power down your system immediately and contact support.

9. Especificaciones

10. Garantía y soporte

The Vetroo 850W Power Supply comes with a Garantía de 10 años, ensuring long-term reliability and peace of mind. For technical support, warranty claims, or any questions regarding your product, please visit the official Vetroo websitio o comuníquese con su departamento de servicio al cliente.