1. Introducción
Gracias por la compraasing the suptek ML8 Gas Spring Monitor Arm Stand. This manual provides detailed instructions for safe installation, operation, and maintenance of your monitor arm. Please read this manual thoroughly before use and keep it for future reference.
2. Información de seguridad
- Asegúrese de que todas las piezas estén presentes y sin daños antes del montaje. No utilice el producto si alguna pieza falta o está defectuosa.
- Do not exceed the maximum load capacity of 10KG (22 lbs).
- Ensure your monitor is compatible with VESA standards 50x50mm, 75x75mm, or 100x100mm.
- Mantenga alejados a los niños y las mascotas durante el montaje.
- Always use two people for heavy lifting or when attaching the monitor to the arm.
- Adjust gas spring tension SOLO DESPUÉS the monitor is mounted. Failure to do so may result in the arm springing up unexpectedly.
3. Contenido del paquete
Verify that all components are included in your package. If any parts are missing or damaged, please contact customer service.
Descripción del vídeo: This video demonstrates the unboxing and lists the components included in the suptek ML8 monitor arm stand package, followed by a step-by-step assembly guide.
The package includes the monitor arm, wooden base, VESA plate, various screws, washers, and Allen wrenches for assembly. A Japanese instruction manual is also provided.
4. Instrucciones de configuración
Follow these steps to assemble and install your suptek ML8 monitor arm stand.
4.1. Attach Arm to Base
- Carefully insert the monitor arm into the designated slot on the wooden base.
- Secure the arm to the base using the provided screws and Allen wrench. Ensure all screws are tightened securely.
- Before proceeding, gently push the arm down to release any initial gas spring tension. Remove the velcro strap.
Descripción de la imagen: This image illustrates the gas pressure adjustment mechanism on the monitor arm. It shows how to turn a screw with an Allen wrench to adjust the tension, with '+' and '-' indicators for increasing o decreasing de presión.
4.2. Fijar la placa VESA al monitor
- Align the VESA mounting plate with the mounting holes on the back of your monitor.
- Use the appropriate screws (M4 or M5, depending on your monitor) and washers to secure the VESA plate to the monitor. Tighten firmly but do not overtighten.
4.3. Montar el monitor en el brazo
- With assistance, carefully lift the monitor (with the VESA plate attached) and slide it onto the arm's mounting head.
- Ensure the monitor is securely seated on the arm. Use the provided screw to lock the VESA plate onto the arm's head.
Descripción de la imagen: This image compares the suptek ML8's desk-standing base, which requires no drilling, with traditional clamp-style monitor mounts that may not be suitable for desks with drawers, baffles, or underframes.
The suptek ML8 features a stable wooden base, eliminating the need for drilling holes in your desk or wall. This makes installation simple and suitable for various desk types.
5. Instrucciones de funcionamiento
The ML8 monitor arm offers extensive adjustability for optimal viewing comfort and increased productivity.
5.1. Ajuste de la posición del monitor
- Ajuste de altura: The gas spring mechanism allows for one-touch stepless height adjustment. Gently push or pull the monitor to your desired height.
- Ajuste del ángulo: The innovative multi-axis design allows the screen to be adjusted up 80°, down 80°, left/right 180°, and rotated 360°. This wide range of motion helps reduce eye strain and improves work efficiency.
- Girar: Swivel the monitor up to 180° left or right.
- Rotación: Gire el monitor 360° para orientación vertical u horizontal viewEn.
Descripción de la imagen: This image highlights the flexibility of the suptek ML8 monitor arm, demonstrating its tilt (±90°), swivel (180°), and rotation (360°) capabilities, along with height adjustment range.
Descripción del vídeo: This video demonstrates the various adjustments of the suptek ML8 monitor arm, including height, tilt, swivel, and rotation, showcasing sus beneficios ergonómicos.
5.2. Gestión de cables
The monitor arm includes a cable guide to help keep your desk tidy and organized. Route your monitor cables through the integrated cable management system along the arm.
Descripción de la imagen: This image displays the monitor arm with cables neatly routed through its integrated cable management system, contributing to a clean and organized workspace.
5.3. Device Storage Slot
The wooden base features a multi-functional slot designed to hold smartphones, tablets, pens, or sticky notes. This helps keep your workspace clear and your devices conveniently accessible.
Descripción de la imagen: This image illustrates the multi-functional slot on the wooden base of the monitor arm, designed to hold small devices like smartphones or tablets, keeping them organized on the desk.
6. Mantenimiento
- Limpieza: The wooden base is water-resistant. In case of spills, simply wipe with a soft, damp paño. Evite los limpiadores abrasivos.
- Inspección: Revise periódicamente todos los tornillos y conexiones para asegurarse de que estén bien apretados. Vuelva a apretarlos si es necesario.
- Resorte de gas: The gas spring is designed for long-term use and generally requires no maintenance. If you notice a change in tension, refer to the gas pressure adjustment section in troubleshooting.
7. Solución de problemas
7.1. Monitor Does Not Stay in Desired Position (Gas Pressure Adjustment)
The gas spring tension needs to be adjusted to match the weight of your monitor. This adjustment should only be performed después the monitor is mounted.
- After hanging the monitor, push the monitor down with one hand until the arm is horizontal.
- If the monitor sags or falls: Turn the screw (located on the arm, as shown in the setup image) counter-clockwise (in the + direction) little by little to increase tension.
- If the monitor rises or springs up: Turn the screw clockwise (in the - direction) little by little to decrease tension.
- Adjust gradually until the monitor stays in place when released.
7.2. Piezas faltantes
If any necessary parts are missing from your package, please contact customer service immediately for assistance.
8. Especificaciones
| Número de modelo | ML8 |
| Compatibilidad de tamaño de pantalla | 17-32 pulgadas |
| Compatibilidad VESA | 50x50mm, 75x75mm, 100x100mm |
| Capacidad de carga | 1-10 kg (2.2-22 libras) |
| Tipo de montaje | Montaje de sobremesa (independiente) |
| Material | Wood (Base), Metal (Arm) |
| Color | Negro |
| Ajustes | Height, Tilt (±80°), Swivel (180°), Rotation (360°) |
| Dimensiones de la base | Width: 33cm (11.81in), Length: 53.5cm (21in) |
Descripción de la imagen: This image provides key specifications including weight capacity (22 lbs), compatible screen sizes (17-32 inches), VESA compatibility (75x75mm, 100x100mm), and base dimensions (33cm width, 53.5cm length).
9. Garantía y soporte
The suptek ML8 Gas Spring Monitor Arm Stand comes with a 1 año de garantía a partir de la fecha de compra.
For warranty claims, technical support, or if you have any questions regarding your product, please contact suptek customer service through the retailer where you purchased the product or visit the official suptek websitio para información de contacto.