Introducción
Thank you for choosing the ASD 8 Inch LED Indoor Wall Sconce. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image: The ASD 8 Inch LED Indoor Wall Sconce, showcasing its modern design and matte black finish.
Información de seguridad
Para reducir el riesgo de muerte, lesiones personales o daños a la propiedad por incendio, descarga eléctrica, caída de piezas, cortes/abrasiones y otros peligros, lea todas las advertencias e instrucciones incluidas en la caja del dispositivo y en todas las etiquetas del dispositivo.
- La instalación debe ser realizada por un electricista calificado de acuerdo con el Código Eléctrico Nacional y los códigos locales.
- Siempre apague la energía en el disyuntor antes de realizar la instalación, el retiro o el mantenimiento.
- Asegúrese de que todas las conexiones eléctricas estén seguras y adecuadamente aisladas.
- Do not install in wet locations. This fixture is rated for damp ubicaciones solamente.
- No modifique el accesorio ni lo utilice para fines distintos a su uso previsto.
Características del producto
The ASD LED Indoor Wall Sconce is designed with advanced features for optimal performance and aesthetic appeal:
- Diseño moderno: Combines stylish aesthetics with efficient lighting, featuring a durable housing resistant to rust and impact.
- Color Selectable (5CCT): Offers five color temperature options (2700K Soft White, 3000K Warm White, 3500K Neutral White, 4000K Cool White, 5000K Daylight) adjustable via a simple switch.
- Regulable: Smooth Triac dimming from 10% to 100% allows for adjustable brightness and energy saving. Compatible with modern LED dimmers.
- Acrylic Lens: Provides a 215° beam angle for perfectly even light distribution.
- Damp Locations Rated: Suitable for use in areas with moderate moisture.
Image: Visual representation of the sconce's key features, including its durable housing and acrylic lens.
Instrucciones de instalación
Follow these steps for proper installation of your wall sconce. Ensure power is OFF at the circuit breaker before starting.
- Preparar el accesorio: Desatornille los dos tornillos del accesorio de ambos lados del aplique de pared. Retire la placa de montaje y fíjela a la caja eléctrica existente usando dos tornillos de montaje.
- Seleccionar temperatura de color: Before connecting wires, choose your preferred color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by adjusting the switch position located on the fixture.
- Conectar cables: Connect the wires: Black to Black, White to White, and Green to Green (ground). Secure each connection with wire nuts.
- Accesorio de montaje: Fix the wall sconce to the mounting plate using the two fixture screws on both sides. Before tightening the screws, align the holes of both the fixture and the mounting plate to ensure a solid fit.
Image: Detailed visual guide for the installation process of the wall sconce.
Instrucciones de funcionamiento
Selección de temperatura de color
The wall sconce features a 5CCT (Correlated Color Temperature) switch, allowing you to select from five different light temperatures to suit your preference or room ambiance. This switch is located on the fixture and should be set during installation before final mounting.
- 2700K: Soft White, ideal for a warm, cozy atmosphere.
- 3000K: Warm White, slightly brighter than soft white, good for living spaces.
- 3500K: Neutral White, a balanced white light suitable for most general applications.
- 4000K: Cool White, a brighter, more invigorating light, often used in kitchens or offices.
- 5000K: Daylight, a very bright, crisp white light, mimicking natural daylight.
Image: Visual guide to the five selectable color temperature options.
Función de atenuación
This fixture is designed for smooth Triac dimming, allowing you to adjust the light output from 10% to 100%. To utilize this feature, ensure you are using a compatible LED dimmer switch (not included) with your electrical system.
Image: Illustration of the seamless dimming capability of the sconce.
Mantenimiento
The ASD LED Indoor Wall Sconce requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:
- Limpieza: Turn off power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the fixture. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic lens.
- Inspección: Revise periódicamente si hay conexiones sueltas o signos de desgaste. Si encuentra algún problema, consulte a un electricista cualificado.
- Longevidad del LED: The integrated LED light source is designed for a long lifespan (up to 54,000 hours). It is not user-replaceable.
Solución de problemas
If you experience issues with your wall sconce, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | No hay energía en el dispositivo. Conexión de cable floja. Interruptor o regulador de intensidad defectuoso. | Revise el disyuntor. Verifique que todas las conexiones de cables estén seguras (asegúrese de que la energía esté apagada). Test switch/dimmer or replace if necessary. |
| La luz parpadea o se atenúa de manera inconsistente. | Interruptor de regulación incompatible. Conexión de cable floja. Circuito sobrecargado. | Ensure dimmer is LED compatible (Triac). Compruebe las conexiones de los cables. Reduzca la carga en el circuito o consulte a un electricista. |
| La salida de luz es demasiado baja o demasiado alta. | Ajuste del regulador de intensidad. Incorrect color temperature selected. | Adjust dimmer to desired brightness. Verify the 5CCT switch is set to the preferred color temperature. |
| El accesorio está caliente al tacto. | Funcionamiento normal (los LED generan algo de calor). Ventilación inadecuada. | Ensure fixture is installed in an open area with adequate airflow. If excessively hot, turn off power and consult an electrician. |
Especificaciones del producto
Image: Detailed product specifications including dimensions and electrical ratings.
| Especificación | Detalle |
|---|---|
| Marca | TEA |
| Nombre del modelo | LWS-12 |
| Número de modelo del artículo | A-LWS12-8D10AC-BK |
| Color | 8 Inch - Matte Black |
| Material | Durable Alloy Aluminum, Frosted Acrylic Glass |
| Estilo | Contemporáneo |
| Dimensiones del producto (L x An x Al) | 4.75" x 1.8" x 8.69" (120 mm x 47 mm x 220 mm) |
| Peso del artículo | 1.43 libras |
| Fuente de poder | Cableado |
| Volumentage | 120 voltios |
| Quétage | 10 vatios |
| Brillo | 611 lúmenes |
| Color claro | Adjustable (2700K, 3000K, 3500K, 4000K, 5000K) |
| Índice de reproducción cromática (IRC) | 80.00 |
| Vida media | 54,000 horas |
| Uso en interiores y exteriores | Uso en interiores únicamente |
| Nivel de resistencia al agua | Not Water Resistant (Damp Locations Rated) |
| Código Postal | 810128118071 |
Garantía y soporte
El TEA proporciona una Garantía limitada de 5 años for this product, ensuring top quality and safety. This warranty covers defects in materials and workmanship under normal use and service.
Image: ASD product quality assurance and warranty information.
For warranty claims, technical assistance, or any questions regarding your ASD LED Indoor Wall Sconce, please contact ASD customer service. Refer to your purchase documentation for specific contact details or visit the official ASD websitio.