elicent Caldo Turbo 2000 with Timer

Elicent Logo

ELICENT Caldo Turbo 2000 Convector Heater

Manual de usuario

Introducción

Thank you for choosing the ELICENT Caldo Turbo 2000 Convector Heater with Timer. This natural convection heater is designed to provide efficient and comfortable heating for spaces up to 20m². It features a turbo function for direct heat distribution, precise temperature control, an anti-freeze function, and a programmable timer for customized operation. This manual provides essential information for the safe and effective use of your new heater, including setup, operation, maintenance, and troubleshooting.

ELICENT Caldo Turbo 2000 Convector Heater

Imagen: Frente view of the ELICENT Caldo Turbo 2000 Convector Heater, showing its white painted sheet metal body and grilles.

Información importante de seguridad

Lea atentamente todas las advertencias e instrucciones de seguridad antes de usar este aparato para evitar lesiones personales o daños materiales. Conserve este manual para futuras consultas.

  • Seguridad eléctrica: Asegúrese del volumentagLa etiqueta de potencia indicada en la etiqueta coincide con la de su red eléctrica. No utilice el calefactor si el cable o el enchufe están dañados. No sumerja el calefactor en agua ni en ningún otro líquido.
  • Colocación: Always place the heater on a firm, level surface. Maintain a safe distance from walls, furniture, curtains, and other flammable materials (minimum 1 meter). Do not cover the heater.
  • Entorno de uso: This heater is designed for indoor use only. Do not use in bathrooms, laundry areas, or similar wet locations. Avoid using in areas where gasoline, paint, or flammable liquids are stored.
  • Niños y mascotas: Keep children and pets away from the heater. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless supervised.
  • Protección contra sobrecalentamiento: The heater is equipped with an overheating protection system. If it overheats, it will automatically shut off. Unplug the heater and allow it to cool down before restarting.
  • Mantenimiento: Unplug the heater before cleaning or performing any maintenance. Do not attempt to repair the heater yourself; contact qualified service personnel.

Contenido del paquete

Verifique que todos los artículos estén presentes y en buen estado:

  • ELICENT Caldo Turbo 2000 Convector Heater
  • Feet for floor standing (2 units)
  • Mounting kit for wall installation (screws, wall plugs)
  • Manual de usuario

Configuración

The ELICENT Caldo Turbo 2000 can be used as a floor-standing unit or mounted on a wall.

A. Floor Standing Installation

  1. Desembale con cuidado el calentador y todos los accesorios.
  2. Turn the heater upside down on a soft, non-abrasive surface to avoid scratching the finish.
  3. Attach the two feet to the base of the heater using the provided screws. Ensure they are securely fastened.
  4. Coloque el calentador en posición vertical sobre una superficie estable y nivelada, asegurándose de que haya suficiente espacio libre respecto de las paredes y los muebles.
ELICENT Caldo Turbo 2000 in a living room

Image: The ELICENT Caldo Turbo 2000 Convector Heater placed on the floor in a modern living room, demonstrating its typical usage environment.

B. Wall Mounting Installation

For wall mounting, use the included mounting kit. It is recommended to have this installation performed by a qualified professional to ensure safety and proper mounting.

  1. Elija una ubicación de pared adecuada, asegurándose de que esté alejada de materiales inflamables y tenga una toma de corriente cerca.
  2. Mark the drilling points on the wall according to the heater's mounting brackets.
  3. Perfore agujeros e inserte los tacos.
  4. Fije los soportes de montaje a la pared utilizando los tornillos proporcionados.
  5. Carefully hang the heater onto the mounted brackets, ensuring it is securely fixed.

Instrucciones de funcionamiento

Familiarize yourself with the controls before operating the heater.

A. Configuración de energía

The heater offers three power settings to suit your heating needs:

  • 750W: Low heat setting for smaller spaces or maintaining warmth.
  • 1250W: Medium heat setting for general use.
  • 2000W: High heat setting for rapid heating of larger spaces (up to 20m²).

Select the desired power level using the power selector switch, typically located on the side or front panel.

B. Control del termostato

The adjustable thermostat allows you to set your desired room temperature. The heater will cycle on and off to maintain this temperature.

  1. Gire la perilla del termostato en el sentido de las agujas del reloj para aumentar la temperatura deseada.
  2. Gire la perilla del termostato en sentido antihorario para disminuir la temperatura deseada.
  3. For continuous heating, set the thermostat to its maximum setting.

C. Función de temporizador

The integrated timer allows you to program the heater to turn on or off at specific times, adapting to your schedule.

  • Refer to the specific timer instructions on the heater's control panel for detailed programming steps.
  • Typically, you will set the current time and then program the desired ON/OFF periods using the timer segments or buttons.

D. Anti-Freeze Function

This function is designed to prevent the room temperature from dropping below freezing (approximately 5°C / 41°F). When activated, the heater will automatically turn on if the room temperature falls below this threshold, providing protection against frost.

  • To activate, set the thermostat to the snowflake or minimum setting.

E. Turbo Function

The turbo function enhances heat distribution by directing warm air forward, allowing for quicker and more direct heating of the immediate area.

  • Activate the turbo function using the dedicated switch or button on the control panel.

Mantenimiento

La limpieza y el mantenimiento regulares garantizarán la longevidad y el funcionamiento eficiente de su calentador.

  • Antes de limpiar: Desenchufe siempre el calentador de la toma de corriente y deje que se enfríe completamente antes de limpiarlo.
  • Limpieza exterior: Limpie las superficies exteriores con un paño suave, damp Paño. No utilice limpiadores abrasivos, disolventes ni productos químicos agresivos, ya que pueden dañar el acabado.
  • Eliminación de polvo: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and outlet grilles. This helps maintain optimal airflow and prevents overheating.
  • Almacenamiento: If storing the heater for an extended period, clean it thoroughly, then store it in its original packaging or a dry, dust-free location.
  • Sin servicio interno: There are no user-serviceable parts inside the heater. Do not attempt to open or repair the unit yourself.

Solución de problemas

If you experience issues with your heater, consult the following table before contacting support.

ProblemaPosible causaSolución
El calentador no enciende.Not plugged in; power outlet not working; power switch off; thermostat set too low; overheating protection activated.Ensure plug is fully inserted; test outlet with another appliance; turn power switch ON; increase thermostat setting; unplug and let cool for 30 minutes.
El calentador no produce calor o produce calor insuficiente.Thermostat set too low; incorrect power setting; room too large for heater capacity; air inlets/outlets blocked.Increase thermostat setting; select higher power setting (2000W); ensure heater is appropriate for room size; clear any obstructions from grilles.
El calentador se enciende y apaga con frecuencia.Thermostat setting is too close to ambient room temperature; heater is placed near a draft.Adjust thermostat setting slightly higher; relocate heater away from drafts.
Olor o ruido inusual.New unit (initial burning off of manufacturing residues); dust accumulation; internal fault.Initial smell is normal and will dissipate; clean heater thoroughly; if persistent or loud, discontinue use and contact support.

Presupuesto

CaracterísticaDetalle
ModeloCaldo Turbo 2000 with Timer
MarcaELICENT
TipoNatural Convection Heater
Configuración de energía750 W / 1250 W / 2000 W
Volumentage220 voltios
Heated Surface AreaHasta 20 m²
Características especialesProgrammable Thermostat, Anti-freeze Function, Turbo Function
Opciones de instalaciónFloor Standing (with feet) or Wall Mounted (with kit)
MaterialPainted Sheet Metal Body
ColorBlanco
Dimensiones (embalaje)62 x 43.3 x 14 cm
Peso del artículo3 kilogramos

Garantía y soporte

ELICENT products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official ELICENT websitio.

For technical support, spare parts, or service inquiries, please contact ELICENT customer service or visit their official brand store:

Visit the ELICENT Brand Store

Image: A woman with closed eyes, enjoying fresh air under a blue sky, symbolizing the brand's focus on air quality and well-being.

Elicent Brand Story Image

© 2024 ELICENT. Todos los derechos reservados.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.