BN-LINK Sprinkler Timer Outdoor - 2 Zone Manual

1. Introducción

The BN-LINK Sprinkler Timer Outdoor is designed to automate your lawn and garden irrigation, offering convenience and water-saving features. This manual provides comprehensive instructions for setting up, operating, and maintaining your 2-zone programmable water timer.

Figure 1: BN-LINK 2-Zone Sprinkler Timer, front view showing the large LCD display and control dial.

2. Configuración e instalación

2.1 Instalación de la batería

The timer requires 2 AA batteries for operation. These batteries are typically included with your purchase.

1. Localice el compartimento de la batería en la parte posterior del temporizador.
2. Abra la tapa de la batería.
3. Inserte 2 pilas AA, asegurándose de la polaridad correcta (+/-).
4. Cierre bien la tapa de la batería para mantener el sello impermeable.

Figura 2: Posterior view of the timer showing the battery compartment and overall dimensions.

2.2 Conexión al grifo

The timer is compatible with standard 3/4-inch hose threads.

1. Asegúrese de que el grifo esté cerrado.
2. Inspect the timer's inlet for the included washer. If missing, insert a new washer to prevent leaks.
3. For optimal seal, apply a small amount of Teflon tape (often included) to the faucet threads before attaching the timer.
4. Screw the timer onto your outdoor faucet by hand until snug. Do not overtighten.
5. Attach your garden hoses or irrigation lines to the two outlets at the bottom of the timer.

Figure 3: Timer installed on an outdoor faucet, demonstrating hose connections.

2.3 Configuración de la hora actual

Before programming, set the current time on the timer.

1. Turn the control dial to "SET CLOCK".
2. Use the "+" and "-" buttons to adjust the current time. The timer supports both 12-hour and 24-hour formats.
3. Press "OK" to confirm the time and move to the next setting.

3. Instrucciones de funcionamiento

The BN-LINK Sprinkler Timer features dual-zone independent programming, allowing you to customize watering schedules for two separate areas.

3.1 Programming Automatic Watering (Per Zone)

Each zone (Zone 1 and Zone 2) can be programmed independently.

1. Turn the control dial to "START TIME". Use the "ZONE" button to select either Zone 1 or Zone 2. Adjust the desired start time using "+" and "-" buttons, then press "OK".
2. Turn the control dial to "HOW LONG". Select the zone and set the watering duration from 1 minute to 11 hours 59 minutes using "+" and "-" buttons. Press "OK".
3. Turn the control dial to "HOW OFTEN". Select the zone and set the watering frequency from every 1 to 12 hours, or 1 to 7 days. Press "OK".
4. Once programming is complete, turn the control dial to "ON" to activate the schedule.

Figure 4: Display illustrating options for setting start time, duration, and frequency.

Figure 5: Visual representation of independent programming for Zone 1 and Zone 2.

Figura 6: detallada view of Hour Cycle Mode and Day Cycle Mode programming options.

3.2 Función de retraso por lluvia

The rain delay function helps conserve water by pausing scheduled watering during rainy conditions.

1. Turn the control dial to "ON".
2. Press and hold the "DELAY" button for 3-5 seconds. The display will show "24H".
3. Use the "+" or "-" buttons to adjust the delay duration (e.g., 24, 48, or 72 hours).
4. Press "OK" to confirm the delay. The timer will automatically resume its schedule after the set delay period.
5. To cancel the rain delay manually, press and hold the "DELAY" button again for 3-5 seconds.

Figure 7: Timer display indicating the rain delay feature and duration options.

3.3 Riego manual

Para riego inmediato fuera del horario programado:

1. Turn the control dial to "ON".
2. Pulse el botón “MANUAL”.
3. Use the "+" and "-" buttons to set the desired manual watering duration.
4. Pulse “OK” para iniciar el riego manual.
5. To stop manual watering, press "MANUAL" again or turn the dial to "OFF".

4. Mantenimiento

4.1 Cuidados generales

The timer is designed with an IP54 waterproof rating, anti-UV coating, and anti-rust material for durability in outdoor conditions.

• Regularly check the timer for any debris or mineral buildup around the connections and clean as needed.
• Asegúrese de que el compartimento de la batería permanezca sellado para evitar la entrada de agua.
• During freezing temperatures, remove the timer from the faucet and store it indoors to prevent damage from ice expansion.

Figure 8: Illustration of the timer's robust construction for outdoor use.

4.2 Advertencia de batería baja

The large LCD display includes a battery indicator. When the battery level is low, replace the AA batteries promptly to ensure continuous operation and prevent program loss.

5. Solución de problemas

6. Especificaciones

• Marca: BN-ENLACE
• Número de modelo: CP-W03
• Color: Negro
• Dimensiones del producto: 1.9" de profundidad x 2.6" de ancho x 4.3" de alto
• Peso del artículo: 13.4 onzas
• Número de configuraciones: 5 (Set Clock, Start Time, How Long, How Often, ON/OFF)
• Rango de presión del agua: 0.5bar to 8bar (7-116PSI)
• Hose Thread Compatibility: 3/4 pulgadas
• Fuente de energía: 2 pilas AA (incluidas)
• Clasificación de impermeabilidad: IP54
• Características: Dual-Zone Independent Programming, Rain Delay Function, Large LCD Display, Anti-UV Coating, Anti-Rust Material

7. Garantía y soporte

7.1 Información de garantía

This product typically comes with a 30-day return/replacement policy from the date of purchase. Please refer to your purchase receipt or retailer's policy for specific warranty terms and conditions.

7.2 Atención al cliente

For any questions, technical assistance, or warranty claims, please contact BN-LINK customer support through their official webSitio web o la información de contacto proporcionada con el empaque de su producto. También puede visitar el BN-LINK Store on Amazon Para más información.