Ortur LU2-10A

Ortur LU2-10A 10000mW Laser Module Instruction Manual

Model: LU2-10A

1. Introducción

This manual provides essential information for the safe and effective use of your Ortur LU2-10A 10000mW Laser Module. Please read these instructions carefully before installation and operation. This laser module is designed for high-precision engraving and cutting with Ortur Laser Engravers.

2. Contenido del paquete

Verifique que todos los componentes enumerados a continuación estén presentes en su paquete:

Ortur LU2-10A Laser Module Package List

Imagen: Detallada view of all components included in the Ortur LU2-10A Laser Module package, such as the laser module, laser shield, air assist, various screws, cables, and tools.

  • LU2-10A Laser Module
  • Laser Shield
  • Asistencia de aire
  • Bloque de soporte
  • Control deslizante
  • OUC2.0
  • Small Coupling
  • Adaptador de corriente de 24 V 2 A
  • Dedicated LaserWire
  • Tubo de aire
  • Conector de tubo
  • Normal Adapter Cable
  • Laser Backboard
  • M3x5mm Screws*6 (Used for Slider)
  • Thumb Screws*2
  • M3x8mm Screws*4 (Used for OLM2S2)
  • M3x12mm Screws*4 (Used for OLM2)
  • Brida para cables*10
  • M3 Gasket*1
  • Llave inglesa
  • Lente
  • Regulador de flujo de aire
  • OLM2/S2 OUC Exclusive Adapter Cable

3. Configuración e instalación

This section guides you through the assembly and installation of the LU2-10A Laser Module onto your Ortur Laser Engraver. Ensure the engraver is powered off and disconnected from the power source before beginning installation.

3.1. Vídeo tutorial de instalación

Video: A detailed installation tutorial for the Ortur Laser Master 2 Pro S2 LU2-10A, demonstrating step-by-step assembly and connection procedures.

3.2. Laser Module Installation Steps

  1. Attach the laser module to the engraver's carriage.
  2. Secure the laser module using the provided thumbscrews.
  3. Insert the 5-pin terminal of the dedicated laser line into the laser module's port.
  4. Connect the other end of the laser line to the appropriate port on the engraver's control board.
  5. Install the laser shield onto the laser module to ensure eye protection during operation.
  6. Connect the air assist hose to the air intake port on the laser module and to an external air pump (not included).
Ortur LU2-10A Laser Module installed on engraver, cutting wood

Image: The Ortur LU2-10A Laser Module actively cutting a piece of wood, demonstrating its operational capability.

4. Instrucciones de funcionamiento

The Ortur LU2-10A Laser Module offers powerful and precise capabilities for various materials.

4.1. Características principales

  • Amplia compatibilidad: Compatible with Ortur Laser Master 2, Ortur Laser Master 2 S2, Ortur Laser Master 2Pro S2, and Ortur Laser Master 3 Laser Engravers.
  • Versatilidad del material: Engrave and cut acrylic, metal, wood, stainless steel, glass, ceramics, leather, food, paper, fabric, and more.
  • Salida potente: True 10000mW laser output for effective cutting and engraving.
  • Alta precisión: Compressed spot size of 0.05mm x 0.1mm for detailed work.
  • Alta eficiencia: Lightweight design (235g) allows for engraving speeds up to 15000mm/min.
  • Refrigeración por ventilador doble: Optimized cooling system ensures stable long-term operation without overheating.
  • Operación estable: 24V electrical system and high-quality cables support 24 hours of uninterrupted, consistent engraving.

4.2. Capacidades de grabado y corte

The LU2-10A module is capable of cutting various materials with significant thickness:

  • Up to 30mm acrylic.
  • Up to 20mm wood.
Diagram showing dual laser beams combining for 10W output and 0.05x0.1mm compressed spot

Image: An internal diagram illustrating how two 5.5W laser beams are combined using light combing lenses to achieve a true 10W output with a precise 0.05 x 0.1mm compressed spot.

Ortur LU2-10A Laser Module with air intake and lightweight design

Image: The Ortur LU2-10A Laser Module highlighting its air intake for cooling and its lightweight design (only 235g), contributing to high engraving speeds.

Interno view of Ortur LU2-10A Laser Module showing dual 5.5W lasers

Imagen: Una transparente view of the Ortur LU2-10A Laser Module, showing the internal arrangement of two 5.5W lasers combining to form a single 10W output beam.

Ortur LU2-10A Laser Module with built-in air assist and comparison of cut quality

Image: The Ortur LU2-10A Laser Module featuring its built-in air assist system, with an example showing a cleaner cut (labeled "Ours") compared to a cut without air assist (labeled "Other").

Diagram illustrating the 0.05mm x 0.1mm compressed laser spot for extreme engraving

Image: A visual representation of the laser's compressed spot, showing its dimensions of 0.05mm x 0.1mm, which enables extreme precision in engraving.

5. Mantenimiento

El mantenimiento regular garantiza un rendimiento óptimo y prolonga la vida útil de su módulo láser.

  • Limpieza de lentes: Limpie periódicamente la lente láser con un paño suave que no suelte pelusa y una solución de limpieza de lentes adecuada para evitar la acumulación de residuos que pueden afectar el rendimiento del láser.
  • Boquilla de asistencia de aire: Ensure the air assist nozzle is clear of debris to maintain effective airflow during cutting and engraving.
  • Ventiladores de refrigeración: Check the dual cooling fans for dust accumulation and clean them gently to ensure proper heat dissipation.
  • Inspección de cables: Inspeccione periódicamente todos los cables para detectar signos de desgaste, daños o conexiones sueltas.

6. Solución de problemas

This section addresses common issues you might encounter with your Ortur LU2-10A Laser Module.

ProblemaPosible causaSolución
El láser no dispara o la salida es débil.
  • Conexión de cable suelta.
  • Lente láser sucia.
  • Incorrect power settings in software.
  • Laser module overheating.
  • Check all cable connections, especially the 5-pin laser line.
  • Limpie la lente láser según las instrucciones de mantenimiento.
  • Verify laser power and speed settings in your engraving software.
  • Ensure cooling fans are clear and functioning. Allow module to cool if hot.
Inconsistent engraving/cutting results.
  • Unstable engraver frame.
  • Loose belts or rollers.
  • Material not flat or secured.
  • Enfoque incorrecto.
  • Ensure the engraver frame is stable and all screws are tightened.
  • Check and adjust belt tension and roller tightness.
  • Secure the material firmly to the work surface.
  • Verifique que el enfoque del láser esté configurado correctamente para el espesor del material.
Air assist not functioning.
  • Blocked air assist nozzle.
  • Conexión de la manguera de aire suelta.
  • External air pump issue.
  • Clear any debris from the air assist nozzle.
  • Check all air hose connections for tightness.
  • Ensure your external air pump is powered on and functioning correctly.

7. Especificaciones

CaracterísticaDetalle
Dimensiones del producto4.72 x 1.97 x 1.73 pulgadas
Número de modelo del artículoOrtur-LaserMaster2-ProS2 (LU2-10A variant)
Peso del artículo1.54 libras
Potencia de salida del láser10000 mW (10 W)
Tamaño de punto comprimido0.05 mm x 0.1 mm
Velocidad de grabadoHasta 15000 mm/min
Sistema de enfriamientoRefrigeración por ventilador doble
Sistema eléctrico24 V
CompatibilidadOrtur Laser Master 2, 2 S2, 2Pro S2, 3

8. Garantía y soporte

For warranty information, technical support, or further assistance, please refer to the official Ortur webSitio web o contacte directamente con el servicio de atención al cliente. Conserve su recibo de compra como comprobante.

Official Ortur Websitio: www.ortur.net

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.