Introducción
Thank you for choosing the HORLAT Projector Tripod Stand TP-01. This stand is specifically designed to provide stable and adjustable support for your HORLAT W10/W11 projectors. It features a 180° rotational capability, allowing for flexible projection angles. Please read this manual carefully before use to ensure proper installation and operation.
Note: This product is a projector stand. The projector itself is not included.
Información importante de seguridad
- Asegúrese de que el soporte esté colocado sobre una superficie estable y nivelada para evitar que se vuelque.
- Do not overload the stand beyond its intended capacity. This stand is designed for HORLAT W10/W11 projectors only.
- Keep the stand away from heat sources, direct sunlight, and moisture.
- Do not attempt to modify or disassemble the stand.
- Mantener fuera del alcance de los niños para evitar accidentes.
Contenido del paquete
Por favor revise el paquete para ver los siguientes artículos:
- HORLAT Projector Tripod Stand TP-01
- Adaptador
Note: The term "Adapter" is listed in the product's package contents. This may refer to a specific mounting adapter for the projector.
Producto terminadoview
The HORLAT TP-01 stand is designed for ease of use and stability. It features a sturdy base and a rotatable platform for your projector.
Image: The HORLAT Projector Tripod Stand TP-01, showcasing its sleek design and stable structure.
Image: Diagram illustrating the 90-degree and 45-degree rotation capabilities of the projector stand's platform.
Instrucciones de instalación
- Desembalaje del soporte: Retire con cuidado todos los componentes del embalaje.
- Coloque el soporte: Position the stand on a flat, stable surface where you intend to use your projector. Ensure there is enough space for the projector and its cables.
-
Monte el proyector: Gently place your HORLAT W10 or W11 projector onto the stand's platform. Ensure it is centered and stable.
Image: A HORLAT projector securely placed on the TP-01 stand, demonstrating proper mounting.
- Conectar cables: Connect all necessary power and video cables to your projector. Route cables neatly to avoid obstruction or tripping hazards.
Operación del soporte
The HORLAT TP-01 stand allows for easy adjustment of your projector's position and angle.
-
Ajuste de rotación: The projector platform can be rotated up to 180 degrees. Gently hold the projector and rotate the platform to achieve the desired projection angle. The stand is designed to hold the projector securely at various angles.
Image: Diagram showing the 90-degree rotation capability of the projector stand, allowing for versatile positioning.
- Posicionamiento: Once the desired angle is set, ensure the stand remains stable. The design allows for flexible placement on various surfaces while maintaining stability.
Mantenimiento
- Limpieza: To clean the stand, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
- Almacenamiento: When not in use, store the stand in a cool, dry place, away from direct sunlight and extreme temperatures.
- Inspección: Periodically check the stand for any signs of wear or damage. If any damage is found, discontinue use and contact customer support.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El soporte es inestable. | Uneven surface; projector not centered. | Place the stand on a flat, level surface. Ensure the projector is centered on the platform. |
| Difficulty rotating the platform. | Excessive force applied; obstruction. | Ensure no cables or other objects are obstructing the rotation. Apply gentle, even pressure. Do not force rotation. |
| Stand appears damaged. | Impacto físico; defecto de fabricación. | Discontinue use immediately. Contact HORLAT customer support for assistance. |
Presupuesto
| Característica | Detalle |
|---|---|
| Marca | HORLAT |
| Número de modelo | TP-01 |
| Dispositivos compatibles | HORLAT W10/W11 Projectors |
| Tipo de montaje | Trípode (soporte de escritorio) |
| Característica especial | 180° Rotational Platform |
| Garantía | 1 año de garantía del fabricante |
Garantía y atención al cliente
The HORLAT Projector Tripod Stand TP-01 comes with a 1 año de garantía del fabricanteEsta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso.
For warranty claims, technical support, or any questions regarding your product, please contact HORLAT customer service through the retailer where you purchased the product or visit the official HORLAT websitio para información de contacto.
Please have your model number (TP-01) and proof of purchase ready when contacting support.