Mega Motion MM-7305-MN TRIO TENACITY

Mega Motion MM-7305-MN TRIO TENACITY Lift/Recliner Chair User Manual

Model: MM-7305-MN TRIO TENACITY

1. Introducción

Thank you for choosing the Mega Motion MM-7305-MN TRIO TENACITY Lift/Recliner Chair. This manual provides essential information for the safe and efficient use, setup, operation, and maintenance of your new chair. Please read these instructions thoroughly before using the product and retain them for future reference.

The MM-7305-MN is an extra-large, heavy-duty 3-position power lift and recliner chair designed for comfort and durability, featuring a 500-lb. weight capacity and a whisper-quiet power recline and lift function.

2. Instrucciones de seguridad

ADVERTENCIA: No seguir estas instrucciones de seguridad podría provocar lesiones o daños al producto.

  • Capacidad de peso: No exceda la capacidad máxima de peso de 500 libras (227 kg).
  • Autorización: Ensure adequate clearance around the chair during operation to prevent obstruction or entanglement. Keep children and pets away from moving parts.
  • Cable de alimentación: Always inspect the power cord for damage before use. Do not operate the chair if the cord is frayed or damaged. Plug the chair directly into a wall outlet; avoid using extension cords.
  • Estabilidad: Do not stand on the footrest or armrests. Ensure the chair is placed on a level surface.
  • Respaldo de batería de emergencia: The integrated emergency battery backup is for temporary use during power outages to return the chair to a seated position. It is not intended for continuous operation.
  • Condiciones médicas: Consult a physician before using the lift function if you have any medical conditions that could be aggravated by movement or positioning.

3. Configuración y montaje

The Mega Motion MM-7305-MN chair requires minimal assembly. It is designed for straightforward setup.

  1. Desembalaje: Retire con cuidado todos los componentes del embalaje. Conserve el material de embalaje para posibles futuros transportes o devoluciones.
  2. Colocación: Position the chair on a level, stable surface. Ensure there is at least 18.5 inches (47 cm) of clearance from the wall to allow for full recline.
  3. Conexión de energía: Locate the power cord and plug it securely into a grounded electrical outlet.
  4. Mando a distancia: The remote control is pre-connected. Ensure its cable is not pinched or obstructed.

The chair features an exclusive two-motor lift design, synchronized to prevent tipping and capable of supporting up to 500 lbs. This design ensures smooth and stable operation during both lifting and reclining.

Mega Motion MM-7305-MN TRIO TENACITY Lift/Recliner Chair in upright position

Image 1: The Mega Motion MM-7305-MN TRIO TENACITY Lift/Recliner Chair in its upright, seated position. The remote control is visible on the seat.

4. Instrucciones de funcionamiento

Your lift/recliner chair is operated using the wired remote control.

  • Función de reclinación: Mantenga pulsado el Flecha hacia abajo button on the remote to recline the chair. Release the button when you reach your desired comfort zone. The chair offers three distinct positions.
  • Función de elevación: Mantenga pulsado el Flecha hacia arriba button on the remote to gently lift the chair, assisting you in standing up or exiting the chair. Release the button when the desired height is reached.
  • Puerto USB: The remote control includes a USB port, allowing you to charge your tablet or phone conveniently from the comfort of your recliner.
  • Bolsillos laterales: Utilize the easy-to-reach side pockets on both sides of the chair to store magazines, newspapers, or the remote control.
Mega Motion MM-7305-MN TRIO TENACITY Lift/Recliner Chair in reclined position, showing footrest mechanism

Image 2: The Mega Motion MM-7305-MN TRIO TENACITY Lift/Recliner Chair fully reclined, illustrating the extended footrest and the robust steel lift mechanism.

Close-up of the remote control and extended footrest of the Mega Motion lift chair

Imagen 3: Un detalle view of the remote control with its up and down arrow buttons, alongside the extended chaise pad construction of the footrest.

5. Mantenimiento

Proper care and maintenance will extend the life and performance of your chair.

  • Cuidado de la tela: The chair is upholstered in Darby Fabrics, 100% Polyester-W. For general cleaning, gently vacuum the fabric to remove dust and loose debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild, water-based cleaning solution and a soft cloth, testing on an inconspicuous area first. Do not saturate the fabric.
  • Mecanismo: The heavy-duty steel lift mechanism is designed for durability and typically requires no lubrication. Keep the mechanism free from dust and debris.
  • Cable de alimentación: Inspeccione periódicamente el cable de alimentación y las conexiones para detectar signos de desgaste o daños.
  • Limpieza general: Wipe down non-fabric surfaces with a soft, damp paño. Evite productos químicos agresivos o limpiadores abrasivos.

6. Solución de problemas

If you encounter issues with your chair, refer to the following common troubleshooting steps:

  • La silla no responde:
    - Asegúrese de que el cable de alimentación esté enchufado de forma segura a una toma eléctrica que funcione.
    - Check if the remote control cable is firmly connected to the chair and not damaged.
    - Verify that the wall outlet is receiving power by testing it with another appliance.
  • Chair Moves Slowly or Unevenly:
    - This could indicate a power issue. Ensure the chair is receiving adequate power.
    - Check for any obstructions under or around the chair mechanism.
  • Emergency Battery Backup Not Working:
    - Ensure the batteries (if replaceable) are correctly installed and not depleted. The emergency backup is for temporary use only.
  • Ruidos inusuales:
    - Inspect the chair for any loose components or foreign objects that might be causing the noise. If the noise persists and seems to originate from the mechanism, discontinue use and contact support.

Si estos pasos no resuelven el problema, comuníquese con el servicio de atención al cliente.

7. Especificaciones

CaracterísticaEspecificación
Número de modeloMM-7305-MN TRIO TENACITY
Capacidad de peso500 libras (227 kg)
Recuento de posiciones reclinadas3
Altura de usuario sugerida5'8" To 6' (173 cm to 183 cm)
MaterialDarby Fabrics, 100% Polyester-W
Material del marcoFurniture grade hardwood/plywood construction
Mecanismo de elevaciónHeavy-duty steel, Exclusive Two Motor Lift design
Seat-To-Floor Height19.5" (49.5 cm)
Profundidad del asiento22" (55.9 cm)
Ancho del asiento27" (68.6 cm)
Ancho total39.5" (100.3 cm)
Total Depth (Upright)39" (99.1 cm)
Total Recline Depth67" (170.2 cm)
Overall Lifted Chair Height62" (157.5 cm)
Distancia de la pared18.5" (47 cm)
Componentes incluidosChair, Wired Remote Control
Montaje requeridoNo

8. Garantía y soporte

Para obtener información sobre la garantía o asistencia técnica, consulte la documentación proporcionada al momento de la compra o póngase en contacto con su vendedor. Conserve el recibo de compra como comprobante.

If you require assistance with troubleshooting or have questions not covered in this manual, please reach out to the manufacturer's customer service department or the seller from whom you purchased the chair.

© 2024 Mega Motion. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.