Introducción
The SILCA Ultimate Sealant Syringe Injector is designed for precise and clean application of tubeless tire sealant. This manual provides detailed instructions for its setup, operation, and maintenance to ensure optimal performance and longevity of the product.
Contenido del paquete
Al abrir el paquete, verifique que todos los componentes estén presentes y sin daños.
Image: The SILCA Ultimate Sealant Syringe Injector, including the main syringe body, a flexible hose with a blue connector, and a black valve core removal tool.
- 1 x SILCA Ultimate Sealant Syringe
- 1 x Flexible Hose with Valve Connector
- 1 x Valve Core Removal Tool (black cap)
Configuración
- Prepare el neumático: Ensure the tire is deflated and the valve core is removed. Use the provided valve core removal tool if necessary.
- Attach Hose to Syringe: Securely connect the flexible hose to the tip of the syringe. Ensure a snug fit to prevent leaks.
- Draw Sealant: Insert the open end of the syringe (without the hose) into the sealant bottle. Pull the plunger back slowly to draw the desired amount of sealant into the syringe.
- Eliminar el aire: Hold the syringe upright with the hose attached. Gently push the plunger until any air bubbles are expelled and sealant begins to appear at the tip of the hose.
Instrucciones de funcionamiento
- Conectar al vástago de la válvula: Carefully attach the blue connector end of the flexible hose to the valve stem of the tire. Push firmly to create a seal.
- Inject Sealant: Slowly and steadily push the plunger to inject the sealant into the tire. Avoid rapid injection, which can cause splashing or air pockets.
- Desconectar: Once the desired amount of sealant has been injected, gently pull the hose connector off the valve stem.
- Reinstall Valve Core: Reinsert the valve core into the valve stem and tighten it securely using the valve core removal tool.
- Inflar neumático: Inflate the tire to the recommended pressure. Rotate the wheel to distribute the sealant evenly inside the tire.
Imagen: Un primer plano view demonstrating the flexible hose of the injector securely attached to a bicycle tire valve stem, ready for sealant injection.
Mantenimiento
Proper cleaning after each use is crucial to prevent sealant from drying and clogging the injector.
- Enjuague inmediatamente: As soon as you finish injecting sealant, rinse the syringe and hose thoroughly with water.
- Enjuague con agua: Draw clean water into the syringe and push it through the hose multiple times until the water runs clear.
- Clean Plunger: Remove the plunger from the syringe body and wipe it clean.
- Secado al aire: Deje que todos los componentes se sequen al aire por completo antes de volver a ensamblarlos o guardarlos.
- Almacenamiento: Store the clean, dry injector in a cool, dry place away from direct sunlight.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Sealant not drawing into syringe. | Air lock; plunger not fully extended; sealant too viscous. | Ensure plunger is fully extended. Gently tap syringe to dislodge air. If sealant is too thick, ensure it's at room temperature. |
| Sealant leaking from hose connection. | Hose not securely attached; damaged hose/syringe tip. | Push hose firmly onto syringe tip. Inspect hose and syringe for cracks or damage; replace if necessary. |
| Difficulty injecting sealant. | Clogged hose/syringe; valve core not fully removed. | Clean syringe and hose thoroughly. Ensure valve core is completely removed from the tire valve. |
Presupuesto
- Modelo: B0DWXZJ9LV
- Marca: SILCA
- Dimensiones del paquete: 8.7 x 3.9 x 1.65 pulgadas
- Peso: 2.4 onzas
- Material: Rubber, Plastic (Syringe body and hose)
- Compatible Sealant Materials: Designed for sealants containing rubber, plastic, and carbon fiber particles.
- Nivel de resistencia al agua: Water Resistant (for cleaning purposes)
Garantía y soporte
For warranty information and customer support, please refer to the official SILCA webSitio web o contacte directamente con el servicio de atención al cliente. Conserve su recibo de compra como comprobante.
Fabricante: SILCA