iMaihom 50W Motion Sensor Outdoor Light

Introducción

Thank you for choosing the iMaihom 50W Motion Sensor Outdoor Light. This hardwired LED floodlight provides 5000 lumens of 6500K daylight white light, enhancing security and visibility for your outdoor spaces. Featuring advanced motion detection and a dusk-to-dawn function, this IP65 waterproof light is designed for reliable performance in various weather conditions. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

Información de seguridad

• Siempre apague el interruptor de energía antes de instalar, reparar o limpiar el artefacto.
• Consulte a un electricista calificado si no está seguro acerca del proceso de instalación.
• Asegúrese de que todas las conexiones eléctricas se realicen de acuerdo con los códigos y ordenanzas locales.
• No mire directamente a la fuente de luz LED cuando esté iluminada, ya que puede causar daños en los ojos.
• Este producto está diseñado para uso en exteriores y tiene un grado de impermeabilidad IP65. Sin embargo, asegúrese de que esté bien sellado durante la instalación para mantener la resistencia al agua.
• Do not attempt to disassemble or modify the fixture, as this will void the warranty and may pose a safety risk.

Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar la instalación:

• iMaihom 50W Motion Sensor Outdoor Light (1 unit)
• Soporte de montaje (1 unidad)
• Tuercas para cables (2 unidades)
• Screws and Expansion Rubber Plugs (various quantities for mounting)
• Junta (1 unidad)
• Manual de instrucciones (este documento)

Figura 1: Lista de piezas incluidas

Características del producto

• Iluminación brillante: Emits 5000 lumens of 6500K daylight white light for extensive coverage.
• Detección de movimiento avanzada: Features a 180-degree detection angle and a 19–72 ft range, with adjustable lighting duration from 1–10 minutes.
• Dusk to Dawn Function: Built-in light sensor automatically turns the floodlight ON at dusk and OFF at dawn.
• Resistente al agua IP65: Designed to withstand harsh weather conditions, ensuring year-round reliability.
• Fácil instalación: Simple 3-step hardwired installation process.
• Cabezales ajustables: Three light heads are 360° adjustable to direct light where needed.

Configuración e instalación

Before installation, ensure the power supply is turned off at the circuit breaker to prevent electrical shock.

1. Retire el accesorio antiguo (si corresponde): Carefully disconnect and remove any existing light fixture from the junction box.
2. Instale el soporte de montaje: Fije el soporte de montaje suministrado a la caja de conexiones con los tornillos adecuados. Asegúrese de que esté firmemente fijado.
3. Conectar el cableado: Connect the wires from the new iMaihom light to the household wiring using the included wire nuts. Match colors: black to black (hot), white to white (neutral), and green to ground (bare copper). Wrap electrical tape around wire nuts for added security.
4. Montar la luz: Align the light fixture with the mounting bracket and secure it with the long machine screw provided. Ensure the gasket is properly seated between the fixture and the mounting surface to prevent water intrusion.
5. Ajuste de los cabezales de luz: Loosen the Phillips screw on the main head to adjust its angle. The side LED heads can also be articulated to direct light as desired.

Figure 2: Hardwired Installation Steps

Figure 3: Wall Mounted and Soffit Mounted Options

Instrucciones de funcionamiento

The iMaihom motion sensor light offers multiple operating modes and adjustable settings located on the bottom of the motion sensor unit.

Diales de control:

• TEST Mode (Left Dial): Used for initial setup and testing. In this mode, the light will turn on for 5 seconds when motion is detected, regardless of ambient light.
• TIME (Middle Dial): Ajusta la duración que la luz permanece encendida después de detectar movimiento, desde 10 segundos a 10 minutos.
• SENSITIVITY (Right Dial): Controls the detection range of the motion sensor (L: 19-26.2ft, M: 26.2-39.3ft, H: 39.3-72ft). Adjust this to prevent false triggers from small animals or distant objects.

Modos de funcionamiento:

• Modo de sensor de movimiento: The light activates only when motion is detected in dark conditions. The duration and sensitivity are set by the TIME and SENSITIVITY dials.
• Modo del anochecer al amanecer (D2D): The built-in photocell sensor automatically turns the light ON when ambient light levels fall below a certain threshold (dusk) and OFF when light levels rise (dawn). Motion detection is typically overridden or integrated based on specific settings.

Figure 4: Control Dials for Settings

Figure 5: Dusk to Dawn Mode Operation

Mantenimiento

• Limpieza: Limpie el accesorio con un paño suave y seco.amp Paño. No utilice limpiadores abrasivos ni disolventes.
• Inspección: Inspeccione periódicamente el accesorio para detectar cualquier signo de daño, conexiones sueltas o desgaste.
• Cuidado de la lente: Mantenga la lente del sensor de movimiento limpia y libre de obstrucciones (por ejemplo, suciedad, arañas, etc.).webs) to ensure optimal performance.

Solución de problemas

Presupuesto

Garantía y soporte

iMaihom products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official iMaihom webSitio. Conserve su recibo de compra como comprobante para reclamaciones de garantía.