Dyeetic 6000A

Manual del usuario del arrancador portátil para coche y banco de energía Dyeetic 6000A

Model: 6000A | Brand: Dyeetic

1. Introducción

Thank you for choosing the Dyeetic 6000A Portable Car Jump Starter. This device is designed to provide reliable power for jump-starting 12V vehicles, charging electronic devices, and offering emergency lighting. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Precauciones de seguridad

Always observe the following safety guidelines to prevent injury or damage to the device and your vehicle:

  • Lea atentamente todas las instrucciones antes de utilizar el arrancador.
  • Asegúrese de que la conexión sea de polaridad correcta (cable rojo)amp a positivo, cl negroamp al negativo) para evitar chispas o daños.
  • Do not attempt to jump start an engine that exceeds the maximum displacement supported by the jump starter (All Gas and 10.0L Diesel).
  • Do not crank the engine for more than 3 seconds at a time. Allow the jump starter to cool down for at least 1 minute between each start attempt.
  • Mantenga el dispositivo fuera del alcance de los niños.
  • No exponga el dispositivo a temperaturas extremas, luz solar directa o agua.
  • Ensure the device has at least 50% battery charge before use for optimal performance.
  • The device features 10-in-1 smart protection, including over-current, reverse polarity, short-circuit, and over-voltage protección.

3. Contenido del paquete

Verifique que todos los artículos estén presentes en su paquete:

  • Dyeetic 6000A Portable Car Jump Starter
  • Smart Jumper Cables with Force Start button
  • Cable de carga USB-C
  • Manual de usuario
  • Durable EVA Carrying Case
Dyeetic 6000A Jump Starter with all accessories including smart jumper cables, USB-C cable, user manual, and EVA carrying case.
Figure 1: All components included in the Dyeetic 6000A Jump Starter package.

4. Producto terminadoview

The Dyeetic 6000A Jump Starter is a versatile device with multiple functionalities:

  • Potente arrancador de batería: Delivers 6000A peak current to start 12V vehicles, including all gas and up to 10.0L diesel engines.
  • Banco de energía portátil: Equipped with a 26800mAh battery and dual USB ports (including Quick Charge 3.0) for charging phones, tablets, and other devices.
  • Linterna de emergencia: Features a built-in 600-lumen LED light with Flashlight, SOS, and Strobe modes.
  • Seguridad avanzada: Incorporates 10-in-1 smart protection for safe operation.
  • Tiempo de espera largo: Can hold its charge for up to 24 months.
Dyeetic 6000A Jump Starter connected to a car battery under the hood, highlighting its powerful 6000A capability for all gas and 10.0L diesel 12V vehicles.
Figure 2: The 6000A Jump Starter ready to power a vehicle.
Dyeetic 6000A Jump Starter functioning as a 26800mAh power bank, charging various devices like phones, game consoles, tablets, drones, earphones, cameras, and smartwatches via multiple USB outputs.
Figure 3: The device's power bank functionality with multiple outputs.
Dyeetic 6000A Jump Starter's emergency flashlight illuminating a dark road, showcasing its flashlight, SOS, and strobe modes.
Figure 4: The 600-lumen LED emergency flashlight in action.
Dyeetic 6000A Jump Starter protected by a shield icon, illustrating its 10 leading safety protections including reverse charge, reverse polarity, over voltage, low temperature, high temperature, over current, over charge, anti-spark, overload, and short circuit protection.
Figura 5: Sobreview of the 10 leading safety protections.
Dyeetic 6000A Jump Starter with a clock icon indicating 24 months, signifying its ultra-low power consumption and 24-month standby time on a full charge.
Figure 6: The device offers up to 24 months of standby time.

5. Configuración: Carga inicial

Before first use, fully charge your Dyeetic 6000A Jump Starter. Use the provided USB-C charging cable and connect it to a compatible USB wall adapter (not included). The digital display will show the charging progress. A full charge is indicated when the display shows 100%.

6. Instrucciones de funcionamiento

6.1. Arranque de su vehículo con pinzas

  1. Conectar cables puente: Insert the blue plug of the smart jumper cables into the jump starter's EC5 port. Ensure a secure connection.
  2. Adjuntar Clamps a la batería: Conecte el positivo rojo (+) clamp to the positive terminal of your vehicle's battery. Connect the black negative (-) clamp al terminal negativo de la batería de su vehículo.
  3. Luz indicadora de verificación: The indicator light on the smart jumper cable will turn solid green if the connection is correct. If it shows red or flashes, check your connections for proper polarity. If no light, press the 'BOOST' button on the smart cable for 3 seconds to enter forced start mode (use with caution).
  4. Vehículo de arranque: Once the green light is solid, start your vehicle's engine within 45 seconds. If the engine does not start, wait at least 1 minute before attempting again. Do not crank for more than 3 seconds per attempt.
  5. Quitar clamps: Después de que el vehículo arranque, retire inmediatamente los cables puente inteligentes de la batería del vehículo y luego desconéctelos del arrancador.
Dyeetic 6000A Jump Starter with smart jumper cables connected to a car battery, showing the correct positive and negative connections.
Figure 7: Correct connection of smart jumper cables to a vehicle battery.

Video: How to Jump Start a Car with NEXPOW Jump Starter

Video 1: This video demonstrates the step-by-step process of using a portable jump starter to start a vehicle, including connecting the clamps and initiating the start sequence.

6.2. Uso como banco de energía portátil

The Dyeetic 6000A can charge various electronic devices:

  • Connect your device's USB charging cable to one of the jump starter's USB output ports (USB-A 5V/9V/12V QC3.0 or USB-A 5V/2.4A).
  • El arrancador comenzará a cargar automáticamente su dispositivo.
  • La pantalla digital mostrará el porcentaje de batería restante.tage del arrancador auxiliar.

6.3. Operating the LED Emergency Flashlight

The built-in 600-lumen LED flashlight has three modes:

  1. Modo linterna: Mantenga presionado el botón de encendido durante 3 segundos para encender la linterna.
  2. Modo SOS: With the flashlight on, press the power button once to switch to SOS signal mode.
  3. Modo estroboscópico: Presione el botón de encendido nuevamente para activar el modo de luz estroboscópica.
  4. Apagar: Presione el botón de encendido una tercera vez para apagar la linterna.

7. Mantenimiento

To ensure the longevity and performance of your jump starter:

  • Recarga regularmente: Recargue el dispositivo cada 3 a 6 meses, incluso si no se utiliza, para mantener la salud de la batería.
  • Almacenamiento: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. The EVA carrying case provides excellent protection.
  • Limpieza: Limpie el dispositivo con un paño suave y seco. No utilice productos químicos agresivos ni materiales abrasivos.
  • Cuidado de cables: Inspeccione los cables puente para detectar cualquier daño antes de cada uso. Reemplácelos si están desgastados o dañados.

8. Solución de problemas

ProblemaPosible causaSolución
El arrancador auxiliar no se enciende.La batería está completamente descargada.Cargue completamente el arrancador.
El vehículo no arranca después de la conexión.Incorrect connection or insufficient charge.Check polarity. Ensure jump starter is at least 50% charged. Press 'BOOST' button if no green light.
El indicador de cable inteligente se muestra rojo/intermitente.Incorrect polarity or short circuit detected.Disconnect immediately and re-check connections. Ensure clamps no se tocan entre sí.
El dispositivo externo no se carga.Jump starter battery low or cable issue.Cargue el arrancador. Pruebe con otro cable USB.

9. Especificaciones

CaracterísticaDetalle
MarcaDyeetic
Modelo6000A
Cima Ampanhelo6000 Amps
Volumentage12 voltios
Capacidad de la batería26800 mAh
Compatibilidad del motorAll Gas and 10.0L Diesel Engines
Salida USB 15V/9V/12V (QC3.0)
Salida USB 25 V/2.4 A
Entrada tipo C5 V/9 V/12 V
Linterna LED600 lúmenes (linterna, SOS, luz estroboscópica)
Dimensiones del producto4.5 x 18 x 8.5 cm
Peso del artículo1.13 kilogramos

10. Garantía y soporte

The Dyeetic 6000A Portable Car Jump Starter comes with a 36-month hassle-free return policy and lifetime technical support. For any questions, concerns, or technical assistance, please contact our dedicated customer service team. Refer to the contact information provided in your product packaging or visit the official Dyeetic webSitio de soporte.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.