1. Introducción y másview
The Airthereal AEH300 is a versatile 2-in-1 appliance designed to improve your indoor air quality and comfort. It combines the functions of an air purifier and a humidifier in a single unit. This device features advanced filtration technology for air purification and maintains optimal humidity levels to alleviate dryness.
Las características principales incluyen:
- Funcionalidad 2 en 1: Combines air purification and humidification.
- Advanced Air Purification: Utilizes a 3-layer filtration system to remove airborne pollutants, allergens, and odors.
- Optimal Humidification: Maintains desired humidity levels, beneficial during dry seasons.
- Diseño fácil de usar: Features an intuitive interface with easy-to-use controls.
- Modo de suspensión silenciosa: Operates at a low noise level for undisturbed rest.
- Auto Humidity Control: Ajusta automáticamente la humedad a un nivel confortable.
- Monitor de calidad del aire: Detects PM2.5 levels and provides real-time feedback.
- Función de temporizador: Customizable operation from 1 to 24 hours.
- Bloqueo para niños: Evita cambios accidentales en la configuración.
Image: Airthereal AEH300 2-in-1 Air Purifier and Humidifier with key features such as 3-in-1 HEPA filter, Sleep Mode, 1.5L Water Tank, 4 Wind Speed, Auto Humidity Control, PM2.5 Detection, 1-24H Timer Setting, Auto Mode, and Child Lock.
2. Instrucciones de seguridad
Please read all safety instructions carefully before using the Airthereal AEH300 to prevent injury or damage to the device.
- Coloque siempre la unidad sobre una superficie firme y nivelada.
- No bloquee las entradas ni salidas de aire.
- Mantenga la unidad alejada del agua y otros líquidos.
- Desenchufe la unidad antes de limpiarla o realizar cualquier mantenimiento.
- No utilice la unidad si el cable de alimentación o el enchufe están dañados.
- Mantener fuera del alcance de los niños y las mascotas.
- Use only original Airthereal replacement filters.
- No intente reparar ni modificar la unidad usted mismo. Póngase en contacto con el servicio de atención al cliente para obtener ayuda.
3. Product Components and Filtration System
The Airthereal AEH300 consists of a main unit, a multi-layer air filter, and a humidifier filter. The air purification system employs a 3-layer filtration process:
- Pre-Filter (Nylon Mesh): Captura partículas grandes como polvo, pelusa y pelo de mascotas.
- Filtro HEPA: Traps fine particles like PM2.5, pollen, and pet dander.
- Filtro de carbón activado: Absorbs odors, smoke, and harmful gases like formaldehyde and toluene.
Image: Diagram illustrating the 3-layer powerful filtration system for deep air purification, showing the Pre-Filter (Nylon Mesh), HEPA Filter, and Activated Carbon Filter.
Image: Detailed diagram of the air purification process, showing how the Pre-Filter, HEPA Filter, and Activated Carbon Filter capture smoke, odors, and pollutants.
4. Configuración
Follow these steps to set up your Airthereal AEH300 unit:
- Desembalaje de la unidad: Retire con cuidado la unidad y todos los materiales de embalaje de la caja.
- Coloque la unidad: Position the unit on a flat, stable surface, ensuring there is at least 6 inches (15 cm) of space around all sides for proper airflow.
- Install/Check Filters: The filters are typically pre-installed but may be wrapped in plastic for shipping. Open the bottom cover to access the air filter and ensure it is unwrapped and correctly seated. For the humidifier filter, open the top lid of the water tank, twist to unlock and remove the filter, remove any plastic, then insert the new filter and twist to lock.
- Fill the Water Tank (for Humidifier function): Open the top lid of the unit. Pour clean, cool tap water directly into the water tank. Do not exceed the maximum fill line (1.5L / 3 Pints). Close the lid securely.
- Conecte la electricidad: Conecte el cable de alimentación a una toma eléctrica estándar.
Image: Step-by-step guide for replacing the humidifier filter: 1. Open the lid on top of the water tank. 2. Twist to unlock and remove the filter. 3. Insert the new filter. 4. Twist to lock. 5. Close the lid.
Image: User pouring water directly into the top-fill water tank of the Airthereal AEH300, demonstrating the easy top-fill design.
5. Instrucciones de funcionamiento
The control panel is located on the top of the unit. Use the touch controls to operate the device.
Encendido/apagado
- Toca el Botón de encendido (
) para encender o apagar la unidad.
Modos
- Modo automático: Toca el Botón automático (
) to activate. The unit will automatically adjust fan speed based on detected PM2.5 levels. - Modo de sueño: Toca el Botón de dormir (
) to enter sleep mode. The display lights will dim or turn off, and the fan will operate at its lowest, quietest setting.
Image: Airthereal AEH300 operating in Auto Mode. The unit detects indoor air quality (PM2.5) and automatically adjusts the wind speed from level 1 to 4 to purify the air.
Image: Airthereal AEH300 in Whisper-Quiet Sleep Mode (24dB). The display light is off, and a 1-24 hour timer can be set. Air quality indicators (Green: Good, Orange: Medium, Red: Unhealthy) are shown.
Velocidad del ventilador
- Toca el Botón de velocidad del ventilador (
) repeatedly to cycle through 4 fan speed levels.
Minutero
- Toca el Botón del temporizador (
) para configurar el tiempo de funcionamiento de 1 a 24 horas. La unidad se apagará automáticamente después del tiempo establecido.
Bloqueo para niños
- Mantenga pulsado el Botón de bloqueo para niños (
) for 3 seconds to activate or deactivate the child lock. When active, other buttons will not respond.
Pantalla de calidad del aire
- The digital display shows real-time PM2.5 levels. A color indicator light changes based on air quality:
- Verde: Good air quality (PM2.5 ≤ 12)
- Naranja: Medium air quality (12 < PM2.5 ≤ 35)
- Rojo: Unhealthy air quality (PM2.5 > 35)
Image: Display showing PM2.5 levels and corresponding air quality indicators (Green for Good, Orange for Medium, Red for Unhealthy).
Image: Comparison showing the unit operating with the humidifier function (adding moisture) versus air purifier only (enjoying fresh, clean air).
6. Mantenimiento
Regular maintenance ensures the optimal performance and longevity of your Airthereal AEH300.
Reemplazo del filtro de aire
The air filter should be replaced periodically, typically every 6-8 months, depending on usage and air quality. The unit comes with 1 spare air filter.
- Desconecte la unidad de la toma de corriente.
- Turn the unit upside down and twist the bottom cover counter-clockwise to unlock.
- Retire el filtro de aire viejo.
- Insert the new air filter, ensuring it is seated correctly.
- Vuelva a colocar la cubierta inferior y gire en el sentido de las agujas del reloj para bloquearla.
- Plug in the unit and reset the filter replacement indicator (if applicable, refer to the full manual for specific button combination).
Humidifier Filter Replacement
The humidifier filter should be replaced every 6 months to maintain efficient humidification and prevent mineral buildup. The unit comes with 2 spare humidifier filters.
- Unplug the unit and remove the top lid.
- Twist the humidifier filter counter-clockwise to unlock and lift it out.
- Deseche el filtro viejo.
- Insert a new humidifier filter and twist clockwise to lock it into place.
- Vuelva a colocar la tapa superior.
Image: Close-up of the humidifier filter, designed for long-lasting freshness and resistance to yellowing.
Limpieza de la unidad
- Limpie el exterior de la unidad con un paño suave y seco.
- No utilice limpiadores abrasivos ni disolventes.
- Clean the water tank regularly to prevent mold or mildew growth. Use a mild detergent and rinse thoroughly.
7. Solución de problemas
If you encounter issues with your Airthereal AEH300, please refer to the following common troubleshooting steps:
| Problema | Posible causa | Solución |
|---|---|---|
| La unidad no se enciende | No hay fuente de alimentación; el cable de alimentación no está enchufado correctamente; bloqueo para niños activado. | Check power connection; Ensure outlet is functional; Deactivate child lock by pressing and holding the lock button. |
| No mist/humidification | Water tank is empty; Humidifier filter is clogged or needs replacement; Unit is in air purifier only mode. | Refill water tank; Replace humidifier filter; Ensure humidifier function is active. |
| Weak airflow/Purification | Air filter is dirty or clogged; Air inlets/outlets are blocked. | Replace air filter; Ensure no obstructions around the unit. |
| Ruido inusual | Unit not on a level surface; Foreign object inside; Filter not installed correctly. | Place on a flat surface; Unplug and check for obstructions; Reinstall filters properly. |
| Indicador de calidad del aire siempre rojo/naranja | High pollution levels; Sensor is dirty. | Allow unit to run longer; Clean the PM2.5 sensor (refer to full manual for location and cleaning instructions). |
If the problem persists after trying these solutions, please contact Airthereal customer support.
8. Especificaciones
| Característica | Especificación |
|---|---|
| Modelo | AEH300 |
| Funcionalidad | 2-in-1 Air Purifier & Humidifier |
| Filtración de aire | 3-Layer (Pre-Filter, HEPA, Activated Carbon) |
| Humidification Type | Evaporative Mist-Free |
| Capacidad del tanque de agua | 1.5 litros (3 pintas) |
| Salida máxima de agua | 300 ml/h |
| CAD | 300 m³/h |
| Área de cobertura | 500-1325 pies cuadrados |
| Velocidades del ventilador | 4 niveles |
| Nivel de ruido (modo de suspensión) | 24 dB |
| Minutero | 1-24 Hours Adjustable |
| Pantalla de calidad del aire | PM2.5 Real-Time Sensor with Color Indicator |
| Controles | Panel de control táctil |
| Dimensiones (An x Pr x Al) | 9.45 x 9.45 x 21 pulgadas |
Image: Dimensions of the Airthereal AEH300 (9.45 inches wide, 21 inches tall) and examples of its compact design fitting into various spaces like bedrooms, living rooms, and offices.
Image: A comparison table highlighting the Airthereal AEH300's features such as Evaporative Mist-Free Humidification, Top-Fill Water Tank, 4-Stage Filtration, 1-24 Hours Timer, Air Quality Display, Touch Control Panel, Sleep Mode, Child Lock, CADR of 300 m³/h, Coverage Area of 500-1325 ft², and Size of 9.45x9.45x21 inches.
9. Garantía y soporte
Airthereal products are designed for reliability and performance. For specific warranty information regarding your AEH300 unit, please refer to the warranty card included in your product packaging or visit the official Airthereal websitio.
If you require technical assistance, have questions about your product, or need to order replacement parts, please contact Airthereal Customer Support:
- Websitio: www.airthereal.com
- Correo electrónico: Consulte al funcionario webSitio para correo electrónico de contacto de servicio al cliente.
- Teléfono: Consulte al funcionario webSitio para número de teléfono de atención al cliente.
Please have your model number (AEH300) and purchase date ready when contacting support.