Manual de instrucciones del medidor de energía monofásico eléctrico EARU de 220 V y 80 A

1. Introducción

The EARU Electric Single Phase Energy Meter (Model EARU-1006) is designed for accurate monitoring of electrical parameters in single-phase 220V, 80A systems. It provides real-time data for voltage (V), current (A), power (W), power factor (PF), frequency (Hz), and kilowatt-hour (kWh) consumption. This device assists in understanding energy usage and identifying potential inefficiencies in your electrical system.

2. Información de seguridad

• La instalación debe ser realizada por un electricista calificado de acuerdo con los códigos y regulaciones eléctricas locales.
• Asegúrese de que la fuente de alimentación principal esté desconectada antes de la instalación o el mantenimiento para evitar descargas eléctricas.
• No opere el dispositivo si parece dañado.
• This device is designed for indoor use in a dry environment. Avoid exposure to moisture or extreme temperatures.
• The maximum current rating is 80A. Do not exceed this limit.

3. Producto terminadoview

The EARU-1006 energy meter features a clear LCD display that shows various electrical parameters simultaneously. It is designed for DIN rail mounting, allowing for easy integration into standard electrical distribution boards.

Figura 1: Frente view of the EARU Electric Single Phase Energy Meter, showing the LCD display with various electrical readings.

Figura 2: detallada view of the LCD display, illustrating the layout of voltage, current, power, frequency, power factor, and kWh readings.

4. Contenido del paquete

El paquete normalmente incluye:

• 1 x EARU Electric Single Phase Energy Meter (Model EARU-1006)

5. Especificaciones

Figure 3: Technical data table providing detailed specifications of the energy meter.

Figure 4: Dimensional drawing of the energy meter, showing measurements in both millimeters and inches.

6. Configuración e instalación

Importante: Asegúrese de que toda la energía esté desconectada antes de continuar con la instalación.

1. Montaje: The EARU-1006 is designed for 35mm DIN rail mounting. Snap the meter onto the DIN rail securely within your electrical panel.
2. Alambrado: Refer to the wiring diagram below for correct connection. This is a single-phase, 2-wire direct connection meter.
• Connect the Live (L) input wire to the designated 'L In' terminal.
• Connect the Neutral (N) input wire to the designated 'N In' terminal.
• Connect the Live (L) output wire to the designated 'L Out' terminal.
• Connect the Neutral (N) output wire to the designated 'N Out' terminal.
3. Encendido: Once all connections are secure and verified, restore power to the circuit. The LCD display should illuminate and begin showing readings.

Figure 5: Wiring diagram illustrating the correct connections for the single-phase energy meter.

7. Instrucciones de funcionamiento

The energy meter operates automatically once powered on. The LCD display continuously cycles through or shows multiple parameters simultaneously.

• Reading Parameters: The display shows Voltage (V), Current (A), Power (W), Power Factor (PF), Frequency (Hz), and Kilowatt-hour (kWh).
• kWh Reading: The meter records total kWh consumption. This reading is permanent and accumulates over time.
• Restablecimiento de kWh: The meter features a manual reset function for the kWh reading. Consult the device's physical buttons or specific instructions on the meter itself for the reset procedure. Typically, a long press on a designated button (if present) will reset the temporary kWh value. The total kWh value is usually non-resettable.

8. Mantenimiento

• Limpieza: Utilice un paño suave y seco para limpiar el exterior del medidor. No utilice limpiadores abrasivos ni disolventes.
• Inspección: Periodically inspect the wiring connections to ensure they are tight and free from corrosion.
• Ambiente: Asegúrese de que el entorno operativo permanezca dentro de los rangos de temperatura y humedad especificados.

9. Solución de problemas

10. Garantía y soporte

The EARU Electric Single Phase Energy Meter (Model EARU-1006) typically comes with a 1-year warranty from the date of purchase. Please retain your purchase receipt for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to the product packaging or manufacturer's websitio para detalles de contacto.