1. Introducción
This manual provides detailed instructions for the installation, operation, and maintenance of your GAMEMAX N90 BG ATX PC Case. The N90 BG features a modular dual-chamber design, a 512-LED matrix display, and panoramic curved glass. It is designed for BTF motherboards, offering a cable-free interior, efficient 270° cooling, and includes six ARGB PWM fans. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.

Figura 1: Lado frontal view of the GAMEMAX N90 BG ATX PC Case, showcasing its panoramic curved glass, internal components, and the integrated LED display.
2. Contenido del paquete
Verify that all components are present before proceeding with the installation:
- GAMEMAX N90 BG ATX PC Case
- Caja de accesorios (tornillos, separadores, bridas)
- Six pre-installed ARGB PWM fans
- Manual de usuario (este documento)
3. Configuración e instalación
Follow these steps for proper assembly of your PC components within the GAMEMAX N90 BG case.
3.1. Preparación del caso
- Desembalaje: Retire con cuidado la funda de su embalaje.
- Eliminación de paneles: The panoramic curved glass and side panels can be removed for easier access. Refer to Figure 2 for an interior view.

Figura 2: Interior view of the GAMEMAX N90 BG case, highlighting the spacious motherboard tray and fan mounting locations.

Figura 3: Lado view of the case with the panel removed, providing access to the internal structure for component installation.
3.2. Instalación de la placa base
The N90 BG supports ATX motherboards, including BTF (Back-To-the-Future) motherboards for a cable-free aesthetic. Install the necessary standoffs for your motherboard size, then carefully place the motherboard and secure it with screws.

Figura 4: Interna view demonstrating potential component placement and cable routing paths.
3.3. Instalación de la fuente de alimentación
The case features a bottom mount for the power supply. Install your power supply unit (PSU) into the designated compartment at the bottom of the case and secure it with screws from the rear.

Figura 5: Posterior view of the case, illustrating the power supply mounting area and expansion slots.
3.4. Instalación de la unidad de almacenamiento
Utilize the available drive bays for 2.5-inch SSDs or 3.5-inch HDDs. Refer to the accessory box for specific mounting hardware.
3.5. Instalación del ventilador y del radiador
The case comes with six pre-installed ARGB PWM fans for efficient 270° cooling. Additional fans or radiators can be mounted in various positions (top, side, rear) as needed. Ensure proper airflow direction for optimal cooling.

Figure 6: Top-down interior view, showing available mounting points for additional fans or liquid cooling radiators.
3.6. Gestión de cables
The dual-chamber design and BTF motherboard compatibility facilitate excellent cable management, allowing for a clean, cable-free interior. Route all cables through the designated cutouts and secure them using the provided cable ties in the rear chamber.

Figura 7: Lado view of the case, illustrating the solid panel that conceals the cable management area.
4. Instrucciones de funcionamiento
4.1. Encendido
After all components are installed and cables are connected, close all panels. Connect the power cable to your PSU and press the power button located on the front panel of the case.
4.2. 512-LED Matrix Display
The integrated 512-LED matrix display on the front panel can be customized to show various information or patterns. Refer to your motherboard's software or the GAMEMAX utility (if applicable) for configuration options.
4.3. ARGB PWM Fans
The six pre-installed ARGB PWM fans are connected to a controller or directly to your motherboard. Fan speed and RGB lighting can typically be controlled via motherboard software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) or a dedicated fan controller.
5. Mantenimiento
El mantenimiento regular garantiza la longevidad y el rendimiento óptimo de la carcasa de su PC.
- Filtros de polvo: Periodically clean the dust filters located on the intake areas of the case. Gently remove them and clean with compressed air or water (ensure they are completely dry before reinstallation).
- Limpieza exterior: Wipe the exterior surfaces, including the panoramic curved glass, with a soft, damp paño. Evite los limpiadores abrasivos.
- Limpieza interior: Utilice aire comprimido para eliminar el polvo de los componentes internos y los ventiladores. Asegúrese de que el sistema esté apagado y desenchufado antes de limpiarlo.
6. Solución de problemas
Si encuentra problemas, consulte los siguientes pasos de solución de problemas comunes:
- Sin energía:
- Asegúrese de que la fuente de alimentación esté encendida y conectada correctamente a la toma de pared.
- Verifique que todos los cables de alimentación (ATX de 24 pines, CPU, GPU) estén conectados de forma segura a la placa base y a los componentes.
- Verifique la conexión del interruptor de encendido del panel frontal a la placa base.
- Fans Not Spinning / LEDs Not Lighting Up:
- Confirm fan and ARGB cables are correctly connected to the motherboard headers or fan controller.
- Check motherboard BIOS/UEFI settings or software for fan and RGB control.
- Problemas de visualización:
- Ensure your monitor is connected to the graphics card, not the motherboard's integrated graphics (unless using integrated graphics).
- Verifique que la tarjeta gráfica esté colocada correctamente en su ranura PCIe y tenga energía adecuada.
For further assistance, consult your motherboard manual or the GAMEMAX support resources.
7. Especificaciones
| Característica | Especificación |
|---|---|
| Marca | JUEGO MÁXIMO |
| Nombre del modelo | GAMEMAX N90 BG |
| Número de modelo del artículo | N90 BG |
| Compatibilidad de la placa base | ATX |
| Tipo de caso | Torre Media |
| Color | Negro |
| Material | Vidrio, plástico ABS |
| Dimensiones del producto (LxAnxAl) | 17.28 x 9.65 x 20.87 pulgadas |
| Peso del artículo | 28.5 libras (12.95 kilogramos) |
| Número de puertos USB 3.0 | 1 |
| Tipo de montaje de la fuente de alimentación | Montaje inferior |
| Método de enfriamiento | Air (with 6 pre-installed ARGB PWM fans) |
| Usos recomendados | Juego de azar |
8. Garantía y soporte
GAMEMAX stands behind the quality of its products. While specific warranty details may vary by region, GAMEMAX products are designed for reliability and performance.
For technical support, warranty claims, or further inquiries, please visit the official GAMEMAX store or contact their customer service. You can find more information and support resources at the GAMEMAX Store on Amazon.