1. Introducción
The POMIACAM HD-2950 is a versatile 5-inch TFT-LCD CCTV camera tester designed for the installation and maintenance of HD coaxial cameras. It supports 8MP AHD, CVI, TVI, and Analog CVBS camera testing. This device also includes functions such as UTP cable testing, HDMI and VGA input, RS485 PTZ control, audio testing, and 12V power output, making it an essential tool for security system professionals.
Important Note: This device does not support IP network cameras.
Figure 1: Warning indicating that IP cameras are not supported by the HD-2950 tester.
2. Características del producto
- 8MP AHD/CVI/TVI/Analog CVBS Camera Test: Automatically recognizes camera types and displays resolution and frame rate. Supports coaxial PTZ and OSD menu calls.
- VGA & HDMI Input: Features 1 channel HDMI signal input (max 4K 30FPS) and 1 channel VGA video signal input (max 1920×1200P 60FPS).
- CVBS Video Signal Test: Includes 1 channel BNC input (NTSC/PAL auto adapt), PTZ control (RS485, 600-115200bps, 30+ protocols), and 1 channel audio signal input for audio testing.
- Probador de cable UTP: Tests UTP cable continuity, detects faulty RJ45 cable pins, and measures network cable length up to 3000 meters.
- Display & Battery: Equipped with a 5-inch TFT-LCD screen (800x480 resolution, non-touch). Built-in 3.7V 4000mAh Li-ion battery provides approximately 8 hours of working time after 5 hours of charging.
- Potencia de salida: Provides DC12V/1A power output for cameras.
- Luz LED: Luz LED integrada para trabajar en entornos oscuros.
Figura 2: Sobreview of the HD-2950 CCTV Tester's main features and supported technologies.
3. Contenido del paquete
The following items are included in your POMIACAM HD-2950 CCTV Camera Tester package:
- 1x CCTV Camera Tester (HD-2950)
- 1x Cargador
- 1x Li-ion battery (built-in)
- 1x DC 5V power cable
- 1x Safety cord/Wrist belt
- 1x Audio test cable
- 1x BNC cable
- 1x RS485 Control cable
- 1x Power output cable
- 1x DC 12V 1A adapter
- 1x Cable tester (remote unit)
Figure 3: Visual representation of the HD-2950 CCTV Tester and its included accessories.
4. Dispositivo terminadoview
4.1. Botones e indicadores
Figura 4: Frente view of the HD-2950 with numbered callouts for buttons and indicators.
- RS485 Data Transmission Indicator: Lights up during RS485 communication.
- Indicador de carga: Indica el estado de carga.
- Indicador de encendido: Muestra el estado de energía del dispositivo.
- Botones de zoom: Adjust the digital zoom level of the video feed.
- Focus Buttons: Adjust the focus of the connected camera (if supported).
- Botón de confirmación: Confirma selecciones o ingresa a menús.
- PTZ Control Buttons: Navigate and control Pan/Tilt/Zoom functions of PTZ cameras.
- Return/Close Button: Navigates back or closes current menu/function.
- Botón de ajuste: Accesses settings or specific function parameters.
4.2. Puertos y conexiones
Figura 5: Arriba y abajo views of the HD-2950 highlighting input/output ports.
- Salida de potencia DC12V/1A: Provides power to connected cameras.
- Entrada HDMI: For connecting external HDMI video sources (up to 4K 30FPS).
- AHD CVI TVI CVBS IN (BNC): Main input for coaxial camera signals.
- Luz: Linterna LED incorporada.
- Puerto RS485: Para control PTZ y comunicación de datos.
- Audio en: For connecting audio input from cameras or other devices.
- UTP/SCAN (RJ45): For UTP cable testing.
- Entrada VGA: For connecting external VGA video sources (up to 1920×1200P 60FPS).
- DC5V/2A Power Input (Type-C): Para cargar el dispositivo.
5. Configuración
5.1. Carga del dispositivo
Before initial use, fully charge the HD-2950. Connect the provided DC5V/2A charger to the Type-C power input port. The charging indicator will illuminate. A full charge typically takes approximately 5 hours and provides up to 8 hours of normal operation.
Figure 6: Battery charging and working time details for the HD-2950.
5.2. Encendido / apagado
Press and hold the Power button (refer to Figure 5) for a few seconds to turn the device on or off. The Power indicator will show the device's status.
6. Operación
6.1. Coaxial Camera Test (AHD/CVI/TVI/CVBS)
Connect your AHD, CVI, TVI, or CVBS analog camera to the "AHD CVI TVI CVBS IN" BNC port using a BNC cable. The HD-2950 will automatically detect the camera type, resolution, and frame rate. You can navigate the camera's OSD menu and control PTZ functions (if supported by the camera) using the device's buttons.
Figure 7: Auto HD function recognizing camera type and displaying PTZ settings.
Figura 8: En vivo view from an 8MP coaxial camera being tested by the HD-2950.
Demostración en vídeo: How Analog 4 IN 1 (TVI-AHD-CVI-CVBS) Camera Test
Video 1: Demonstrates connecting and testing 4-in-1 analog cameras (TVI, AHD, CVI, CVBS) with the tester. Shows how to connect the camera, power it, and view the live feed. Also shows how to switch between different camera modes if the image appears black and white.
6.2. Prueba de cable UTP
To test UTP cable continuity, connect one end of the RJ45 cable to the "UTP/SCAN" port on the tester and the other end to the remote cable tester unit. The screen will display the continuity status of each pin. An "X" indicates a defective pair. For accurate length measurement, ensure the remote end of the cable is not connected to any other device.
Figure 9: UTP cable testing interface, showing pin mapping and fault detection.
6.3. RS485 PTZ Control
Connect the RS485 control cable from the tester's RS485 port to the PTZ camera. Use the PTZ Control buttons (refer to Figure 4) to adjust the camera's pan, tilt, and zoom. Access the PTZ settings menu to configure protocols, baud rate, and address if needed.
Figure 10: PTZ control interface showing options for coaxial and RS485 protocols.
6.4. HDMI & VGA Input
The HD-2950 can serve as a display for external video sources. Connect an HDMI cable to the "HDMI IN" port or a VGA cable to the "VGA Input" port to view video from DVRs, NVRs, or other compatible devices. The tester supports HDMI input up to 4K 30FPS and VGA input up to 1920×1200P 60FPS.
Figure 11: Demonstrates connecting the HD-2950 to a DVR/NVR using VGA and HDMI inputs.
6.5. Prueba de audio
Connect the audio output from your camera or audio pickup device to the "Audio In" port on the tester using the provided audio test cable. This allows you to verify if the audio signal is functioning correctly.
6.6. Salida de potencia de 12 V
The HD-2950 can supply DC12V/1A power to a camera directly from its "DC12V/1A Power Output" port. This is useful for powering cameras during installation or testing without needing an external power supply.
7. Mantenimiento
- Mantenga el dispositivo limpio y libre de polvo y humedad.
- Evite dejar caer el dispositivo o someterlo a fuertes impactos.
- Guarde el dispositivo en un lugar fresco y seco cuando no esté en uso.
- Regularly charge the battery to maintain its lifespan, even if not in frequent use.
8. Solución de problemas
8.1. Black and White Image Display
If the camera image appears black and white, it may indicate that the signal type (AHD, CVI, TVI, CVBS) does not correspond between the camera and the tester. Use the tester's menu to manually switch the signal type to match the connected camera. This should resolve the issue.
Demostración en vídeo: HD-2950 Auto HD TVI/CVI/AHD Coaxial Camera Tester
Video 2: Demonstrates the auto-detection feature for TVI/CVI/AHD coaxial cameras and how to navigate the OSD menu. Includes a segment on troubleshooting black and white images by manually adjusting the signal type.
Demostración en vídeo: Auto HD TVI/CVI/AHD/CVBS CCTV Tester Monitor
Video 3: Shows the automatic detection and display of various HD analog camera signals (TVI, CVI, AHD, CVBS) on the tester monitor.
Demostración en vídeo: CCTV tester monitor
Video 4: A brief demonstration of the CCTV tester monitor's display capabilities and interface.
Demostración en vídeo: SGEF Operation video, CCTV Tester, Camera Debugging Helper
Video 5: An operation video demonstrating various functions of a CCTV tester, useful for camera debugging.
9. Especificaciones
| Característica | Especificación |
|---|---|
| Número de modelo | SHX-2950 |
| Mostrar | 5 inch TFT-LCD, 800 x 480 resolution (Non-touch screen) |
| Tipos de cámaras compatibles | 8MP AHD, 8MP CVI, 8MP TVI, CVBS Analog |
| Entrada HDMI | Max 4K 30FPS |
| Entrada VGA | Max 1920×1200P 60FPS |
| Control PTZ | RS485, Baud 600-115200bps, compatible with 30+ protocols |
| UTP Cable Test Length | Max 3000 metros |
| Batería | Batería de iones de litio incorporada de 3.7 V, 4000 mAh |
| Tiempo de trabajo | Approx. 8 hours (after 5 hours charging) |
| Potencia de salida | 12 V CC/1 A |
| Entrada de potencia | DC5V/2A (Tipo C) |
| Dimensiones del producto | 7.87 x 5.51 x 3.94 pulgadas |
| Peso del artículo | 1.76 libras |
10. Garantía y soporte
For warranty information and technical support, please refer to the documentation provided with your purchase or contact POMIACAM customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.