1. Introducción
Thank you for choosing the T-SUN Portable LED Work Light. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new work light. Please read this manual thoroughly before use and retain it for future reference.
2. Producto terminadoview
The T-SUN Portable LED Work Light is designed to provide bright, versatile illumination for various tasks and environments. It features high-efficiency LED beads, adjustable brightness levels, and compatibility with Dewalt 20V batteries. Additionally, it includes integrated USB and Type-C charging ports for powering external devices.
- Brillo alto: Up to 5200 Lumens for extensive area coverage.
- Modos de brillo dual: High (5200 LM, 6-8 hours runtime) and Low (1800 LM, 18-20 hours runtime) for energy conservation.
- Ángulo de haz amplio: 120-140° for broad illumination.
- Compatibilidad de la batería: Designed for use with Dewalt 20V batteries (e.g., DCB201, DCB203, DCB204, DCB205, DCB206). Nota: Batería no incluida.
- Puertos de carga duales: 5V/2.1A USB-A and Type-C outputs for charging phones, tablets, and other electronic devices.
- Construcción duradera: Robust aluminum housing for effective heat dissipation and longevity.
- Cabeza ajustable: The light head can be adjusted to direct illumination precisely where needed.
3. Instrucciones de seguridad
Para garantizar un funcionamiento seguro, tenga en cuenta lo siguiente:
- Always ensure the work light is detached from the battery when not in use to prevent power drain.
- No mire directamente a la luz LED cuando esté encendida, ya que esto puede causar daños en los ojos.
- Mantenga el dispositivo alejado del agua y la humedad para evitar descargas eléctricas o daños.
- Do not attempt to disassemble or modify the work light. Repairs should only be performed by qualified personnel.
- Use only compatible Dewalt 20V batteries. Using incompatible batteries may damage the device or cause injury.
- Mantener fuera del alcance de los niños.
- Ensure proper ventilation when operating for extended periods to prevent overheating.
4. Contenido del paquete
Verifique que todos los artículos estén presentes en su paquete:
- 2 x T-SUN Portable LED Work Lights
- 1 x Manual de instrucciones (este documento)
5. Configuración
5.1 Colocación de la batería
- Ensure the work light is switched off.
- Align the grooves on your Dewalt 20V battery with the corresponding slots on the base of the T-SUN work light.
- Deslice la batería firmemente en su lugar hasta que haga clic, lo que indica una conexión segura.
5.2 Detaching the Battery
- Ensure the work light is switched off.
- Press the battery release button (usually located on the battery itself).
- Slide the battery out of the work light base.
6. Instrucciones de funcionamiento
6.1 Powering On/Off and Adjusting Brightness
- With a compatible Dewalt 20V battery attached, locate the toggle switch on the back of the work light base.
- Slide the switch to position 'I' for Low Brightness (1800 Lumens).
- Slide the switch to position 'II' for High Brightness (5200 Lumens).
- To turn off the light, slide the switch to the center 'O' position.
6.2 Adjusting the Light Head
The LED panel is mounted on an adjustable bracket. Gently pivot the light head forward or backward to direct the beam to your desired area. The head offers a flexible angle of up to 140 degrees.
7. Carga de dispositivos externos
The T-SUN LED Work Light features a dual charging port for convenience:
- Salida USB-A: 5 V/2.1 A
- Salida tipo C: 5 V/2.1 A
To charge an external device:
- Ensure a charged Dewalt 20V battery is securely attached to the work light.
- Locate the USB-A and Type-C ports on the side of the battery adapter.
- Conecte el cable de carga de su dispositivo al puerto apropiado.
- The red indicator light next to the ports will illuminate when power is being supplied.
8. Mantenimiento
- Limpieza: Limpie el exterior de la luz de trabajo con un paño suave.amp Paño. No utilice limpiadores abrasivos ni disolventes.
- Almacenamiento: Store the work light in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery before long-term storage.
- Inspección: Periodically check for any signs of damage to the housing, LED panel, or battery contacts. Do not use if damaged.
9. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | La batería no está conectada correctamente o está descargada. | Ensure battery is securely attached. Charge or replace the battery. |
| La salida de luz es tenue. | Low brightness mode selected or battery is low. | Switch to high brightness mode. Charge or replace the battery. |
| Los dispositivos externos no se cargan. | Battery discharged or cable/device incompatibility. | Ensure battery is charged. Check cable and device compatibility. |
| La luz parpadea. | Loose battery connection or low battery charge. | Re-seat the battery. Charge or replace the battery. |
10. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | TS-F0120-60-DW |
| Salida de luz (máx.) | 5200 lúmenes |
| Quétage | 52 vatios |
| Temperatura de color | 6000 Kelvin (blanco frío) |
| Ángulo del haz | 120-140 grados |
| Fuente de poder | Funciona con batería (compatible con baterías Dewalt de 20 V) |
| Salida USB | 5V/2.1A (USB-A & Type-C) |
| Material | Acrylonitrile Butadiene Styrene (ABS), Aluminum, Glass, Plastic, Polycarbonate (PC) |
| Dimensiones (L x An x Al) | 4.13" x 3.86" x 5.8" |
| Peso | Varies with battery attached |
11. Garantía y soporte
The T-SUN Portable LED Work Light comes with a Garantía del fabricante de 2 años. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear.
For warranty claims or technical support, please contact T-SUN customer service through the retailer where the product was purchased or visit the official T-SUN websitio para información de contacto.