Introducción
This manual provides comprehensive instructions for the Anderic TRA049G1M replacement remote control, designed for use with specific Harbor Breeze ceiling fan models. Please read this guide thoroughly to ensure proper setup and operation of your new remote control.
Producto terminadoview
The Anderic TRA049G1M is a direct replacement for original Harbor Breeze TRA049G1M and 2AQZU-18052 remotes. It features a user-friendly button layout for controlling fan speeds, light functions, and special modes. The remote is designed to fit into a wall mount bracket for convenient access.
Figure 1: Front of Anderic TRA049G1M Remote Control. The remote features buttons for fan off, fan high, fan medium, fan low, on/off light control & dimmer, 1 min delay for lights off, random fan speed cycling, and random lights on/off. The FCC ID 2AQZU-18052 is printed at the top, and a QR code for support is at the bottom. For more information, scan the QR code or visit https://qr.link/CpbUBA.
Compatibilidad
This remote control is compatible with the following models and kits:
- Works with Summersville collection Ceiling Fans | 4L000015190 (KIT), MRAC04S1M-LD-F0 (RECEIVER)
- Operates on 304.25 MHz frequency
- Compatible with 4L000015190 kit and MRAC04S1M-LD-F0 receiver
- Replaces original Harbor Breeze TRA049G1M & 2AQZU-18052 remote
Configuración
Instalación de la batería
The Anderic TRA049G1M remote control requires one A23 battery (sold separately). Follow these steps to install the battery:
- Ubique la tapa del compartimiento de la batería en la parte posterior del control remoto.
- Deslice la tapa de la batería hacia abajo para abrirla.
- Insert one A23 battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Deslice la tapa de la batería nuevamente en su lugar hasta que haga clic de forma segura.
Figure 2: Battery Compartment of Anderic TRA049G1M Remote Control. The image shows the back of the remote with the battery cover removed, revealing the single A23 battery slot. The FCC ID 2AQZU-18052 is also visible at the top.
Emparejamiento/Sincronización
The Anderic TRA049G1M remote control is typically a direct replacement and may not require explicit pairing if your existing fan receiver is already configured for this model. If your fan does not respond after battery installation, refer to your ceiling fan's original instruction manual for specific pairing or syncing procedures, as these steps are usually performed at the fan receiver unit.
Instrucciones de funcionamiento
Familiarize yourself with the remote's buttons and their functions:
| Botón | Función |
|---|---|
| Power (Fan Off) | Turns the ceiling fan off. |
| Light (On/Off Light Control & Dimmer) | Turns the fan light on or off. Press and hold to dim or brighten the light. |
| Ventilador de alta | Establece la velocidad del ventilador en alta. |
| 1 Min Delay (Lights Turn Off) | Press for a 1-minute delay before the lights turn off. |
| Ventilador Medio | Establece la velocidad del ventilador en media. |
| Random Fan Speed Cycling | Press to activate random fan speed cycling, providing varied airflow. |
| Ventilador bajo | Establece la velocidad del ventilador en baja. |
| Random Lights On/Off | Press to activate random lights on/off, simulating occupancy. |
Mantenimiento
Reemplazo de batería
When the remote control's range decreases or buttons become unresponsive, it may be time to replace the battery. The remote uses one A23 battery.
- Abra la tapa del compartimiento de la batería en la parte posterior del control remoto.
- Retire la batería vieja A23.
- Insert a new A23 battery, observing the correct polarity (+/-).
- Cierre bien la tapa del compartimento de la batería.
- Deseche la batería vieja de forma responsable según las regulaciones locales.
Solución de problemas
- El control remoto no responde:
- Compruebe que la batería esté correctamente instalada y tenga suficiente carga. Reemplácela si es necesario.
- Asegúrese de que no haya obstrucciones entre el control remoto y el receptor del ventilador.
- Verify the fan's power supply is on.
- If the remote is new or has been reset, refer to the fan's original manual for pairing instructions.
- Las luces no se atenúan:
- Ensure the light bulbs installed in your fan are dimmable. Non-dimmable bulbs will not respond to the dimmer function.
- Press and hold the light button to activate the dimming feature.
- Fan not changing speeds:
- Confirm the fan is receiving power.
- Try pressing the fan speed buttons multiple times.
Presupuesto
- Modelo: Anderic TRA049G1M
- Frecuencia: 304.25 MHz
- Tipo de batería: 1 x A23 (12V) (not included)
- Compatibilidad: Harbor Breeze 2AQZU-18052, TR326A 2AQZU-18007, Summersville collection Ceiling Fans (4L000015190 KIT, MRAC04S1M-LD-F0 RECEIVER)
Garantía y soporte
For warranty information or technical support, please contact Anderic customer service. Keep your purchase receipt as proof of purchase. You may also find additional resources by scanning the QR code on the back of your remote or visiting the provided link: https://qr.link/CpbUBA.
