1. Producto terminadoview
The KING LPWV2715-CT24 is a robust, vandal-resistant electric heater designed for high-traffic and public areas such as detention facilities, public restrooms, and rest areas. Its heavy-duty construction, including a 3/16-inch solid steel frame and grill, provides exceptional durability against impact and abuse. Tamper-resistant screws secure the grill, and controls are recessed to prevent unauthorized access. This unit offers moderate wattage and high airflow to effectively heat entryways and hallways, preventing drafts from affecting the building's core temperature.

Imagen 1: Frente view of the KING LPWV2715-CT24 Vandal Resistant Heater, showcasing su robusto metal casing and grill.
Características principales:
- Impact/Vandal Resistant: Constructed with a heavy grill and 3/16-inch solid steel frame.
- Pic-A-Watt Elements: Allows for multiple wattage options to suit specific heating requirements.
- Tamper Resistant 3 Position Switch: Offers Fan, Heat, and Off settings, designed to prevent unauthorized adjustments.
- Protección contra sobrecalentamiento: Función de seguridad integrada para evitar el sobrecalentamiento.
2. Información de seguridad
Read all instructions carefully before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- Instalacion electrica: This heater operates on 277 Volts and requires hardwiring. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
- Toma de tierra: This heater must be properly grounded to reduce the risk of electric shock.
- Ubicación: Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored or used. Maintain proper clearances from combustible materials as specified in the installation section.
- Protección contra sobrecalentamiento: The heater is equipped with a thermal cut-out to prevent overheating. If the heater shuts off due to overheating, allow it to cool down before attempting to restart. Investigate and correct the cause of overheating.
- No cubrir: Never cover the heater or block its air inlets/outlets. This can cause overheating and fire.
- Mantenimiento: Desconecte la alimentación antes de realizar cualquier mantenimiento o limpieza.
3. Contenido del paquete
Verifique que todos los componentes estén presentes y sin daños al abrir el paquete:
- KING LPWV2715-CT24 Vandal Resistant Heater Unit
- Hardware de montaje (normalmente incluido)
- Manual de instrucciones (este documento)
Si falta algún artículo o está dañado, comuníquese con su proveedor de inmediato.
4. Instalación
ADVERTENCIA: Installation must be performed by a qualified electrician. Disconnect all power to the circuit at the main service panel before attempting any wiring.
4.1 Ubicación de montaje
- This heater is designed for indoor, wall-mount installation.
- Choose a location that allows for proper air circulation and maintains required clearances from walls, ceilings, and floors. Refer to local codes for specific clearance requirements.
- Ensure the mounting surface is structurally sound to support the heater's weight (approximately 36 pounds).
4.2 Conexión eléctrica
- The LPWV2715-CT24 heater requires a dedicated 277 Volt, 60 Hz, single-phase circuit.
- El calentador consume 5.4 Amps at 277V, providing 1500 Watts of heat. Ensure the circuit breaker and wiring are appropriately sized for this load.
- Connect the heater directly to the electrical supply using appropriate hardwiring methods and connectors, following the wiring diagram provided inside the heater's access panel.
- Asegúrese de que todas las conexiones estén firmes y seguras.
5. Operación
Once properly installed and powered, the heater can be operated using its tamper-resistant 3-position switch.
5.1 configuraciones del interruptor de encendido
- OFF: The heater is completely off, and no heat or fan operation will occur.
- VENTILADOR: The fan operates continuously without engaging the heating elements. This can be used for air circulation.
- CALOR: The heating elements and fan operate to provide warmth. The heater will cycle on and off to maintain the desired temperature if connected to an external thermostat (not included).
5.2 vatiostage Selection (Pic-A-Watt)
The LPWV series heaters feature Pic-A-Watt elements, allowing for field-adjustable wattage settings. Refer to the wiring diagram inside the heater for instructions on how to adjust the wattage to suit specific room requirements. This adjustment should only be performed by a qualified technician with power disconnected.
6. Mantenimiento
El mantenimiento regular garantiza un rendimiento óptimo y una larga vida útil de su calentador. Desconecte siempre la alimentación del disyuntor antes de realizar cualquier mantenimiento.
- Limpieza: Limpie periódicamente el exterior del calentador con un paño suave.amp Paño. No utilice limpiadores abrasivos ni disolventes.
- Entradas/Salidas de aire: Ensure that the air inlets and outlets are free from dust, lint, and other obstructions. Use a vacuum cleaner with a brush attachment to gently clean the grill and internal components if accessible.
- Inspección: Annually inspect the heater for any signs of damage, loose wiring, or unusual wear. If any issues are found, contact a qualified electrician for repair.
7. Solución de problemas
Antes de contactar con el servicio de atención al cliente, vuelva aview Los siguientes problemas comunes y soluciones:
| Problema | Posible causa | Solución |
|---|---|---|
| El calentador no enciende. | No hay suministro de energía; disyuntor disparado; cableado suelto. | Check circuit breaker; Ensure power switch is in 'HEAT' or 'FAN' position; Consult a qualified electrician to check wiring. |
| El calentador no produce calor, pero el ventilador funciona. | Switch in 'FAN' position; Heating elements failed; Overheat protection activated. | Set switch to 'HEAT'; Allow heater to cool if overheat protection tripped; Contact a qualified electrician for element inspection. |
| El calentador se enciende y apaga con frecuencia. | Improper thermostat setting (if applicable); Restricted airflow; Overheat protection cycling. | Adjust thermostat setting; Clear any obstructions from air inlets/outlets; Ensure proper clearances. |
| Ruidos u olores inusuales. | Loose components; Dust accumulation on elements; Motor issue. | Disconnect power immediately; Inspect for loose parts; Clean heater; Contact a qualified electrician for inspection. |
Si el problema persiste después de intentar estas soluciones, comuníquese con el servicio de atención al cliente o con un electricista calificado.
8. Especificaciones
| Especificación | Detalle |
|---|---|
| Marca | REY |
| Número de modelo | LPWV2715-CT24 |
| Volumentage | 277 voltios |
| Ampanhelo | 5.4 Amps |
| Quétage | 1500 vatios |
| Dimensiones del producto (Pr. x An. x Al.) | 4" de profundidad x 13.75" de ancho x 22.75" de alto |
| Peso del artículo | 36 libras |
| Tipo de montaje | Montaje en pared |
| Tipo de combustible | Eléctrico |
| Uso en interiores y exteriores | Interior |
| Característica especial | Protección contra sobrecalentamiento |
| Código Postal | 093319183731 |
| ASIN | B0G3SWW2XK |
9. Garantía y soporte
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official KING webSitio. Conserve su recibo de compra como comprobante para reclamaciones de garantía.
Fabricante: KING Electrical Manufacturing
Websitio: www.king-electric.com (ExampEl enlace, por favor verificar oficial websitio)