Phanteks XT View Matrix Mid-Tower Gaming Case Instruction Manual

1. Introducción

The Phanteks XT View Matrix is a high-performance mid-tower gaming case designed for enthusiasts. It features an immersive 600 LED Matrix screen, dual tempered glass panels, and optimized airflow for superior cooling. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case.

Image 1.1: The Phanteks XT View Matrix Mid-Tower Gaming Case, showcasing its white exterior and vibrant RGB fans visible through the tempered glass panels.

2. Información de seguridad

Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in injury or damage to the product.

• Desconecte siempre la fuente de alimentación de la toma de pared antes de realizar cualquier instalación o mantenimiento.
• Evite exponer la carcasa a la humedad o temperaturas extremas.
• Manipule los paneles de vidrio templado con cuidado para evitar roturas.
• Mantenga los componentes pequeños y las herramientas fuera del alcance de los niños.
• Asegure una conexión a tierra adecuada para evitar riesgos eléctricos.

3. Guía de instalación

This section outlines the steps for installing your PC components into the Phanteks XT View Matrix case.

3.1. Preparación del caso

Remove the side panels by unscrewing the thumbscrews at the rear of the case and gently sliding the panels off. For tempered glass panels, exercise caution.

Imagen 3.1: Interno view of the case, highlighting various mounting points for components such as fans, storage drives, and cable management routes.

3.2. Instalación de la placa base

1. Instale el protector de E/S en la abertura trasera de la carcasa.
2. Align your motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's screw holes.
3. Asegure la placa base con los tornillos proporcionados.

3.3. Instalación de la fuente de alimentación (PSU)

1. Ubique el área de montaje de la fuente de alimentación en la parte inferior trasera de la carcasa.
2. Slide the PSU into its designated bay.
3. Asegure la fuente de alimentación con tornillos desde la parte trasera de la carcasa.

Imagen 3.2: Parte interna trasera view of the case, illustrating the power supply unit (PSU) mounting area and various drive bays.

3.4. Instalación de la unidad de almacenamiento

The case supports multiple 2.5" SSDs and 3.5" HDDs. Refer to the case's internal layout for specific mounting locations.

• Unidades SSD de 2.5": Mount SSDs to the dedicated 2.5" brackets, typically located behind the motherboard tray.
• Discos duros de 3.5": Install HDDs into the drive cages, usually found beneath the PSU shroud.

3.5. Instalación de la tarjeta de expansión (GPU)

1. Retire las cubiertas de las ranuras de expansión necesarias de la parte trasera de la carcasa.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on the motherboard.
3. Asegure la tarjeta con tornillos.

Imagen 3.3: Un interior view of the case with a graphics card, CPU cooler, and fans already installed, demonstrating component compatibility and layout.

3.6. Instalación del ventilador y del radiador

The XT View Matrix supports up to 9 x 120mm fan positions and full 360mm radiator support at the top. The case includes 3 M25-120 D-RGB fans.

• Mount additional fans or radiators to the designated areas using the provided screws.
• Connect fan and RGB cables to your motherboard or a compatible controller.

3.7. Gestión de cables

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

4. Instrucciones de funcionamiento

4.1. Encendido

After all components are installed and cables are connected, press the power button located on the front I/O panel to start your system.

4.2. Puertos de E/S frontales

The front I/O panel provides convenient access to:

• 1x USB-C 3.2 Gen2 port
• 1 puerto USB 3.0
• Botones de encendido y reinicio
• Lighting control buttons (no software needed for basic control)
• Mic/Headphone jacks

4.3. 600 LED Matrix Display Control

The integrated 600 LED Matrix screen can display dynamic system statistics, animations, and custom visuals. To fully customize the display, download and install the Phanteks Nexlinq app.

Image 4.1: The 600 LED Matrix screen displaying dynamic content, with an overlay of the Phanteks Nexlinq app interface for customization.

Imagen 4.2: Varios examples of information and patterns that can be displayed on the 600 LED Matrix screen, including system stats and custom graphics.

5. Mantenimiento

El mantenimiento regular ayuda a garantizar un rendimiento óptimo y la longevidad de los componentes de su PC.

5.1. Limpieza

• Filtros de polvo: Periodically remove and clean the dust filters (if applicable) to maintain good airflow.
• Interior: Use compressed air to remove dust from inside the case, especially from fans and heatsinks.
• Exterior: Limpie las superficies exteriores con un paño suave, damp paño. Evite los limpiadores abrasivos.

5.2. Mantenimiento del ventilador

Ensure fans are free from obstructions and spinning correctly. If a fan becomes noisy or stops working, consider replacing it.

6. Solución de problemas

Si encuentra problemas con la compilación de su PC, tenga en cuenta los siguientes pasos comunes de solución de problemas:

• Sin energía: Check all power connections, including the PSU to wall outlet, PSU to motherboard, and front panel power switch cable.
• Los ventiladores no giran/no hay RGB: Verify fan and RGB cables are correctly connected to the motherboard or controller. Check software settings for RGB control.
• LED Matrix Display Issues: Ensure the display cable is securely connected. If using the Nexlinq app, check for software updates or reinstall the application.
• Calentamiento excesivo: Ensure all fans are installed correctly and spinning. Check for dust buildup and clean filters. Verify proper thermal paste application on CPU.

7. Especificaciones

8. Garantía y soporte

Para obtener información sobre la garantía y soporte técnico, consulte el sitio web oficial de Phanteks. webSitio web o contacte directamente con el servicio de atención al cliente. Conserve su comprobante de compra para reclamaciones de garantía.

Phanteks Oficial Websitio: www.phanteks.com