1. Introducción
The BSIDE EMT01 is a professional handheld digital wood moisture meter designed for accurately measuring the moisture content of various wood types, paperboard, and dry cargo. It utilizes the electrical resistance principle for precise measurements and features a large HD LCD display for clear readings. This manual provides detailed instructions for the safe and effective use of your device.
2. Información de seguridad
- The electrode measurement pins are extremely sharp. Exercise caution when handling the instrument to prevent injury.
- Always cover the pins with the protective cap when the instrument is not in use.
- Do not attempt to measure live electrical circuits. This device is for wood moisture measurement only.
- Mantenga el dispositivo alejado del agua y de entornos con alta humedad para evitar daños.
- No exponga el dispositivo a temperaturas extremas ni a la luz solar directa.
- Mantener fuera del alcance de los niños.
3. Producto terminadoview
- Pasadores de medida
- Icono de batería baja
- Lectura de medición LCD
- Indicador de retención
- Wood group designators (A, B, C, D)
- Botón de encendido y apagado
- Botón de modo para seleccionar grupos de madera.
- Mantener pulsado el botón
- Descripción sencilla de cada grupo de madera.
4. Configuración
4.1 Instalación de la batería
- Localice la tapa del compartimiento de la batería en la parte posterior del dispositivo.
- Deslice o desenganche la cubierta para abrirla.
- Inserte una batería de 9 V, asegurándose de la polaridad correcta (+/-).
- Vuelva a colocar la tapa del compartimiento de la batería de forma segura.
Nota: Las baterías no están incluidas en el paquete.
5. Instrucciones de funcionamiento
5.1 Encendido y apagado
- Press the red Power On-Off button (6) to turn the meter on.
- El medidor se apagará automáticamente después de aproximadamente 15 minutos de inactividad para conservar la vida útil de la batería.
- To manually turn off, press and hold the Power On-Off button (6).
5.2 Selecting Wood Groups
The meter has four built-in wood patterns (A, B, C, D) for precise testing across different wood species. Refer to the 'Wood Species Group Table' below to identify the correct group for your material.
- With the meter powered on, press the 'MODE' button (7) to cycle through the wood groups (A, B, C, D).
- Select the group that corresponds to the wood species you are testing. The selected group will be indicated on the LCD display (5).
| Grupo | Especies de madera |
|---|---|
| A | Teak, Walnut, Afromosia, Rubber Tree, Imbuia, Kokrodua, Niove Bidinkala, Cork |
| B | Keruing, White Poplar, Beech, Cedar, Tola |
| C | Lauan, Ash, Elm, Fir, Maple, Padauk, Oak, Cherry |
| D | Basswood, Larch, Pine, Birch |
5.3 Realización de una medición
- Ensure the correct wood group is selected.
- Carefully remove the protective cap from the measurement pins.
- Firmly press the measurement pins (1) into the surface of the wood or material you wish to test. Ensure both pins penetrate the material.
- Read the moisture value displayed on the LCD screen (3). The value will be shown as a percentagmi (%).
- Once the measurement is complete, gently remove the pins from the material.
Video 1: Demonstration of the wood moisture meter in use.
5.4 Función de retención
Para congelar la lectura de medición actual en la pantalla:
- While taking a measurement, press the 'HOLD' button (8). The 'HOLD' indicator (4) will appear on the LCD.
- El valor mostrado permanecerá fijo, lo que le permitirá registrarlo.
- Press the 'HOLD' button (8) again to release the hold function and resume live measurements.
6. Mantenimiento
- Limpieza: Limpie el medidor con un paño seco y suave. No utilice limpiadores abrasivos ni disolventes.
- Almacenamiento: When not in use, always replace the protective cap over the measurement pins. Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the battery to prevent leakage.
- Reemplazo de batería: If the low battery icon (2) appears on the display, replace the 9V battery as soon as possible to ensure accurate readings.
7. Solución de problemas
- No hay pantalla/El medidor no se enciende:
- Check if the battery is installed correctly with the right polarity.
- Replace the 9V battery with a new one. - Lecturas inexactas:
- Ensure the correct wood group is selected for the material being tested.
- Make sure the measurement pins are fully inserted into the material.
- Check if the pins are clean and free from debris or corrosion.
- Replace the battery if the low battery indicator is on. - 'HOLD' Indicator Stuck:
- Press the 'HOLD' button again to release the function.
8. Especificaciones
| Característica | Descripción |
|---|---|
| Tipo de pantalla | DIGITAL (Large LCD characters display) |
| Principio de medición | Resistencia eléctrica |
| Rango de medición | Wood: 0 - 99.9% |
| Resolución | 0.1% |
| Exactitud | ±0.5% |
| Longitud del electrodo | 10 mm (0.4") |
| Electrode Pins | Integrado |
| Apagado automático | Después de aprox. 15 minutos |
| Fuente de alimentación | 1 batería de 9 V (no incluida) |
| Vivienda del medidor | Plástico ABS |
| Temperatura de funcionamiento | 0 a 40 °C (32 a 104 °F) |
| Dimensiones | 145 x 67 x 32 mm (5.7" x 2.6" x 1.3") |
| Peso | 200 g (7.0 onza) |
| Iluminar desde el fondo | Sí |
| Proceso de dar un título | CE, FCC, RoHS |
9. Consejos para el usuario
- For consistent readings, try to insert the pins to a similar depth each time.
- When testing rough or uneven surfaces, ensure good contact with both pins.
- If testing a large piece of wood, take multiple readings at different points and average them for a more representative moisture content.
- Remember to select the correct wood group for the most accurate results.
10. Garantía y soporte
This BSIDE EMT01 Digital Wood Moisture Meter comes with a 1-year warranty. For technical support, warranty claims, or further assistance, please contact the BSIDE International Store directly through your purchase platform. Please retain your proof of purchase for warranty validation.