WEP 992D-III 2-in-1 Hot Air Rework and Soldering Station Instruction Manual

1. Introducción

The WEP 992D-III is a versatile 2-in-1 hot air rework station and precision soldering iron designed for electronic repair and assembly. It features a microcomputer digital display for precise temperature control, quick heating capabilities, and user-friendly functions to enhance efficiency and safety in various applications, including micro-sized SMD component work.

2. Instrucciones de seguridad

• Utilice siempre la estación en una zona bien ventilada para evitar inhalar humos.
• Use equipo de protección personal (EPP) adecuado, incluidas gafas de seguridad y guantes resistentes al calor.
• Asegúrese de que la fuente de alimentación coincida con el volumen.tage requisitos de la unidad.
• No toque la boquilla de la pistola de aire caliente ni la punta del soldador cuando estén en uso o inmediatamente después de su uso, ya que alcanzan temperaturas muy altas.
• Coloque la pistola de aire caliente y el soldador en sus respectivos soportes cuando no estén en uso.
• Mantenga los materiales inflamables lejos del área de trabajo.
• Desenchufe la unidad de la toma de corriente cuando no esté en uso o antes de realizar cualquier mantenimiento.
• Do not use the unit if the power cord or any part of the station is damaged.

3. Contenido del paquete

The WEP 992D-III is available in different packages. Please verify your package contents upon receipt.

Paquete 1:

• 1 x WEP 992D-III Station
• 1 x pistola de aire caliente
• 5 x Hot Air Nozzles (various sizes: Φ4mm, Φ7mm, 11x11mm, Φ9mm)
• 1 x C245 Soldering Iron
• 3 x C245 Soldering Iron Tips (I, 3.2K, 3.2D)

Paquete 2:

• 1 x WEP 992D-III Station
• 1 x pistola de aire caliente
• 5 x Hot Air Nozzles (various sizes: Φ4mm, Φ7mm, 11x11mm, Φ9mm)
• 1 x C245 Soldering Iron
• 3 x C245 Soldering Iron Tips (I, 3.2K, 3.2D)
• 1 x C210 Soldering Iron
• 3 x C210 Soldering Iron Tips (I, K, SI)

Consejos para el soldador:

The station supports various soldering iron tips for different applications:

4. Características del producto

• Funcionalidad 2 en 1: The hot air gun and soldering iron can be operated simultaneously or independently.
• Salida de alta potencia: 1220W for the hot air gun (with 245 handle) or 1140W (with 210 handle).
• Calentamiento rápido: Soldering iron reaches set temperature in approximately 2 seconds.
• Amplio rango de temperatura:
  • Hot Air Rework Station: 100℃ to 500℃ (212℉ to 932℉)
  • Soldering Station: 90℃ to 450℃ (194℉ to 842℉)
• Pantalla digital: LCD screen for clear temperature readings.
• Tres canales preestablecidos: Conveniently store and recall three different temperature settings for both the hot air gun and soldering iron.
• Remote Control Temperature Adjustment: Adjust temperature directly from the hot air gun and soldering iron handles.
• Calibración de temperatura: Allows for precise adjustment to correct any temperature discrepancies.
• Modo de suspensión y apagado automático: Extends heating element lifespan and conserves energy.
• Quick-Change Nozzles/Tips: Easy and tool-free installation and replacement of hot air nozzles and soldering tips.
• C245/C210 Compatibility: Supports both C245 (290W) and C210 (210W) handpieces for precision soldering of micro-sized SMD components.

5. Configuración

1. Desembalaje: Retire con cuidado todos los componentes del embalaje. Inspeccione si presentan daños.
2. Colocación: Place the main unit on a stable, heat-resistant surface in a well-ventilated area. Ensure adequate space around the unit for airflow.
3. Conectar la pistola de aire caliente: Connect the hot air gun cable to the designated port on the main unit.
4. Instalar la boquilla de aire caliente: Select the appropriate hot air nozzle for your task. The nozzles are quick-change and do not require tools for installation or removal. Simply push the nozzle onto the hot air gun's tip until it clicks into place.

   

   

5. Conectar el soldador: Connect the soldering iron cable to its dedicated port on the main unit.
6. Instalar la punta de soldadura: Insert the desired soldering tip into the soldering iron handpiece. Ensure it is securely seated.
7. Conexión de energía: Connect the power cord to the main unit and then to a suitable power outlet. Ensure the plug type matches your region's standard.

   

6. Instrucciones de funcionamiento

6.1 Encendido y apagado

• Flip the main power switch on the front panel to turn the unit on or off.

6.2 Funcionamiento de la pistola de aire caliente

1. Ajuste de temperatura: Use the "TEMP" up/down buttons on the main unit to set the desired hot air temperature (100℃ to 500℃).
2. Ajuste del flujo de aire: Use the "AIR" knob to adjust the airflow rate.
3. One-Button Conversion (Hot/Cold Air): Press the blue button on the hot air gun handle to switch between heating mode and cold air mode.

   

4. Canales preestablecidos: Use the CH1, CH2, CH3 buttons on the main unit to quickly recall pre-set hot air temperature and airflow settings. To save a setting, adjust to the desired temperature/airflow, then press and hold the desired channel button until it beeps.

   

6.3 Funcionamiento del soldador

1. Ajuste de temperatura: Use the "TEMP" up/down buttons on the main unit to set the desired soldering iron temperature (90℃ to 450℃).
2. Ajuste rápido de temperatura con botón: The soldering iron handle features buttons to quickly adjust the temperature up or down.

   

3. Canales preestablecidos: Use the CH1, CH2, CH3 buttons on the main unit to quickly recall pre-set soldering iron temperature settings. To save a setting, adjust to the desired temperature, then press and hold the desired channel button until it beeps.

6.4 Hotkey Operation (Advanced Settings)

Press and hold the "MENU" button for about 2 seconds to access advanced settings like Buzzer ON/OFF, Temperature Display Mode (°C/°F Conversion), and Digital Temperature Calibration.

7. Mantenimiento

• Limpieza: Limpie periódicamente la punta del soldador con unamp sponge or brass wool. Clean the hot air gun nozzle and the main unit with a soft, dry cloth. Ensure the unit is unplugged and cool before cleaning.
• Cuidado de la punta: Always tin the soldering iron tip before storing it to prevent oxidation.
• Modo de suspensión y apagado automático: The unit features a sleep mode for the soldering iron (when placed in its holder) and an auto-shutdown function (5 minutes after sleep mode) to prolong the lifespan of the heating elements and save energy.

  

• Almacenamiento: Guarde la unidad en un entorno seco y libre de polvo cuando no esté en uso.

8. Solución de problemas

• La unidad no se enciende:
  • Compruebe si el cable de alimentación está conectado de forma segura tanto a la unidad como a la toma de corriente.
  • Asegúrese de que el interruptor de encendido esté en la posición "ENCENDIDO".
  • Verifique que la toma de corriente funcione.
• La pistola de aire caliente o el soldador no calientan:
  • Check if the temperature is set correctly on the display.
  • Ensure the hot air gun or soldering iron is properly connected to the main unit.
  • If the heating element is suspected to be damaged, refer to the warranty information.
• Lecturas de temperatura inexactas:
  • Perform a temperature calibration as described in the Hotkey Operation section.
• No hay flujo de aire desde la pistola de aire caliente:
  • Check the airflow knob setting.
  • Ensure the hot air gun is not obstructed.

9. Especificaciones

10. Consejos para el usuario

• VolumentagCompatibilidad: Confirme siempre el volumentage of your unit (e.g., 110V US, 220V EU, 230V UK, 240V AU) matches your local power supply to prevent damage. The product is available in various plug types to suit different regions.
• Trabajo de precisión: For micro-sized SMD components, consider using the C210 handpiece for finer control and lower power, if available in your package.
• Canales preestablecidos: Utilize the three preset channels for frequently used temperature settings to save time and ensure consistent results for repetitive tasks.

11. Garantía y soporte

The WEP 992D-III comes with a 24-month warranty. This warranty covers specific issues related to product functionality and components.

Cobertura de la garantía:

• El artículo no se puede encender.
• La función no se puede utilizar.
• The air gun or soldering iron works abnormally.
• The heating element of the air gun or soldering iron is damaged.
• El transformador o el portafusibles está dañado.

Conditions for Warranty Service:

• The order is not in dispute and has not been refunded.
• The item has not been disassembled and repaired by unauthorized personnel.
• The buyer is responsible for the freight costs associated with the replacement of parts.

Importante: The free replacement applies only to broken parts, not the entire product. If you require warranty service, please contact customer support and provide a video demonstrating the product's quality problem.